6 Volt Fuel Pumps
6 Volt Fuel Pumps

6 Volt Fuel Pumps

6 Volt Fuel Pumps.

On this page you will find fuel pumps specifically for vehicles with a 6 Volt electrical system.

6 Volt Fuel Pumps

!
WFP509
Airtex 6 Volt Low-Pressure Fuel Pump

Airtex 6 Volt Low-Pressure Fuel Pump

This is a special fuel pump for vehicles with a 6 Volt electrical system.

Thanks to its low output pressure of 4.4 PSI / 0.3 Bar, it usually does not require a pressure regulator but please check your system requirements to make sure.

Pump specification:

  • Flow rate: 8 Gallons/hour - 30 liters/hour
  • Pressure: 4.4 PSI / 0.3 Bar
  • Pipe union thread size: 1/8" NPTF tapered thread
  • Power supply: 6 Volt Negative Earth
  • Suitable for nearly all fuels, including modern ones, but NOT suited for Methanol

Kit includes:

  • Pump
  • In-line fuel filter
  • Mounting bracket and materials
  • 8 mm inlet and outlet unions with fuel hose and hose clips
  • Installation instructions

Couplings Specifications:
Connection to pump body: 1/8" NPTF tapered thread
Fuel Unions for fuel lines with 8 mm internal diameter

Always operate this pump with the proper filter installed as failure to do so will void the warranty!
Replacement filters can be found HERE.

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

Airtex 6 Volt Low-Pressure Fuel Pump

67263TS
Roll of Superior Quality PTFE Thread Sealing Tape

Roll of Superior Quality PTFE Thread Sealing Tape

Roll of superior quality PTFE tape, used to thoroughly seal the connection of screw-in couplings on the bodies of fuel pumps, pressure regulators, fuel filters and the likes.

12 millimeter wide

Roll of 12 meters (around 36 ft. !); probably enough to last you a life-time!

As an alternative, you can use our Loctite 243 Thread Locker which will offer the added avantage of securing the connection.

 

 

Roll of Superior Quality PTFE Thread Sealing Tape

LOCTITE-542-10ML
10 ml Loctite 542 Thread Sealant

10 ml Loctite 542 Thread Sealant

Newly arrived 10 ml Loctite 542 Thread Sealant

LOCTITE 542

Thread Sealant - medium strength.
For fine threads in hydraulic, pneumatic and general fittings.
Fast curing.

LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies.
The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration.
The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.

Your Benefits:

  • Ideal for fine threads as used in hydraulic, pneumatic & general fittings
  • Suitable for metal threads only
  • Instant low-pressure seal
  • Resistant to fuel, oil, coolants and hydraulic fluids
  • Locks connection against vibration loosening
  • DVGW approval (EN 751-1): NG-5146AR0855

Excellently suited for sealing connections on carburetors and fuel pumps!

10 ml Loctite 542 Thread Sealant