Mangoletsi Design Carburettor Linkage Systems
Mangoletsi Design Carburettor Linkage Systems

Mangoletsi Design

Mangoletsi Design Carburettor Linkage Systems

Mangoletsi Design Carburettor Linkage Systems

!
M4810A
Mangoletsi Design Weber DCOE - Dellorto DHLA - Manifold for BMW 2002 - 2000 - M10

Mangoletsi Design 40 Millimeter Weber DCOE / Dellorto DHLA / Solex ADDHE Manifold for BMW 2002 - 2000 - M10

Newly arrived Mangoletsi Design 40 Millimeter Weber DCOE / Dellorto DHLA / Solex ADDHE Manifold for BMW 2002 - 2000 - M10

Here we have a specially cast manifold to fit the 2 liter versions of the BMW M10 engine as used in the BMW 2002 and BMW 2000 Neue Klasse (New Class) cars.

Designed and produced by John Mangoletsi's company "Mangoletsi Design", it was produced to mate 2 Weber DCOE40, 2 Dellorto DHLA40 or 2 Solex ADDHE40 carburetors to the cilinderhead of the 2 liter M10.

It is drilled and tapped to accept a standard size BMW brake servo vacuum line union with thread 22 x 1.5 mm.

Comes complete the studs and Nyloc nuts as per the picture.

The casting is thick-walled and could be machined to accept 45 mm versions of the above carburetors.

Our Misab Plates and Cosworth Buffers are excellently suited join the carburettors to this manifold.
When desired, you can order these right along with the manifold by selecting them through the dropbox above.

Of course we can supply you with correct Weber DCOE, Dellorto DHLA or Solex ADDHE carburetors to fit this set. Please contact us to discuss your needs. Our contact page can be found HERE.

We can also supply you with fitting linkage kits which can be found HERE.

Mangoletsi Design Weber DCOE - Dellorto DHLA - Manifold for BMW 2002 - 2000 - M10

MRODS
Mangoletsi Adjustable Linkage Rod with Ball and Socket Connectors

Mangoletsi Adjustable Linkage Rod with Ball and Socket Connectors

Mangoletsi Adjustable Linkage Rod with Ball and Socket Connectors

Designed and produced by John Mangoletsi's company "Mangoletsi Design", it is a heavy duty linkage rod with ball ends.

Left-handed M5 thread at one end and right-handed M5 thread at the other for easy adjustment.

Threaded rods can be cut to give shorter length.

Available in the following sizes:

  • Adjustable between 54 and 64 mm
  • Adjustable between 62 and 116 mm
  • Adjustable between 108 and 166 mm
  • Adjustable between 152 and 216 mm

Mangoletsi Adjustable Linkage Rod with Ball and Socket Connectors

LP4241
Fully adjustable Mangoletsi Weber DCOE linkage kit - SINGLE cable

Fully adjustable Mangoletsi Weber DCOE linkage kit - SINGLE cable

Fully adjustable linkage kit for Weber DCOE carburetors mounted as pairs or singles.

Please note that this set is NOT suitable for Weber DCO/SP carburetors!

Designed and produced by John Mangoletsi's company "Mangoletsi Design", it is low profile and therewith suitable for height restricted applications.

This kit includes:

  • Cast mounting bracket with fully assembled linkage mechanism
  • Linkage lever and balance lever for connecting to second carburetor
  • "Tongue" of drive lever is 40 mm long, so it can be used on wide spaced carburetors or cut to size for close coupled ones
  • Adjustable ball rod bar complete with dust seals and retaining clips
  • Longer top cover screws for fitting cast bracket to carburetor
  • 2 Allen keys for assembly
  • Spares kit

Click here to download the assembly instructions.

Fully adjustable Mangoletsi Weber DCOE linkage kit - SINGLE cable

LP4245
Fully adjustable Mangoletsi Weber DCOE linkage kit - DOUBLE cable

Fully adjustable Mangoletsi Weber DCOE linkage kit - DOUBLE cable

Fully adjustable linkage kit for Weber DCOE carburetors mounted as pairs or singles.

Please note that this set is NOT suitable for Weber DCO/SP carburetors!

Designed and produced by John Mangoletsi's company "Mangoletsi Design", it is low profile and therewith suitable for height restricted applications.

This kit includes:

  • Cast mounting bracket with fully assembled linkage mechanism
  • Linkage lever and balance lever for connecting to second carburetor
  • The "tongue" of drive lever is 40 mm long, so it can be used on wide spaced carburetors or cut to size for close coupled ones
  • Adjustable ball rod bar complete with dust seals and retaining clips
  • Longer top cover screws for fitting cast bracket to carburetor
  • Cable assemblies: 1000 mm outer, 1450 mm inner
  • Adjustable bulkhead feed-through
  • Twin cable pedal adapter block
  • 2 Allen keys for assembly
  • Spares kit

Click here to download the assembly instructions.

Fully adjustable Mangoletsi Weber DCOE linkage kit - DOUBLE cable

LP4301
Fully adjustable Mangoletsi Dellorto DHLA linkage kit - SINGLE cable

Fully adjustable Mangoletsi Dellorto DHLA linkage kit - SINGLE cable

Fully adjustable linkage kit for Dellorto DHLA carburettors mounted as pairs or singles.

Designed and produced by John Mangoletsi's company "Mangoletsi Design", it is low profile and therewith suitable for height restricted applications.

This kit includes:

  • Cast mounting bracket with fully assembled linkage mechanism
  • Linkage lever and balance lever for connecting to second carburettor
  • "Tongue" of drive lever is 40 mm long, so it can be used on wide spaced carburettors or cut to size for close coupled ones
  • Adjustable ball rod bar complete with dust seals and retaining clips
  • Longer top cover screws for fitting cast bracket to carburettor
  • 2 Allen keys for assembly
  • Spares kit

Click here to download the assembly instructions.

Fully adjustable Mangoletsi Dellorto DHLA linkage kit -  SINGLE cable

LP4303
Fully adjustable Mangoletsi Dellorto DHLA linkage kit - DOUBLE cable

Fully adjustable Mangoletsi Dellorto DHLA linkage kit - DOUBLE cable

Fully adjustable linkage kit for Dellorto DHLA carburettors mounted as pairs or singles.

Designed and produced by John Mangoletsi's company "Mangoletsi Design", it is low profile and therewith suitable for height restricted applications.

This kit includes:

  • Cast mounting bracket with fully assembled linkage mechanism
  • Linkage lever and balance lever for connecting to second carburettor
  • “Tongue” of drive lever is 40 mm long, so it can be used on wide spaced carburettors or cut for close coupled
  • Adjustable ball rod bar complete with dust seals and retaining clips
  • Longer top cover screws for fitting cast bracket to carburettor
  • Cable assemblies, 1000 mm outer, 1450 mm inner
  • Adjustable bulkhead feedthrough
  • Twin cable pedal adapter block
  • 2 Allen keys for assembly
  • Spares kit

Click here to download the assembly instructions.

Please note that the carburetor that is depicted in the photo is NOT included!

Fully adjustable Mangoletsi Dellorto DHLA linkage kit - DOUBLE cable

M1281
(101) Mangoletsi Main Lever Assembly with extra long tongue for Weber DCOE and DCO/SP carburetors

(101) Mangoletsi Main Lever Assembly with extra long tongue for Weber DCOE and DCO/SP carburetors

Main command lever with extra long tongue for the Weber DCOE and DCO SP carburetors.

Designed and produced by John Mangoletsi's company "Mangoletsi Design", the lever is equipped with a 40 mm long "tongue" and can therewith be used in situations where the carburetor spacing is wider than standard.

This lever matches up with balance lever assembly 45048.149.

Required quantity per set of carburetors: 1

This is item number 101 in the drawing.

(101) Mangoletsi Main Lever Assembly with extra long tongue for Weber DCOE and DCO/SP carburetors

M1281
Mangoletsi Main Lever Assembly with extra long tongue for Weber DCOM carburetors

Mangoletsi Main Lever Assembly with extra long tongue for Weber DCOM carburetors

Main command lever with extra long tongue for the Weber DCOM carburetors.

Designed and produced by John Mangoletsi's company "Mangoletsi Design", the lever is equipped with a 40 mm long "tongue" and can therewith be used in situations where the carburetor spacing is wider than standard.

This lever matches up with balance lever assembly 45048.149.

Required quantity per set of carburetors: 1

This is item NOT in the drawing.

Mangoletsi Main Lever Assembly with extra long tongue for Weber DCOM carburetors