24 Volt Fuel Pumps.
On this page you will find fuel pumps specifically for vehicles with a 24 Volt electrical system.
24 Volt Fuel Pumps
Facet 24 Volt fuel pump.
Specifically designed for vehicles and applications with a 24 Volt electrical system.
Please note: this concerns ONLY the pump body... no further connectors or mounting material!
Couplings Specifications:Connection to pump body: 1/4" NPTF tapered thread
It could be that your fuel system operates at a lower pressure than this pump delivers.If this is the case, it requires a pressure regulator to prevent your carburetor(s) from flooding but please check your system requirements to make sure.A variety of pressure regulators can be found HERE.
Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.
We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.
Facet GOLD-FLO 24 Volt Fuel Pump - Pump only
Webcon In-Line Fuel Pressure Gauge Kit.
A fantastically finished set to build your own in-line fuel pressure monitoring system.
Specifically for, low-pressure carburetor systems.NOT suited for high-pressure fuel-injection systems!
The set consists of:
Suitable for flexible fuel lines with an internal diameter of 8 mm.
The adapter is machined from a solid billet of aluminum.
This set is intended to be used on low-pressure fuel systems for carburetors.
A high-pressure set for fuel injection systems can be found HERE.
Spare, brass, blanking plugs can be found HERE.
We advise Loctite 543 Thread Sealant to secure the gauge in the adapter.
Webcon In-Line Fuel Pressure Gauge Kit - 0 - 15 PSI / 0 - 1 Bar
Thread Sealant - medium strength.For fine threads in hydraulic, pneumatic and general fittings.Fast curing.
LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies.The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration.The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.
Excellently suited for sealing connections on carburetors and fuel pumps!
10 ml Loctite 542 Thread Sealant
Threadlocking Adhesive - medium strength.
Suitable for all metal threaded assemblies.
LOCTITE 243 is a general purpose threadlocker of medium bond strength.This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration.The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces.It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.
5 ml Loctite 243 Thread Locker
Roll of superior quality PTFE tape, used to thoroughly seal the connection of screw-in couplings on the bodies of fuel pumps, pressure regulators, fuel filters and the likes.
12 millimeter wide
Roll of 12 meters (around 36 ft. !); probably enough to last you a life-time!
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added avantage of securing the connection.
Roll of Superior Quality PTFE Thread Sealing Tape
Dellorto, Weber and Solex Carburettors Spare Parts Jets Chokes Emulsion Tubes Service Kits