Pierburg Carburetor Service Kits
Pierburg Carburetor Service Kits

Pierburg Carburetor Service Kits

Pierburg Carburetor Service Kits.

On this page you will find our service kits for Pierburg carburettors.

Please note that Pierburg carburetors were also sold under the Solex brand but that small differences between the two do exist.

Our Solex range of service kits can be found HERE.

Pierburg Carburetor Service Kits

!
PMS170
Service Kit for Pierburg 36 1B1 and 1B3 carburetors for Audi 80

Service Kit for Pierburg 36 1B1 and 1B3 carburetors for Audi 80

Service kit for the Pierburg 36 1B1 and 1B3 carburetor as used on:

  • 1979 - 1983 Audi 80 GL, S & L 1300 - 1272 cc
  • 1979 - 1983 Audi 80 GL, S & L 1500 - 1588 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B1 and 1B3 carburetors for Audi 80

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Bedford Astra

Service Kit for Pierburg 36 1B1 carburetors for Bedford Astra

Service kit for the Pierburg 36 1B1 carburetor as used on the Bedford Astra Van 4WD - 1297 cc.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B1 carburetors for Bedford Astra

PMS170
Service Kit for Pierburg 36 1B3 carburetors for Mercedes L410 - L601 - L602 - L611

Service Kit for Pierburg 36 1B3 carburetors for Mercedes L410 - L601 - L602 - L611

Service kit for the Pierburg 36 1B3 carburetor as used on the 2307 cc Mercedes-Benz L410 - L601 - L602 - L611.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B3 carburetors for Mercedes L410 - L601 - L602 - L611

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Opel Ascona C 1600

Service Kit for Pierburg 36 1B1 carburetors for Opel Ascona C 1600

Service kit for the Pierburg 36 1B1 carburetor as used, amongst others, on the:

  • 1584 cc Opel Ascona 1600 N & S, C-generation.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B1 carburetors for Opel Ascona C 1600

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Opel Corsa 1200 and 1300 SR

Service Kit for Pierburg 36 1B1 carburetors for Opel Corsa 1200 and 1300 SR

Service kit for the Pierburg 36 1B1 carburetor as used, amongst others, on the:

  • 1196 cc Opel Corsa 1200
  • 1297 cc Opel Corsa 1300 SR

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B1 carburetors for Opel Corsa 1200 and 1300 SR

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Opel Kadett D 1200 SR

Service Kit for Pierburg 36 1B1 carburetors for Opel Kadett D 1200 SR

Service kit for the Pierburg 36 1B1 carburetor as used, amongst others, on the:

  • 1982 - 1984 1196 cc Opel Kadett D 1200 SR

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B1 carburetors for Opel Kadett D 1200 SR

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Opel Kadett E 1300 N

Service Kit for Pierburg 36 1B1 carburetors for Opel Kadett E 1300 N

Service kit for the Pierburg 36 1B1 carburetor as used, amongst others, on the:

  • 1297 cc Opel Kadett E 1300 N

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B1 carburetors for Opel Kadett E 1300 N

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Opel Manta B 1600

Service Kit for Pierburg 36 1B1 carburetors for Opel Manta B 1600

Service kit for the Pierburg 36 1B1 carburetor as used, amongst others, on the:

  • 1584 cc Opel Manta 1600 N & S, B-generation.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B1 carburetors for Opel Manta B 1600

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Opel Rekord E 1800 S & 1800 N

Service Kit for Pierburg 36 1B1 carburetors for Opel Rekord E 1800 S & 1800 N

Service kit for the Pierburg 36 1B1 carburetor as used, amongst others, on the:

  • 1796 cc Opel Rekord E 1800 N & S

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B1 carburetors for Opel Rekord E 1800 S & 1800 N

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Vauxhall Nova 1300 L

Service Kit for Pierburg 36 1B1 carburetors for Vauxhall Nova 1300 L

Service kit for the Pierburg 36 1B1 carburetor as used, amongst others, on the:

  • 1297 cc Vauxhall Nova 1300 L

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B1 carburetors for Vauxhall Nova 1300 L

PMS170
Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Golf 1500

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Golf 1500

Newly arrived Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Golf

Service kit for the Pierburg 36 1 B3 carburetor as used on, amongst others, the:

  • Volkswagen Golf 1500 S, LS and GLS - 1457 cc.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Golf 1500

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Iltis

Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Iltis

Service kit for the Pierburg 36 1 B1 carburetor as used on, amongst others, the:

  • 1978 - 1983 Volkswagen Iltis 4x4 - 1700 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Iltis

PMS170
Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Jetta 1500

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Jetta 1500

Service kit for the Pierburg 36 1 B3 carburetor as used on, amongst others, the:

  • Volkswagen Jetta 1500 S, LS and GLS - 1457 cc
  • Volkswagen Jetta C, CL and GL - 1457 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Jetta 1500

PMS170
Service Kit for Pierburg 36 1B3 carburetors for Volkswagen LT

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen LT

Service kit for the Pierburg 36 1 B3 carburetor as used on, amongst others, the:

  • 1979 - 1982 Volkswagen LT Van - 1984 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen LT

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Passat 1300

Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Passat 1300

Service kit for the Pierburg 36 1 B1 carburetor as used on, amongst others, the:

  • Volkswagen Passat 1300 (A Motor) - 1272 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Passat 1300

PMS170
Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Passat 1600

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Passat 1600

Service kit for the Pierburg 36 1 B3 carburetor as used on, amongst others, the:

  • 1979 - 1983 Volkswagen Passat 1600 - 1588 cc
  • 1979 - 1983 Volkswagen Passat 1600 Automatic - 1588 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Passat 1600

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Polo 1050

Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Polo 1050

Service kit for the Pierburg 36 1 B1 carburetor as used on, amongst others, the:

  • Volkswagen Polo 1050 - 1043 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Polo 1050

PMS170
Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Scirocco 1500

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Scirocco 1500

Service kit for the Pierburg 36 1 B3 carburetor as used on, amongst others, the:

  • 1979 - 1984 Volkswagen Scirocco 1500 S - 1457 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Scirocco 1500

PMS178
Rebuild Kit for Solex Pierburg 32 DIDTA carburetors for Opel A Ascona 1600 S

Rebuild Kit for Solex Pierburg 32 DIDTA carburetors for Opel A Ascona 1600 S

Rebuild Kit for Solex Pierburg 32 DIDTA carburetors.

Service kit for the Solex and Pierburg DIDTA 32 series carburetors as used on, amongst others, the:

  • 1970 - 1975 Opel Ascona A 1600 S

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Power Valve Diaphragm
  • Complete needle valve size 200
  • Float chamber gasket
  • Base gaskets
  • Choke gaskets
  • All required copper washers
  • All required aluminum washers
  • All required rubber / Viton washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex Pierburg 32 DIDTA carburetors for Opel A Ascona 1600 S

FR4201
Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Hanomag

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Hanomag

Service Kit for Solex Pierburg 30 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 30 series carburetors as, amongst others, some Hanomag models.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • Isolator block
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Hanomag

FR4201
Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Mercedes

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Mercedes

Service Kit for Solex Pierburg 30 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 30 series carburetors as used on, amongst others, some Mercedes Benz models.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • Isolator block
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Mercedes

FR4201
Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Opel Kadett

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Opel Kadett

Service Kit for Solex Pierburg 30 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 30 series carburetors as used on, amongst others, the:

  • 1974 - 1979 Opel Kadett C 1.0 N
  • 1974 - 1979 Opel Kadett C 1.0 S (Export)
  • 1973 - 1979 Opel Kadett C 1.2 N (52 PS)

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • Isolator block
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Opel Kadett

FR4201
Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Opel Olympia

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Opel Olympia

Service Kit for Solex Pierburg 30 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 30 series carburetors as used on, amongst others, on the following cars:

  • 1974 - 1979 Opel Olympia C 1.0 N
  • 1973 - 1979 Opel Olympia C 1.0 S (Export)
  • 1973 - 1979 Opel Olympia C 1.2 N (52 PS)
  • 1976 - 1979 Opel Olympia C 1.2 N (55 PS)

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • Isolator block
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Opel Olympia

PMS246
Service Kit for Pierburg 30 PDSI and 28 PDSIT carburateurs for Ford Taunus

Service Kit for Pierburg 30 PDSI and 28 PDSIT carburateurs for Ford Taunus

Service Kit for the Pierburg 30 PDSI and 28 PDSIT 4 carburetors as fitted on, amongst others, the 1968 - 1971 Ford Taunus 12M P4 1200 - 1300 - 1500.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete Needle Valve Size 150
  • Float Chamber Gasket
  • Base Gasket
  • Choke Housing O-Ring
  • Choke Housing Gasket
  • All Required Copper Washers

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 30 PDSI and 28 PDSIT carburateurs for Ford Taunus

FR3622
Service Kit for Solex Pierburg 32 PDSI carburetors for Ford Taunus

Service Kit for Solex Pierburg 32 PDSI carburetors for Ford Taunus

Service Kit for Solex Pierburg 35 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 32 series carburetors as, amongst others, used on the following cars:

  • 1968 - 1971 Ford Taunus 12M P4 1200 - 1300 - 1500
  • 1968 - 1971 Ford Taunus 12M TS P4

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gaskets
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor service kit.

Service Kit for Solex Pierburg 32 PDSI carburetors for Ford Taunus

PMS137
Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Ascona

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Ascona

Rebuild Kit for Solex Pierburg 35 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 35 series carburetors as used on, amongst others, the:

  • 1972 - 1975 Opel Ascona A 1200
  • 1970 - 1975 Opel Ascona A 1600 N
  • 1975 - 1981 Opel Ascona B 1200
  • 1979 - 1981 Opel Ascona B 1300 N
  • 1975 - 1978 Opel Ascona B 1600
  • 1976 - 1981 Opel Ascona B 1900 N
  • 1981 Opel Ascona C 1300 N & S

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Ascona

PMS137
Service Kit for Solex Pierburg 35 PDSI carburetors for Opel Kadett

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Kadett

Rebuild Kit for Solex Pierburg 35 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 35 series carburetors as used on, amongst others, the:

  • 1970 - 1973 Opel Kadett B 1100 N & S
  • 1971 - 1973 Opel Kadett B 1200 S
  • 1973 - 1979 Opel Kadett C 1200 N & S
  • 1979 - 1984 Opel Kadett D 1000
  • 1979 - 1984 Opel Kadett D 1200 N & S
  • 1979 - 1984 Opel Kadett D 1300 N
  • 1984 - 1986 Opel Kadett E 1300 N

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Kadett

PMS137
Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Manta

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Manta

Rebuild Kit for Solex Pierburg 35 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 35 series carburetors as used on, amongst others, the:

  • 1972 - 1975 Opel Manta A 1200
  • 1970 - 1975 Opel Manta A 1600 N
  • 1975 - 1981 Opel Manta B 1200
  • 1979 - 1981 Opel Manta B 1300 N
  • 1975 - 1978 Opel Manta B 1600
  • 1976 - 1981 Opel Manta B 1900 N
  • 1981 Opel Manta 1300 N & S

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Manta

PMS137
Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Rekord

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Rekord

Rebuild Kit for Solex Pierburg 35 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 35 series carburetors as used on, amongst others, the:

  • 1972 - 1977 Opel Rekord D 1700 N & L
  • 1975 - 1977 Opel Rekord D 1900 N
  • 1977 - 1982 Opel Rekord E 1700 N & 1900 N

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Rekord

PMS137
Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Vauxhall Astra

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Vauxhall Astra

Rebuild Kit for Solex Pierburg 35 PDSI carburetors.

Rebuild kit for the Solex and Pierburg PDSI 35 series carburetors as used on, amongst others, the:

  • 1980 - 1984 Vauxhall Astra 1200

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Vauxhall Astra

FR6922
Rebuild Kit for Solex Pierburg 36/40 en 38 PDSI carburetors for BMW and Mercedes

Rebuild Kit for Solex Pierburg 36/40 en 38 PDSI carburetors for BMW and Mercedes

Service Kit for Solex Pierburg 36/40 en 38 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 36/40 and 38 series carburetors as, amongst others, used on the following cars:

  • BMW 1502
  • BMW 1602
  • BMW 1800
  • BMW 1802
  • BMW 2000
  • BMW 2002
  • BMW 518
  • Mercedes Benz 200
  • Mercedes Benz 230 (W110)
  • Mercedes Benz L 601 (208)
  • Mercedes Benz L 208
  • Mercedes Benz L 308
  • Mercedes Benz L 409

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • 3 Pump Diaphragms
  • Complete needle valve
  • 3 Float chamber gaskets
  • 2 Base gaskets
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex Pierburg 36/40 en 38 PDSI carburetors for BMW and Mercedes

PMS210
Rebuild Kit for Pierburg 36-40 PDSI carburetors for BMW 02-series

Rebuild Kit for Pierburg 36-40 PDSI carburetors for BMW 02-series

Service Kit for the Pierburg 36-40 PDSI carburetors as used on, amongst others, the following BMW 02-series models:

  • BMW 1502
  • BMW 1602
  • BMW 1802
  • BMW 2002

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve - size 200
  • Float chamber gasket
  • Choke gasket & O-Ring
  • Copper washer

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Pierburg 36-40 PDSI carburetors for BMW 02-series

PMS210
Rebuild Kit for Pierburg 36-40 PDSI carburetors for Mercedes-Benz W110

Rebuild Kit for Pierburg 36-40 PDSI carburetors for Mercedes-Benz W110

Service Kit for the Pierburg 36-40 PDSI carburetors as used on, amongst others, the following Mercedes W110 models:

  • Mercedes Benz 200 W110 - 1998 cc - 1965 - 1968
  • Mercedes Benz 230 W110 - 6 cylinder - 2303 cc - 1965 - 1967

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve - size 200
  • Float chamber gasket
  • Choke gasket & O-Ring
  • Copper washer

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Pierburg 36-40 PDSI carburetors for Mercedes-Benz W110

PMS210
Rebuild Kit for Pierburg 36-40 PDSI carburetors for Mercedes-Benz TN1 Transporter

Rebuild Kit for Pierburg 36-40 PDSI carburetors for Mercedes-Benz TN1 Transporter

Service Kit for the Pierburg 36-40 PDSI carburetors as used on, amongst others, the following Mercedes-Benz TN1 Transporters:

  • Mercedes Benz L 601 - 2307 cc - 1972 - 1982
  • Mercedes Benz L 208 - 2307 cc - 1972 - 1982
  • Mercedes Benz L 308 - 2307 cc - 1972 - 1982
  • Mercedes Benz L 409 - 2307 cc - 1972 - 1982

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve - size 200
  • Float chamber gasket
  • Choke gasket & O-Ring
  • Copper washer

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Pierburg 36-40 PDSI carburetors for Mercedes-Benz TN1 Transporter

PMS223
Rebuild Kit for Pierburg 32 PDSIT carburetors

Rebuild Kit for Pierburg 32 PDSIT carburetors

Newly arrived Rebuild Kit for Pierburg 32 PDSIT carburetors

Service Kit for Pierburg 32 PDSIT carburetors.

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Float chamber gasket
  • Complete needle valve assembly, size 120
  • Pump Diaphragm
  • Choke Diaphragm
  • Base gaskets
  • All other required gaskets
  • All required copper washers
  • Vito O-Ring

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Pierburg 32 PDSIT carburetors

FR0343
Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Audi 60

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Audi 60

Service Kit for Solex Pierburg 30/35 PDSI(T) carburetors as used on, amongst others, the 1968, 1969, 1970, 1971, 1972, 1973 and 1975 Audi 60 1500 & 1600.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Choke Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers
  • All other required gaskets

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor service kit.

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Audi 60

FR0343
Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Audi 80

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Audi 80

Service Kit for Solex Pierburg 30/35 PDSI(T) carburetors as used on, amongst others, the Audi 80 S & LS 1500, the 1974-series Audi 80 1300 & 1600 and 1980-series Audi 80 L, S & LS.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Choke Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers
  • All other required gaskets

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor service kit.

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Audi 80

FR0343
Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Opel Kadett

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Opel Kadett

Service Kit for Solex Pierburg 30/35 PDSI(T) carburetors as used on, amongst others, the:

  • 1968-series Opel Kadett B 1700 and Opel Kadett C 1700.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Choke Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers
  • All other required gaskets

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor service kit.

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Opel Kadett

FR0343
Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Opel Rekord

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Opel Rekord

Service Kit for Solex Pierburg 30/35 PDSI(T) carburetors as used on, amongst others, the:

  • 1968-series Opel Rekord C.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Choke Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers
  • All other required gaskets

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor service kit.

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Opel Rekord

FR0343
Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen Variant

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen Variant

Service Kit for Solex Pierburg 30/35 PDSI(T) carburetors as used on, amongst others, the 1973-series Volkswagen 1500 and 1600 Variant.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Choke Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers
  • All other required gaskets

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor service kit.

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen Variant

FR0343
Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen Passat

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen Passat

Service Kit for Solex Pierburg 30/35 PDSI(T) carburetors as used on, amongst others, the:

  • 1977-series Volkswagen Passat 1300
  • 1975-series Volkswagen Passat 1500
  • 1979-series Volkswagen Passat 1600

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Choke Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers
  • All other required gaskets

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor service kit.

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen Passat

FR0343
Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen Santana

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen Santana

Service Kit for Solex Pierburg 30/35 PDSI(T) carburetors as used on, amongst others, the 1979-series Volkswagen Santana 1600.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Choke Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers
  • All other required gaskets

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor service kit.

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen Santana

FR0343
Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen LT

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen LT

Service Kit for Solex Pierburg 30/35 PDSI(T) carburetors as used on, amongst others, the Volkswagen LT28 and LT31.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Choke Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers
  • All other required gaskets

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor service kit.

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen LT

PMS166
Service Kit for Pierburg 32-35 TDID carburetors for Audi 80

Service Kit for Pierburg 32-35 TDID carburetors for Audi 80

Service kit for the Solex 32-35 TDID carburetors as used on, amongst others, the Audi 80 GL 1500.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please verify that the parts in the picture will fit your carburetor as there were many varieties of this model which all differ in detail.
Please contact us in case of doubt.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Various carburetor-to-manifold gaskets
  • Various gaskets for the choke mechanism
  • Pump diaphragm
  • Needle Valve assembly; size 200
  • Various Aluminum Washers
  • Various Copper Washers
  • Various Viton O-Rings

This is a Carburetor City carburetor rebuild kit.

Service Kit for Pierburg 32-35 TDID carburetors for Audi 80

PMS166
Service Kit for Pierburg 32-35 TDID carburetors for Audi 100

Service Kit for Pierburg 32-35 TDID carburetors for Audi 100

Service kit for the Solex 32-35 TDID carburetors as used on, amongst others, the Audi 100 GL and GLS 1600.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please verify that the parts in the picture will fit your carburetor as there were many varieties of this model which all differ in detail.
Please contact us in case of doubt.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Various carburetor-to-manifold gaskets
  • Various gaskets for the choke mechanism
  • Pump diaphragm
  • Needle Valve assembly; size 200
  • Various Aluminum Washers
  • Various Copper Washers
  • Various Viton O-Rings

This is a Carburetor City carburetor rebuild kit.

Service Kit for Pierburg 32-35 TDID carburetors for Audi 100

PMS247
Service Kit for Pierburg 32 TDID carburetors for Ford Capri

Service Kit for Pierburg 32 TDID carburetors for Ford Capri

Service kit for the Pierburg 32 TDID carburetors as used on, amongst others, the 1968 - 1972 Ford Capri 1700, 2000, 2300 and 2600.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Power Valve Diaphragm
  • Various gaskets
  • Aluminum washer
  • Various fiber washers
  • Copper washer
  • Various rubber o-rings

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This service kit is suitable for the following Pierburg and Solex varieties of the 32 TDID:

  • Pierburg 32 TDID
  • Solex 32 TDID
  • Solex 32 TDID - EISA 2-3-4

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 32 TDID carburetors for Ford Capri

PMS247
Service Kit for Pierburg 32 TDID carburetors for Ford Taunus 1700 V4

Service Kit for Pierburg 32 TDID carburetors for Ford Taunus 1700 V4

Service kit for the Pierburg 32 TDID carburetors as used on, amongst others, the 1972 - 1975 Ford Taunus 1700 V4.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Power Valve Diaphragm
  • Various gaskets
  • Aluminum washer
  • Various fiber washers
  • Copper washer
  • Various rubber o-rings

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This service kit is suitable for the following Pierburg and Solex varieties of the 32 TDID:

  • Pierburg 32 TDID
  • Solex 32 TDID
  • Solex 32 TDID - EISA 2-3-4

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 32 TDID carburetors for Ford Taunus 1700 V4

flexoid5xa4
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.

Almost a "First Aid Kit" for the home mechanic!

This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.

You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.

The sheets are made of cellulose based, plasticised gelatin-impregnated material.

The sheets are of the following thickness:

  • 0.15MM
  • 0.25MM
  • 0.4MM
  • 0.8MM
  • 1.6MM

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

gatestextiel8mm
Gates textile covered fuel line hose with 8 mm inner diameter

Gates textile covered fuel line hose with 8 mm inner diameter

This is the top-of-the-line Gates flexible fuel line, resistant to modern day, aggressive, fuels.

Textile covered for the correct "vintage" look.

This fuel hose has an 8 mm inner diameter and 13 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

This small-diameter hose has a durable and oil resistant textile cover that provides a dependable and safe service on fuel circuits in passenger cars.

Recommended for clamped hose applications on fuel systems in passenger cars.

Key Features and Benefits:

• The tube resists heat, fuel (leaded and unleaded petrol, diesel) and oil
• The braided textile cover reinforces the hose and is resistant to heat, ozone and weathering
• Working pressure up to 0.6 MPa (6 kg/cm²)
• Temperature range from -35°C to +100°C

Maximum, single, length: 15 meters.

This hose uses 11 - 13 mm jubilee clips.

Gates textile covered fuel line hose with 8 mm inner diameter

jubilee11-13
11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp for 8 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 8 mm i.d. fuel line.

Neatly finished, the stainless steel makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 8 mm internal diameter (i.e. 11 - 13 mm external hose diameter).

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

OWV
Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec Fuel Line One Way Valve

jet sizer
Carburettor Jet Gauges

Carburettor Jet Gauges

Calibrated gauges to measure jet sizes.

The perfect way to determine the exact size of jets, regardless of what is indicated on them.

Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.

With these gauges, you can still determine which size these jets are.

Indispensable when working on modified carburettors!

Two different sets available:

Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mm
Set 2: 16 gauges, ranging from 1,50 to 3,00 mm

Priced per set!

Carburettor Jet Gauges

JSG01
Jet size gauge 0.5 to 1.5 mm

Jet size gauge 0.5 to 1.5 mm

Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.

Measurements are taken by inserting the tapered needle into the jet.

The size can then directly be read from the scale.

 

 

 

Jet size gauge 0.5 to 1.5 mm

JDK01
54-Piece Jet Drill Set

54-Piece Jet Drill Set

Jet drill set comprising 50 jet drills and and 4 pin vises.

The perfect way to fine-tune any jet to suit your needs.

Also highly suited to clean clogged-up jets.

The set contains:

  • 4 pin vises to suit all drill sizes included
  • 10 drills ranging from 1,0 to 2,0 mm:
    1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.7, 1.8, 1.9 & 2.0 mm
  • 20 drills ranging is size from 0.3 mm to 1.6 mm:
    0.3, 0.35, 0.4, 0.45, 0.50, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 & 1.6 mm
  • 20 x drills Gauge Number 80 to 61 (0.343 to 0.991 mm / 0.0135 to 0.0390 inches )

54-Piece Jet Drill Set

JET REAMER
16-Piece Jet Reamer Set

16-Piece Jet Reamer Set

Jet reamer kit comprising 16 reamers and and a pin vise.

The perfect way to fine-tune any jet to suit your needs.

The set contains:

  • 1 pin vise to suit all reamer sizes in this set
  • 1 storage case
  • 16 reamers ranging is size from 0.33 mm to 2.00 mm:
    0.33; 0.40; 0.45; 0.50; 0.60; 0.70; 0.75; 0.80; 0.90; 1.00; 1.10; 1.20; 1.40; 1.60; 1.80; 2.00 mm

16-Piece Jet Reamer Set

G4074
Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit.

The Tune-up plug for Petrol / LPG 2 and 4 stroke engines with single, twin or multiple carburettors or fuel injection systems.

The original and best tool for seeing what's happening inside the combustion chamber of the petrol engine.

It allows you to see the combustion and to adjust the mixture by color.

Fits most petrol engines in standard form with additional adapters available for vehicles with alternative sized spark plugs.

Additional Information

  • Kit includes: 14mm Short reach plug and Hexagonal adapter
  • Colortune will fit most vehicles
  • Kit complete with instructions in English
  • Extra adapter sizes available separately

Available in the following basic sizes:

  • 10 mm - Available from our Stock
  • 12 mm - Sold out at the moment !
  • 14 mm - Available from our Stock

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Colortune See Through Spark Plug Kit

Available as long as our limited stock lasts!

G4053
Gunson Carbalancer Carburetor Synchronizing Tool

Gunson Carbalancer Carburetor Synchronizing Tool

Gunson Car Balancer.

Internal combustion engines use a mixture of air and petrol to generate their power.

The performance therefore is influenced by the air flowing into it and the petrol that is metered out by the carburettor.

Unless the air flow in Twin or Multiple carburettors is correctly set, the correct mixture adjustment is unlikely to be achieved and this is the simplest tool to achieve that.

Suitable for use on SU, Solex, Auto-Lite (Fomoco), Stromberg, Weber and Zenith and can be adjusted to fit most carburettors including sidedraft, downdraft with air intakes (Venturi) from 25 mm to 67 mm (1”-2”) diameter

  • Easy read scale indicates the air flow and allows adjustment to optimum efficiency
  • Provides smoother and better acceleration
  • Carbalancer can be adjusted to fit most carburettors
  • Easy to follow instructions

The user manual for the Gunson Carbalancer, in English, can be downloaded HERE.

Available from our stock, ready to be shipped.

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Carbalancer Carburetor Synchronizing Tool