Dellorto PHBN and PHVA Carburetor Parts
Dellorto PHBN and PHVA Carburetor Parts

Dellorto PHBN and PHVA Parts

Dellorto PHBN and PHVA Carburetor Parts.

On this page you will find all currently available parts for the Dellorto PHBN and PHVA range carburetors.

Click HERE for an exploded view drawing of the Dellorto PHBN and PHVA.

The numbers in the drawing correspond to the numbers in brackets at the beginning of the article description.

We are still very much expanding our parts offerings for these carburetors so please contact us by email if the part that you are looking for is not yet listed.

Dellorto PHBN and PHVA Carburetor Parts

!
14730
(1) Throttle Slide for Dellorto PHBN and PHVA 17.5 carburetors

(1) Throttle Slide for Dellorto PHBN and PHVA 17.5 carburetors

Throttle Slide for Dellorto PHBN and PHVA 17.5 carburetors.

ONLY fits the 17.5 versions!

Please note that there are at least 2 versions of this slide and that the factory literature is unclear on which one is used in which carburetor.

The best way to distinguish between the two is to measure the height.

This particular version is some 25 mm tall at the tallest point.

Available in the following versions:

  • 30
  • 40

Required quantity per carburettor: 1

This is item number 1 in the drawing.

(1) Throttle Slide for Dellorto PHBN and PHVA 17.5 carburetors

15362.40
(1) Throttle Slide for Dellorto PHBN 14 MS carburetors

(1) Throttle Slide for Dellorto PHBN 14 MS carburetors

Throttle Slide for Dellorto PHBN 14 MS carburetors.

ONLY fits the 14 mm versions!

Please note that there are at least 2 versions of this slide and that the factory literature is unclear on which one is used in which carburetor.

The best way to distinguish between the two is to measure the height.

This particular version is some 31 mm tall at the tallest point.

Available in the following version: 40

Required quantity per carburettor: 1

This is item number 1 in the drawing.

(1) Throttle Slide for Dellorto PHBN 14 MS carburetors

6413
(4) Main jet for Dellorto PHBN and PHVA carburetors

(4) Main jet for Dellorto PHBN and PHVA carburetors

Main jet for the Dellorto PHBN and PHVA carburetors.

We only supply original Dellorto jets, marked with the famous diamond-shaped "Inc" logo.

In stock in sizes:

  • 52
  • 54
  • 56
  • 58
  • 60
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 105
  • 108
  • 110
  • 115
  • 118
  • 120
  • 125
  • 130
  • 135
  • 140
  • 145
  • 150
  • 155
  • 160
  • 165
  • 170
  • 172
  • 175
  • 180
  • 182
  • 185
  • 190
  • 195
  • 200
  • 205
  • 210

Please contact us by email if you require other size(s).

Required quantity per carburettor: 1

This is item number 4 in the drawing.

(4) Main jet for Dellorto PHBN and PHVA carburetors

11600
(5) Short Idle Jet for Dellorto PHBN and PHVA carburetors

(5) Short Idle Jet for Dellorto PHBN and PHVA carburetors

Short Idle Jet for the Dellorto PHBN and PHVA carburetors.

We only supply original Dellorto jets, marked with the famous diamond-shaped "Inc" logo.

Thread size: M4
Head diameter: 5mm
Thread length: 4mm
Total length: 7mm

In stock in sizes:

  • 40
  • 60

Please contact us by email if you require other size(s).

Required quantity per carburettor: 1

This is item number 5 in the drawing.

(5) Short Idle Jet for Dellorto PHBN and PHVA carburetors

53053
(7) Float and Needle Valve Set for Dellorto PHBN and PHVA carburetors

(7) Float and Needle Valve Set for Dellorto PHBN and PHVA carburetors

This is a complete float, needle valve and float pin set for the Dellorto PHBN and PHVA carburetors.

Required quantity per carburettor: 1

This is item number 7 in the drawing.

 

(7) Float and Needle Valve Set for Dellorto PHBN and PHVA carburetors

1476A
(10) Rubber Cable Boot for Dellorto PHBN and PHVA carburetors

(10) Rubber Cable Boot for Dellorto PHBN and PHVA carburetors

Rubber cable cap for the Dellorto PHBN and PHVA carburetors.

Required quantity per carburettor: 1 or 2 depending on set-up.

This is item number 10 in the drawing.

 

 

(10) Rubber Cable Boot for Dellorto PHBN and PHVA carburetors

1104
(11) Cable Adjuster for Dellorto PHBN en PHVA carburetors

(11) Cable Adjuster for Dellorto PHBN en PHVA carburetors

Throttle and choke cable adjuster for the Dellorto PHVA and PHBN series carburetors.

In some configurations, this cable adjuster uses lock nut Number 1691 to secure its setting.

For your convenience, you can order the lock nut right along with the adjuster by simply selecting it through the drop box above.

Required number per carburettor: depending on set-up, 2 (1 x for choke cable, 1 x for throttle cable)

This is item number 11 in the drawing.

(11) Cable Adjuster for Dellorto PHBN en PHVA carburetors

1691
(11) Locknut for Cable Adjuster on Dellorto PHBN and PHVA carburetors

(11) Locknut for Cable Adjuster on Dellorto PHBN and PHVA carburetors

Lock nut to secure the setting of cable adjuster number 11 on the Dellorto PHBN and PHVA carburetors.

Please note that cable adjuster 13 uses a different nut!

Required quantity per carburettor: 1

This nut is part of number 11 in the drawing.

 

(11) Locknut for Cable Adjuster on Dellorto PHBN and PHVA carburetors

1481
(13) Cable Adjuster for Dellorto PHBN and PHVA carburetors

(13) Cable Adjuster for Dellorto PHBN and PHVA carburetors

Cable adjuster for the Dellorto PHBN and PHVA carburetors.

Fits an outer cable with an external diameter of 6.75 mm.

This cable adjuster uses Lock Nut 1692 to secure its setting.

For your convenience, you can order this lock nut right along with this adjuster by simply selecting it through the drop box above.

Required quantity per carburettor: 1

This is part of item number 13 in the drawing.

(13) Cable Adjuster for Dellorto PHBN and PHVA carburetors

1692
(13) Lock nut for Cable Adjuster on Dellorto PHBN and PHVA carburetors

(13) Lock nut for Cable Adjuster on Dellorto PHBN and PHVA carburetors

This is the locknut that secures the setting on the throttle cable adjuster number 13 for the Dellorto PHBN and PHVA carburetors.

Please note that cable adjuster 11 uses a different nut!

Required quantity per carburettor: 1

This is part of item number 13 in the drawing.

 

(13) Lock nut for Cable Adjuster on Dellorto PHBN and PHVA carburetors

9330
(14) 40 Degree Cable Elbow for Dellorto PHBN and PHVA carburetors

(14) 40 Degree Cable Elbow for Dellorto PHBN and PHVA carburetors

40 degrees cable elbow for the Dellorto PHBN and PHVA carburetors.

Please note that this elbow is NOT suitable for the BMW R90S with metal topped carburettors!

This elbow is secured into the top cover by means of Lock Nut 1691. For your convenience, you can order this lock nut along with the elbow by simply selecting it through the drop box above.

Required quantity per carburettor: 1

This is item number 14 in the drawing.

(14) 40 Degree Cable Elbow for Dellorto PHBN and PHVA carburetors

10854
(14) 50 Degree Cable Elbow for Dellorto PHBN and PHVA carburetors

(14) 50 Degree Cable Elbow for Dellorto PHBN and PHVA carburetors

50 degrees cable elbow for the Dellorto PHBN and PHVA carburetors.

Please note that this elbow is NOT suitable for the BMW R90S with metal topped carburettors!

This elbow is secured into the top cover by means of Lock Nut 1691. For your convenience, you can order this lock nut along with the elbow by simply selecting it through the drop box above.

Required quantity per carburettor: 1

This is item number 14 in the drawing.

(14) 50 Degree Cable Elbow for Dellorto PHBN and PHVA carburetors

3600
(14) 70 Degree Cable Elbow for Dellorto PHBN and PHVA carburetors

(14) 70 Degree Cable Elbow for Dellorto PHBN and PHVA carburetors

70 degrees cable elbow for the Dellorto PHBN and PHVA carburetors.

Please note that this elbow is NOT suitable for the BMW R90S with metal topped carburettors!

This elbow is secured into the top cover by means of Lock Nut 1691. For your convenience, you can order this lock nut along with the elbow by simply selecting it through the drop box above.

Required quantity per carburettor: 1

This is item number 14 in the drawing.

(14) 70 Degree Cable Elbow for Dellorto PHBN and PHVA carburetors

3698
(14) 90 Degree Cable Elbow for Dellorto PHBN and PHVA carburetors

(14) 90 Degree Cable Elbow for Dellorto PHBN and PHVA carburetors

90 degrees cable elbow for the Dellorto PHBN and PHVA carburetors.

Please note that this elbow is NOT suitable for the BMW R90S with metal topped carburettors!

This elbow is secured into the top cover by means of Lock Nut 1691. For your convenience, you can order this lock nut along with the elbow by simply selecting it through the drop box above.

Required quantity per carburettor: 1

This is item number 14 in the drawing.

(14) 90 Degree Cable Elbow for Dellorto PHBN and PHVA carburetors

1691
Lock Nut for Cable Elbow on Dellorto carburetors

Lock Nut for Cable Elbow on Dellorto carburetors

This lock nut is used on a wide variety of Dellorto carburetors to secure the cable elbow into the top cover.

Required quantity per elbow: 1

This item is usually NOT depicted in the drawing.

 

 

 

Lock Nut for Cable Elbow on Dellorto carburetors

7526
(15) Screw for Dellorto PHBN and PHVA carburetors

(15) Screw for Dellorto PHBN and PHVA carburetors

Screw for the top cover of the Dellorto PHBN and PHVA carburetors.

Required quantity per carburettor: 2

This is item number 15 in the drawing.

 

 

(15) Screw for Dellorto PHBN and PHVA carburetors

53015
(33) Manual Choke Lever Kit for Dellorto PHVA carburetors

(33) Manual Choke Lever Kit for Dellorto PHVA carburetors

Manual choke lever kit for the Dellorto PHVA carburetors.

Comes as a complete kit as depicted in the photos.

Required quantity per carburettor: 1

This is item number 33 in the drawing.

 

(33) Manual Choke Lever Kit for Dellorto PHVA carburetors

1411
(35) Spring for Air Mixture Screw on Dellorto PHBN and PHVA carburetors

(35) Spring for Air Mixture Screw on Dellorto PHBN and PHVA carburetors

Spring to secure the setting of the various versions of the air mixture screw on the Dellorto PHBN and PHVA carburetors.

Required quantity per carburettor: 1

This is item number 35 in the drawing.

This is a genuine Dellorto part.

 

 

(35) Spring for Air Mixture Screw on Dellorto PHBN and PHVA carburetors

4670
(38) Mixture screw spring for Dellorto PHBN and PHVA carburetors

(38) Mixture screw spring for Dellorto PHBN and PHVA carburetors

Mixture screw spring for Dellorto PHBN and PHVA carburetors.

Required quantity per carburettor: 1

This is item number 38 in the drawing.

 

 

(38) Mixture screw spring for Dellorto PHBN and PHVA carburetors

52620
(52) Service Kit for Dellorto PHBN carburetors

(52) Service Kit for Dellorto PHBN carburetors

Official Dellorto factory service kit for the Dellorto PHBN carburetors.

Contains all the gaskets, seals etc to freshen up 1 carburetor.

Required quantity per carburettor: 1

This is item number 52 in the drawing.

 

(52) Service Kit for Dellorto PHBN carburetors

52622
(52) Service Kit for Dellorto PHVA B C D E H I L G M P Q R S T Z carburetors

(52) Service Kit for Dellorto PHVA B C D E H I L G M P Q R S T Z carburetors

Official Dellorto factory service kit for the Dellorto PHVA carburetors.

Contains all the gaskets, seals etc to freshen up 1 carburetor.

It is suitable for the following versions of the Dellorto PHVA:

  • Dellorto PHVA B
  • Dellorto PHVA C
  • Dellorto PHVA D
  • Dellorto PHVA E
  • Dellorto PHVA H
  • Dellorto PHVA I
  • Dellorto PHVA L
  • Dellorto PHVA G
  • Dellorto PHVA M
  • Dellorto PHVA P
  • Dellorto PHVA Q
  • Dellorto PHVA R
  • Dellorto PHVA S
  • Dellorto PHVA T
  • Dellorto PHVA Z

For the other versions of the Dellorto PHVA, please use service kit number 52625.

Required quantity per carburettor: 1

This is item number 52 in the drawing.

(52) Service Kit for Dellorto PHVA B C D E H I L G M P Q R S T Z carburetors

52625
(52) Service Kit for Dellorto PHVA FS US ID QD QS RD SD carburetors

(52) Service Kit for Dellorto PHVA FS US ID QD QS RD SD carburetors

Official Dellorto factory service kit for the Dellorto PHVA carburetors.

Contains all the gaskets, seals etc to freshen up 1 carburetor.

It is suitable for the following versions of the Dellorto PHVA:

  • Dellorto PHVA FS
  • Dellorto PHVA US
  • Dellorto PHVA ID
  • Dellorto PHVA QD
  • Dellorto PHVA QS
  • Dellorto PHVA RD
  • Dellorto PHVA SD

These are the versions with the starter / choke jet incorporated into the float bowl.

For the other versions of the Dellorto PHVA, please use service kit number 52622.

Required quantity per carburettor: 1

This is item number 52 in the drawing.

(52) Service Kit for Dellorto PHVA FS US ID QD QS RD SD carburetors

14574
(56) Choke Piston for Dellorto PHBN carburetors

(56) Choke Piston for Dellorto PHBN carburetors

Choke piston for the hand-operated choke mechanism on the Dellorto PHBN carburetors.

Suitable for a choke cylinder bore of 7 mm.

Required quantity per carburettor: 1

This is item number 56 in the drawing.

 

 

 

(56) Choke Piston for Dellorto PHBN carburetors

flexoid5xa4
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.

Almost a "First Aid Kit" for the home mechanic!

This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.

You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.

The sheets are made of cellulose based, plasticised gelatin-impregnated material.

The sheets are of the following thickness:

  • 0.15MM
  • 0.25MM
  • 0.4MM
  • 0.8MM
  • 1.6MM

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

OWV
Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec Fuel Line One Way Valve

PRO805
Sytec Pro-Line in-line fuel filter - 8 mm

Sytec Pro-Line in-line fuel filter - 8 mm

In line fuel filter with cleanable / replaceable filter.

Suitable for 8 mm internal diameter fuel hoses.

Replacement filter elements are available HERE.

Chrome finish.

Toughened glass phial.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

Supplied with 2 Jubilee clips.

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

Sytec Pro-Line in-line fuel filter - 8 mm

PRO896
Replacement elements for Sytec in-line fuel filter

Replacement elements for Sytec in-line fuel filter

3 replacement elements for the Sytec Pro-Line in-line fuel filter.

Come complete with new rubber seals.

These elements fit our PRO804 and PRO805 Sytec in-line fuel filters.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

 

 

 

 

Replacement elements for Sytec in-line fuel filter

jet sizer
Carburettor Jet Gauges

Carburettor Jet Gauges

Calibrated gauges to measure jet sizes.

The perfect way to determine the exact size of jets, regardless of what is indicated on them.

Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.

With these gauges, you can still determine which size these jets are.

Indispensable when working on modified carburettors!

Two different sets available:

Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mm
Set 2: 16 gauges, ranging from 1,50 to 3,00 mm

Priced per set!

Carburettor Jet Gauges

JSG01
Jet size gauge 0.5 to 1.5 mm

Jet size gauge 0.5 to 1.5 mm

Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.

Measurements are taken by inserting the tapered needle into the jet.

The size can then directly be read from the scale.

 

 

 

Jet size gauge 0.5 to 1.5 mm

JDK01
54-Piece Jet Drill Set

54-Piece Jet Drill Set

Jet drill set comprising 50 jet drills and and 4 pin vises.

The perfect way to fine-tune any jet to suit your needs.

Also highly suited to clean clogged-up jets.

The set contains:

  • 4 pin vises to suit all drill sizes included
  • 10 drills ranging from 1,0 to 2,0 mm:
    1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.7, 1.8, 1.9 & 2.0 mm
  • 20 drills ranging is size from 0.3 mm to 1.6 mm:
    0.3, 0.35, 0.4, 0.45, 0.50, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 & 1.6 mm
  • 20 x drills Gauge Number 80 to 61 (0.343 to 0.991 mm / 0.0135 to 0.0390 inches )

54-Piece Jet Drill Set

JET REAMER
16-Piece Jet Reamer Set

16-Piece Jet Reamer Set

Jet reamer kit comprising 16 reamers and and a pin vise.

The perfect way to fine-tune any jet to suit your needs.

The set contains:

  • 1 pin vise to suit all reamer sizes in this set
  • 1 storage case
  • 16 reamers ranging is size from 0.33 mm to 2.00 mm:
    0.33; 0.40; 0.45; 0.50; 0.60; 0.70; 0.75; 0.80; 0.90; 1.00; 1.10; 1.20; 1.40; 1.60; 1.80; 2.00 mm

16-Piece Jet Reamer Set

G4074
Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit.

The Tune-up plug for Petrol / LPG 2 and 4 stroke engines with single, twin or multiple carburettors or fuel injection systems.

The original and best tool for seeing what's happening inside the combustion chamber of the petrol engine.

It allows you to see the combustion and to adjust the mixture by color.

Fits most petrol engines in standard form with additional adapters available for vehicles with alternative sized spark plugs.

Additional Information

  • Kit includes: 14mm Short reach plug and Hexagonal adapter
  • Colortune will fit most vehicles
  • Kit complete with instructions in English
  • Extra adapter sizes available separately

Available in the following basic sizes:

  • 10 mm - Available from our Stock
  • 12 mm - Sold out at the moment !
  • 14 mm - Available from our Stock

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Colortune See Through Spark Plug Kit

Available as long as our limited stock lasts!

DD0906
Dellorto Carburatori Sticker - Large

Dellorto Carburatori Sticker - Large

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 9 x 3 cm (3.54 x 1.2 inches).

This is Number 1 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Large

DD0909
Dellorto Carburatori Sticker - Medium

Dellorto Carburatori Sticker - Medium

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 8 x 4 cm (3.1 x 1.55 inches).

This is Number 2 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Medium

DD0904
Dellorto Carburatori Sticker - Small - High

Dellorto Carburatori Sticker - Small - High

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 6 x 3 cm (2.4 x 1.2 inches).

This is Number 3 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Small - High

DD0905
Dellorto Carburatori Sticker - Small - Low

Dellorto Carburatori Sticker - Small - Low

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 6 x 2 cm (2.4 x 0.8 inches).

This is Number 4 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Small - Low

Patch
Dellorto Carburatori Sew-On Patch

Dellorto Carburatori Sew-On Patch

Official issue sew-on patch with the Dellorto logo and Italian flag "tricolore" colors.

Measures 12 x 6.5 cm (4.7 x 2.6 inches).

Elaborately embroidered.

 

 

Dellorto Carburatori Sew-On Patch