Cohline Flexible Fuel Lines
Cohline Flexible Fuel Lines

Cohline Fuel Lines

Cohline Flexible Fuel Lines.

The Cohline fuel lines that are listed here are all E10-fuel resistant and consequently can be used both in classic cars as well as modern vehicles.

Cohline Flexible Fuel Lines

!
vachose
Cohline Vacuum Hose with 3.5 mm inner diameter

Cohline Vacuum Hose with 3.5 mm inner diameter

This is the top-of-the-line Cohline silicone vacuum hose / line.

Exceptionally well suited for use on the vacuum-advance of distributors.

Also suited as replacement or extension for your Manometer.

This line has a 3.5 mm inner diameter and circa 8 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 5 meters.

Cohline Vacuum Hose with 3.5 mm inner diameter

2134.0400
Cohline E10-resistant fuel line hose with 6 mm inner diameter

Cohline E10-resistant fuel line hose with 6 mm inner diameter

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose.

This fuel hose has an 6 mm inner diameter and 12 mm outer diameter and is therewith a nice, tight, fit onto 6 mm fuel unions.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 50 mm

This hose uses 10 - 12 mm jubilee clips.

Cohline E10-resistant fuel line hose with 6 mm inner diameter

2134.01.0400
Cohline E10-resistant fuel line hose with 6 mm inner diameter and steel braiding

Cohline E10-resistant fuel line hose with 6 mm inner diameter and steel braiding

This is the top-of-the-line Cohline, steel-braided E10-resistant, flexible fuel line / hose.

This fuel hose has an 6 mm inner diameter and 13.5 mm outer diameter and is therewith suitable for 6 mm fuel unions.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 50 mm

This hose uses 12 - 14 mm jubilee clips.

Cohline E10-resistant fuel line hose with 6 mm inner diameter and steel braiding

Please note:
This article is currently on order from the manufacturer.
We expect the new supply to arrive at our warehouse by mid October, 2017.
If you don't want to miss out on it, feel free to place your order now.
Payment is not required until we have your shipment ready to go.

2134.0600
Cohline E10-resistant fuel line hose with 8 mm inner diameter

Cohline E10-resistant fuel line hose with 8 mm inner diameter

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose.

This fuel hose has an actual inner diameter of 7.5 mm and 13.5 mm outer diameter and therewith a nice and tight fit for 8 mm fuel unions.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

This hose uses 11 - 13 mm jubilee clips.

Cohline E10-resistant fuel line hose with 8 mm inner diameter

2134.01.0600
Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

This is the top-of-the-line Cohline, steel-braided E10-resistant, flexible fuel line / hose.

This fuel hose has an 8 mm inner diameter and 16 mm outer diameter and is therewith suitable for 8 mm fuel unions.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

 This hose uses 14 - 16 mm jubilee clips.

Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

Please note:
This article is currently on order from the manufacturer.
We expect the new supply to arrive at our warehouse by the mid October, 2017.
If you don't want to miss out on it, feel free to place your order now.
Payment is not required until we have your shipment ready to go.

2134.0800
Cohline E10-resistant fuel line hose with 10 mm inner diameter

Cohline E10-resistant fuel line hose with 10 mm inner diameter

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose.

This fuel hose has an 9.5 mm inner diameter and 15.5 mm outer diameter, suitable for fuel unions of 10 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

This hose uses 14 - 16 mm jubilee clips.

Cohline E10-resistant fuel line hose with 10 mm inner diameter

2134.01.0800
Cohline E10-resistant fuel line hose with 10 mm inner diameter and steel braiding

Cohline E10-resistant fuel line hose with 10 mm inner diameter and steel braiding

This is the top-of-the-line Cohline, steel-braided E10-resistant, flexible fuel line / hose.

This fuel hose has an 9.5 mm inner diameter and 17.5 mm outer diameter, suitable for fuel unions of 10 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 80 mm

Cohline E10-resistant fuel line hose with 10 mm inner diameter and steel braiding

2134.1000
Cohline E10-resistant fuel line hose with 12 mm inner diameter

Cohline E10-resistant fuel line hose with 12 mm inner diameter

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose.

This fuel hose has an 12 mm inner diameter and 19 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 80 mm

This fuel line uses jubilee clip jubilee15-27.

Cohline E10-resistant fuel line hose with 12 mm inner diameter

2134.01.1000
Cohline E10-resistant fuel line hose with 12 mm inner diameter and steel braiding

Cohline E10-resistant fuel line hose with 12 mm inner diameter and steel braiding

This is the top-of-the-line Cohline, steel-braided E10-resistant, flexible fuel line / hose.

This fuel hose has an 12 mm inner diameter and 20.5 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 80 mm

This fuel line uses jubilee clip jubilee15-27.

Cohline E10-resistant fuel line hose with 12 mm inner diameter and steel braiding

norm5mm
Endless Band Hose Clamp with Buckle - 5 mm wide

Endless Band Hose Clamp with Buckle - 5 mm wide

Endless Band Hose Clamp with Buckle - 5 mm wide.

Again one of those items that allows you to put the finishing touches on a restoration!

This is the famous "endless band hose clamp with buckle" that was used throughout the 1950's, 1960's and 1970's in the car industry.

Unfortunately, these band clamps are only suitable for one-time use and are discarded after removing them.

Over the years, these clamps have become harder and harder to find but we managed to find a source!

We are selling these in sets.

Such a set consist of the following:

  • Approximately 100 cm Zinc-plated band, 5 millimeters wide
  • 3 buckles

This way, you have roughly a foot (or 33 cm) of band per clamp / buckle which is more than enough for regular applications.

Thanks to the generous length of band, there is virtually no limit to the diameter or circumference of the clamp that you wish to apply although these were usually applied to small diameter fuel lines.

Please note that this style of clamping is NOT suitable for steel-braided lines.

Endless Band Hose Clamp with Buckle - 5 mm wide

jubilee7-9
7 - 9 mm Stainless Steel Jubilee Clip Hose Clamp

7 - 9 mm Stainless Steel Jubilee Clip Hose Clamp

7 - 9 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 7 and 9 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

7 - 9 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee8-10
8 - 10 mm Stainless Steel Jubilee Clip Hose Clamp

8 - 10 mm Stainless Steel Jubilee Clip Hose Clamp

8 - 10 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 8 and 10 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

8 - 10 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee9-11
9 - 11 mm Stainless Steel Jubilee Clip Hose Clamp

9 - 11 mm Stainless Steel Jubilee Clip Hose Clamp

9 - 11 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 9 and 11 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

9 - 11 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee10-12
10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp for 6 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 6 mm internal diameter fuel line as well as our green "Italian Style" transparent fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 10 and 12 mm internal diameter (i.e. 10 - 12 mm external hose/line diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee11-13
11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp for 8 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 8 mm internal diameter fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 8 mm internal diameter (i.e. 11 - 13 mm external hose diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee12-14
12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp

12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp

12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 12 and 14 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee14-16
14 - 16 mm Stainless Steel Jubilee Clip Hose Clamp

14 - 16 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp 14 - 16 mm for 10 mm Flexible Fuel Line.

Neatly finished, this stainless steel (Grade 304) hose clamp (or jubilee clip if you want) is the perfect compliment to your fuel hose.

It is rated for between 14 and 16 mm external hose diameter with 10 mm internal diameter.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

14 - 16 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee15-17
15 - 17 mm Stainless Steel Jubilee Clip Hose Clamp

15 - 17 mm Stainless Steel Jubilee Clip Hose Clamp

15 - 17 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 15 - 17 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

15 - 17 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee16-18
16 - 18 mm Stainless Steel Jubilee Clip Hose Clamp

16 - 18 mm Stainless Steel Jubilee Clip Hose Clamp

16 - 18 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 16 and 18 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

16 - 18 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee15-27
15 - 27 mm Zinc-Plated Jubilee Clip Hose Clamp

15 - 27 mm Zinc-Plated Jubilee Clip Hose Clamp

Zinc Plated Jubilee Clip Hose Clamp 15 - 27 mm for 12 mm internal diameter Flexible Fuel Line.

Neatly finished, this zinc-plated hose clamp (or jubilee clip if you want) is the perfect compliment to your fuel hose.

It is rated for between 15 and 27 mm external hose diameter with 12 mm internal diameter.

Can be tightened using a 6 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

15 - 27 mm Zinc-Plated Jubilee Clip Hose Clamp

FLEXIDRIVER
Gates Flexi Driver tool to tighten Jubilee Clips

Gates Flexi Driver tool to tighten Jubilee Clips

Special flexible tool to correctly tighten jubilee clips.

This Gate Flexidriver is a highly effective, torque sensitive screwdriver, calibrated to bend when the proper torque is attained.

Apart from that, it's a handy tool with flexible shaft to tighten the clamps properly, also on hard-to-reach places.

Comes complete with a set of 4 (four!) sockets in the following sizes:

  • 6 mm
  • 7 mm
  • 8 mm
  • 10 mm

Gates Flexi Driver tool to tighten Jubilee Clips