Dellorto PHBD Carburetor Parts
Dellorto PHBD Carburetor Parts

Dellorto PHBD Parts

Dellorto PHBD Carburetor Parts.

On this page you will find all currently available parts for the Dellorto PHBD range carburetors.

Click HERE for an exploded view drawing of the Dellorto PHBD.

The numbers in the drawing correspond to the numbers in brackets at the beginning of the article description.

Click HERE for instructions on how to set the float level of the Dellorto PHBD.

We are still very much expanding our parts offerings for these carburettors so please contact us by email if the part that you are looking for is not yet listed.

Dellorto PHBD Carburetor Parts

!
1486
(5) Main Jet for Dellorto PHBD carburetors

(5) Main Jet for Dellorto PHBD carburetors

Factory original main jet for the Dellorto PHBD carburetors.

We only supply original Dellorto jets, marked with the famous diamond-shaped "Inc" logo.

Available from our stock in sizes:

  • 33
  • 35
  • 40
  • 45
  • 48
  • 50
  • 53
  • 55
  • 58
  • 60
  • 62
  • 65
  • 67
  • 72
  • 80
  • 82
  • 84
  • 86
  • 88
  • 90
  • 118
  • 120

Most other sizes are available on special order. Please contact us by email with your exact requirements.

Required quantity per carburettor: 1

This is item number 5 in the drawing.

(5) Main Jet for Dellorto PHBD carburetors

1488
(6) Idle Jet for Dellorto PHBD carburetors

(6) Idle Jet for Dellorto PHBD carburetors

Factory original idle jet for the Dellorto PHBD carburetors.

We only supply original Dellorto jets, marked with the famous diamond-shaped "Inc" logo.

Thread size: M5 x 0.8 mm.

Available from our stock in sizes:

  • 58
  • 60

Most other sizes are available on special order. Please contact us by email with your exact requirements.

Required quantity per carburettor: 1

This is item number 6 in the drawing.

(6) Idle Jet for Dellorto PHBD carburetors

9450
(8) Float Assembly for Dellorto PHBD carburetors

(8) Float Assembly for Dellorto PHBD carburetors

Factory original float assembly for the Dellorto PHBD series carburetors.

Currently available in the following weight versions:

  • 9450.1 - 4 grams
  • 9450.2 - 5 grams

We strongly advice against experimenting with float weights.
So if your original float is damaged, only replace it with one of the same weight.

Click HERE for instructions on how to set the float level of the Dellorto PHBD.

Required quantity per carburettor: 1

This is item number 8 in the drawing.

(8) Float Assembly for Dellorto PHBD carburetors

1476A
(9) Rubber Cable Boot for Dellorto PHBD carburetors

(9) Rubber Cable Boot for Dellorto PHBD carburetors

Rubber cable cap for the Dellorto PHBD series carburetors.

Required quantity per carburettor: 1

This is item number 9 in the drawing.

 

 

 

 

(9) Rubber Cable Boot for Dellorto PHBD carburetors

1104
(10) Throttle Cable Adjuster for Dellorto PHBD carburetors

(10) Throttle Cable Adjuster for Dellorto PHBD carburetors

Throttle cable adjuster for the Dellorto PHBD series carburetors.

Required number per carburettor: 1

This is item number 10 in the drawing.

 

 

 

(10) Throttle Cable Adjuster for Dellorto PHBD carburetors

9596
(19) Needle Circlip for Dellorto PHBD carburetors

(19) Needle Circlip for Dellorto PHBD carburetors

Circlip to secure the needle on the Dellorto PHBD series carburettors.

Required quantity per carburettor: 1

This is item number 19 in the drawing.

 

 

(19) Needle Circlip for Dellorto PHBD carburetors

4670
(33) Mixture screw spring for Dellorto PHBD carburetors

(33) Mixture screw spring for Dellorto PHBD carburetors

Mixture screw spring for Dellorto PHBD carburetors.

Required quantity per carburettor: 1

This is item number 33 in the drawing.

 

 

(33) Mixture screw spring for Dellorto PHBD carburetors

9336
(35) Mixture screw spring for Dellorto PHBD carburetors

(35) Mixture screw spring for Dellorto PHBD carburetors

Mixture screw spring for suitable for the Dellorto PHBD series carburetors.

Required quantity per carburettor: 1

This is item number 35 in the drawing.

 

 

(35) Mixture screw spring for Dellorto PHBD carburetors

8260
(36) Mixture screw spring washer for Dellorto PHBD carburetors

(36) Mixture screw spring washer for Dellorto PHBD carburetors

Washer that keeps the mixture screw spring in place on the Dellorto PHBD series carburetors.

Required quantity per carburettor: 1

This is item number 36 in the drawing.

 

(36) Mixture screw spring washer for Dellorto PHBD carburetors

8678
(37) O-Ring for mixture screw on Dellorto PHBD carburetors

(37) O-Ring for mixture screw on Dellorto PHBD carburetors

Viton (rubber) O-Ring for mixture screw on Dellorto PHBD series carburetors.

Required number per carburettor: 1

This is item number 37 in the drawing.

 

 

(37) O-Ring for mixture screw on Dellorto PHBD carburetors

9497
(40) Float Bowl Gasket for Dellorto PHBD carburetors

(40) Float Bowl Gasket for Dellorto PHBD carburetors

Float bowl gasket for the Dellorto PHBD series carburetors.

Fits both varieties of float bowl (numbers 41 and 45 in the drawing).

Required number per carburettor: 1

This is item number 40 in the drawing.

 

 

(40) Float Bowl Gasket for Dellorto PHBD carburetors

flexoid5xa4
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.

Almost a "First Aid Kit" for the home mechanic!

This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.

You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.

The sheets are made of cellulose based, plasticised gelatin-impregnated material.

The sheets are of the following thickness:

  • 0.15MM
  • 0.25MM
  • 0.4MM
  • 0.8MM
  • 1.6MM

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

OWV
Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec Fuel Line One Way Valve

PRO805
Sytec Pro-Line in-line fuel filter - 8 mm

Sytec Pro-Line in-line fuel filter - 8 mm

In line fuel filter with cleanable / replaceable filter.

Suitable for 8 mm internal diameter fuel hoses.

Replacement filter elements are available HERE.

Chrome finish.

Toughened glass phial.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

Supplied with 2 Jubilee clips.

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

Sytec Pro-Line in-line fuel filter - 8 mm

PRO896
Replacement elements for Sytec in-line fuel filter

Replacement elements for Sytec in-line fuel filter

3 replacement elements for the Sytec Pro-Line in-line fuel filter.

Come complete with new rubber seals.

These elements fit our PRO804 and PRO805 Sytec in-line fuel filters.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

 

 

 

 

Replacement elements for Sytec in-line fuel filter

jet sizer
Carburettor Jet Gauges

Carburettor Jet Gauges

Calibrated gauges to measure jet sizes.

The perfect way to determine the exact size of jets, regardless of what is indicated on them.

Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.

With these gauges, you can still determine which size these jets are.

Indispensable when working on modified carburettors!

Two different sets available:

Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mm
Set 2: 16 gauges, ranging from 1,50 to 3,00 mm

Priced per set!

Carburettor Jet Gauges

JSG01
Jet size gauge 0.5 to 1.5 mm

Jet size gauge 0.5 to 1.5 mm

Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.

Measurements are taken by inserting the tapered needle into the jet.

The size can then directly be read from the scale.

 

 

 

Jet size gauge 0.5 to 1.5 mm

JDK01
54-Piece Jet Drill Set

54-Piece Jet Drill Set

Jet drill set comprising 50 jet drills and and 4 pin vises.

The perfect way to fine-tune any jet to suit your needs.

Also highly suited to clean clogged-up jets.

The set contains:

  • 4 pin vises to suit all drill sizes included
  • 10 drills ranging from 1,0 to 2,0 mm:
    1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.7, 1.8, 1.9 & 2.0 mm
  • 20 drills ranging is size from 0.3 mm to 1.6 mm:
    0.3, 0.35, 0.4, 0.45, 0.50, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 & 1.6 mm
  • 20 x drills Gauge Number 80 to 61 (0.343 to 0.991 mm / 0.0135 to 0.0390 inches )

54-Piece Jet Drill Set

JET REAMER
16-Piece Jet Reamer Set

16-Piece Jet Reamer Set

Jet reamer kit comprising 16 reamers and and a pin vise.

The perfect way to fine-tune any jet to suit your needs.

The set contains:

  • 1 pin vise to suit all reamer sizes in this set
  • 1 storage case
  • 16 reamers ranging is size from 0.33 mm to 2.00 mm:
    0.33; 0.40; 0.45; 0.50; 0.60; 0.70; 0.75; 0.80; 0.90; 1.00; 1.10; 1.20; 1.40; 1.60; 1.80; 2.00 mm

16-Piece Jet Reamer Set

G4074
Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit.

The Tune-up plug for Petrol or LPG, 2 and 4 stroke engines with single, twin or multiple carburettors or fuel injection systems.

The original and best tool for seeing what's happening inside the combustion chamber of the petrol engine.

It allows you to see the combustion and to adjust the mixture by color.

Fits most petrol engines in standard form with additional adapters available for vehicles with alternative sized spark plugs.

Kit includes:

  • See-Through Spark Plug
  • Hexagonal adapter for spark plug wrench
  • Copper sealing washer
  • Extension Cord
  • Extension tube with mirror
  • Cleaning brush
  • Instructions in English

Colortune will fit most vehicles.

Extra adapter sizes available separately

Available in the following basic thread sizes:

  • 10 mm
  • 12 mm
  • 14 mm

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Colortune See Through Spark Plug Kit

Available from our Stock

DD0906
Dellorto Carburatori Sticker - Large

Dellorto Carburatori Sticker - Large

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 9 x 3 cm (3.54 x 1.2 inches).

This is Number 1 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Large

DD0909
Dellorto Carburatori Sticker - Medium

Dellorto Carburatori Sticker - Medium

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 8 x 4 cm (3.1 x 1.55 inches).

This is Number 2 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Medium

DD0905
Dellorto Carburatori Sticker - Small - Low

Dellorto Carburatori Sticker - Small - Low

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 6 x 2 cm (2.4 x 0.8 inches).

This is Number 3 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Small - Low

Patch
Dellorto Carburatori Sew-On Patch

Dellorto Carburatori Sew-On Patch

Official issue sew-on patch with the Dellorto logo and Italian flag "tricolore" colors.

Measures 12 x 6.5 cm (4.7 x 2.6 inches).

Elaborately embroidered.

 

 

Dellorto Carburatori Sew-On Patch