Carburetor City carburetor service kits
Carburetor City carburetor service kits

Carburetor City carburetor rebuild kits

Carburetor City® carburetor rebuild kits.

On this page you will find the current range of Carburetor City carburetor service kits.

Carburetor City specializes in premium quality, complete, service kits serving a broad range carburetor makes and models.

We basically carry the whole Carburetor City range but are still in the process of adding them to our web-shop.

If the kit that you are looking for is not yet listed here, please don't hesitate to contact us.

Carburetor City carburetor rebuild kits

!
9213370500
Service kit for Weber 32 DARA Carburetors for Renault 21

Service kit for Weber 32 DARA Carburetors for Renault 21

Service kit for the Weber 32DARA series carburetors as used by Renault on the 1995 cc Renault 21 TS.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Fuel filter
  • Pump diaphragm
  • Float Hinge Pin
  • All required gaskets
  • All required rubber (Viton) o-rings
  • All required fiber rings
  • All required copper and aluminum washers

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburetor rebuild kit.

Service kit for Weber 32 DARA Carburetors for Renault 21

9213370500
Weber 32 DARA Carburetor Service Kit for Renault 18

Weber 32 DARA Carburetor Service Kit for Renault 18

Service kit for the Weber 32DARA series carburetors as used by Renault on the 1647cc Renault 18 and 1995cc Renault 18 TX and Renault 18 GTX.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Fuel filter
  • Pump diaphragm
  • Float Hinge Pin
  • All required gaskets
  • All required rubber (Viton) o-rings
  • All required fiber rings
  • All required copper and aluminum washers

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburetor rebuild kit.

Weber 32 DARA Carburetor Service Kit for Renault 18

DCOFSERVICEKIT
Rebuild Kit for Weber DCOF carburetors for Fiat 1100

Rebuild Kit for Weber DCOF carburetors for Fiat 1100

Comprehensive service kit for Weber DCOF carburetors as used on, amongst others, the Fiat 1100D.

Contains all necessary parts to freshen-up 1 DCOF carburettor.

Consists, amongst others, of:

  • Needle valve, size 150
  • Pump diaphragm
  • Fuel filters
  • all necessary gaskets
  • Viton (rubber) o-ring
  • Fiber ring
  • Aluminum ring

This is a Carburetor City carburetor service kit.

Rebuild Kit for Weber DCOF carburetors for Fiat 1100

DCOFSERVICEKIT
Rebuild Kit for Weber DCOF carburetors for Fiat 124

Rebuild Kit for Weber DCOF carburetors for Fiat 124

Comprehensive service kit for Weber DCOF carburetors as used on, amongst others, the Fiat 124.

Contains all necessary parts to freshen-up 1 DCOF carburettor.

Consists, amongst others, of:

  • Needle valve, size 150
  • Pump diaphragm
  • Fuel filters
  • all necessary gaskets
  • Viton (rubber) o-ring
  • Fiber ring
  • Aluminum ring

This is a Carburetor City carburetor service kit.

Rebuild Kit for Weber DCOF carburetors for Fiat 124

DRT/C
Service kit for Weber DRT and DRTC carburetors

Service kit for Weber DRT and DRTC carburetors

Comprehensive service kit for the Weber DRT and DRTC carburetors.

Contains all required parts to service 1 carburetor.

Consists, amongst others, of the following parts:

  • Pump diaphragm
  • Anti-stall diaphragm
  • 175 size Needle valve
  • Fuel inlet filter
  • Throttle shaft seals
  • Throttle shaft tabs
  • Float pivot pin
  • Screws
  • All required o-rings
  • All required aluminum rings

This is a Carburetor City carburetor rebuild kit.

Service kit for Weber DRT and DRTC carburettors

DRT/M
Service kit for Weber DRT and DRTM 32 carburetors

Service kit for Weber DRT and DRTM 32 carburetors

Very comprehensive service kit for the Weber DRT and DRT/M 32 carburetors.

Contains all required parts to service 1 carburetor.

Consists, amongst others, of the following parts:

  • Pump diaphragm
  • Anti-stall diaphragm
  • 200 size Needle valve
  • Fuel inlet filters
  • Throttle shaft seals
  • Throttle shaft tabs
  • Float pivot pin
  • All required o-rings
  • All required aluminum rings

This is a Carburetor City carburetor rebuild kit.

Service kit for Weber DRT and DRTM 32 carburetors

FR0282
Service Kit for 2 Solex 40 ADDHE 29/31 carburetors for Alfa Romeo Giulietta 116

Service Kit for 2 x Solex 40 ADDHE 29/31 carburetors for Alfa Romeo Giulietta 116

Service kit for the Solex 40ADDHE 29 and 31 carburetor as used on, amongst others, the Alfa Romeo Giulietta 116 1600, 1800 & 2000.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 2 carburettors.

Consists of the following parts:

  • All required gaskets
  • 2 Pump Diaphragms
  • 2 Needle Valves
  • 4 Inlet Plenum Gaskets
  • All required rubber o-rings and aluminum washers

This is a Carburetor City carburetor service kit.

Service Kit for 2 Solex 40 ADDHE 29/31 carburetors for Alfa Romeo Giulietta 116

FR0282
Service Kit for 2 Solex 40 ADDHE 29/31 carburetors for Talbot Matra Murena

Service Kit for 2 x Solex 40 ADDHE 29/31 carburetors for Talbot Matra Murena

Service kit for the Solex 40ADDHE 29 and 31 carburetors as used, amongst others, the Talbot Matra Murena 2200.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 2 carburettors.

Consists of the following parts:

  • All required gaskets
  • 2 Pump Diaphragms
  • 2 Needle Valves
  • 4 Inlet Plenum Gaskets
  • All required rubber o-rings and aluminum washers

This is a Carburetor City carburetor service kit.

Service Kit for 2 Solex 40 ADDHE 29/31 carburetors for Talbot Matra Murena

FR0282
Service Kit for 2 Solex 40 ADDHE 29/31 carburetors for Citroen AX Sport 1300

Service Kit for 2 x Solex 40 ADDHE 29/31 carburetors for Citroen AX Sport 1300

Service kit for the Solex 40ADDHE 29 and 31 carburetors as used on, amongst others, the Citroën AX Sport 1300.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 2 carburettors.

Consists of the following parts:

  • All required gaskets
  • 2 Pump Diaphragms
  • 2 Needle Valves
  • 4 Inlet Plenum Gaskets
  • All required rubber o-rings and aluminum washers

This is a Carburetor City carburetor service kit.

Service Kit for 2 Solex 40 ADDHE 29/31 carburetors for Citroen AX Sport 1300

FR0343
Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen LT

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen LT

Service Kit for Solex Pierburg 30/35 PDSI(T) carburetors as used on, amongst others, the Volkswagen LT28 and LT31.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Choke Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers
  • All other required gaskets

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor service kit.

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen LT

FR0343
Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen Santana

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen Santana

Service Kit for Solex Pierburg 30/35 PDSI(T) carburetors as used on, amongst others, the 1979-series Volkswagen Santana 1600.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Choke Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers
  • All other required gaskets

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor service kit.

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen Santana

FR0343
Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen Passat

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen Passat

Service Kit for Solex Pierburg 30/35 PDSI(T) carburetors as used on, amongst others, the:

  • 1977-series Volkswagen Passat 1300
  • 1975-series Volkswagen Passat 1500
  • 1979-series Volkswagen Passat 1600

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Choke Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers
  • All other required gaskets

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor service kit.

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen Passat

FR0343
Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Audi 60

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Audi 60

Service Kit for Solex Pierburg 30/35 PDSI(T) carburetors as used on, amongst others, the 1968, 1969, 1970, 1971, 1972, 1973 and 1975 Audi 60 1500 & 1600.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Choke Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers
  • All other required gaskets

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor service kit.

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Audi 60

FR0343
Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Audi 80

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Audi 80

Service Kit for Solex Pierburg 30/35 PDSI(T) carburetors as used on, amongst others, the Audi 80 S & LS 1500, the 1974-series Audi 80 1300 & 1600 and 1980-series Audi 80 L, S & LS.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Choke Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers
  • All other required gaskets

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor service kit.

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Audi 80

FR0343
Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen 1500 + 1600 + Variant

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen 1500 + 1600 + Variant

Service Kit for Solex Pierburg 30/35 PDSI(T) carburetors as used on, amongst others, the:

  • 1973-series Volkswagen 1500, 1600 and Variant

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Choke Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers
  • All other required gaskets

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor service kit.

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Volkswagen 1500 + 1600 + Variant

FR0343
Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Opel Kadett

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Opel Kadett

Service Kit for Solex Pierburg 30/35 PDSI(T) carburetors as used on, amongst others, the:

  • 1968-series Opel Kadett B 1700 and Opel Kadett C 1700.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Choke Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers
  • All other required gaskets

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor service kit.

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Opel Kadett

FR0343
Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Opel Rekord

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Opel Rekord

Service Kit for Solex Pierburg 30/35 PDSI(T) carburetors as used on, amongst others, the:

  • 1968-series Opel Rekord C.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Choke Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers
  • All other required gaskets

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor service kit.

Service Kit for Solex Pierburg 35 PDSI(T) carburetors for Opel Rekord

FR0426
Service Kit for Weber 32 DIR 41 carburetors for Alfa Romeo Alfasud 1200 TI

Service Kit for Weber 32 DIR 41 carburetors for Alfa Romeo Alfasud 1200 TI

Service kit for the Weber 32DIR41 series carburetors as, amongst others, used on the following cars:

  • Alfa Romeo Alfasud 1200 TI

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please see the pictures for an example of the markings on a Weber 32 DIR carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Float chamber gasket
  • Base gasket
  • All other required gaskets
  • All required rubber (Viton) o-rings
  • All required copper washers
  • All required aluminum washers

This is a Carburetor City carburetor service kit.

Service Kit for Weber 32 DIR 41 carburetors for Alfa Romeo Alfasud 1200 TI

FR0720
Service Kit for Weber 32 DIR 75/100 carburetors for Renault 5 Alpine Turbo

Service Kit for Weber 32 DIR 75/100 carburetors for Renault 5 Alpine Turbo

Service Kit for Weber 32 DIR 75/100 carburetors for Renault 5 Alpine Turbo.

Service kit for the Weber 32DIR series carburetors as used on the Renault 5 Alpine Turbo.

This 75/100 version of the Weber DIR was especially modified for Turbo-use on the Renault 5 and consequently, this kit contains a number of extra parts to properly services these carburetors.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Float chamber gasket
  • Base gasket
  • Isolator Block + gaskets
  • Choke Diaphragm
  • 6 Shaft Seals
  • All other required gaskets
  • All required rubber (Viton) o-rings
  • All required copper washers
  • All required aluminum washers

This is a Carburetor City carburetor service kit.

Service Kit for Weber 32 DIR 75/100 carburetors for Renault 5 Alpine Turbo

FR1118
Service Kit for Solex PIC and PICT carburetors for Volkswagen

Service Kit for Solex PIC and PICT carburetors for Volkswagen

Service kit for the Solex PIC and PICT carburetors as used mainly on the following Volkswagen models:

  • Volkswagen VW 1303 cc
  • Volkswagen VW 1600 cc
  • Volkswagen VW Polo S 800 cc
  • Volkswagen VW Polo 900
  • Volkswagen VW Polo 900 Coupe 1050 cc
  • Volkswagen VW Polo S/SL 1100 cc
  • Volkswagen VW Derby L 900 cc en 1050 cc
  • Volkswagen VW Derby S/LS 1100 cc
  • Volkswagen VW Golf 1050 cc
  • Volkswagen VW Golf 1100 cc
  • Volkswagen VW Golf S/LS/GLS 1460 cc
  • Volkswagen VW 1600 cc
  • Volkswagen VW Golf S/AT 1500 cc
  • Volkswagen VW Jetta 1300 / 1500 / 1600
  • Volkswagen VW Scirocco - Rabbit 1460 cc
  • Volkswagen VW Scirocco S/AT
  • Volkswagen VW Scirocco 1500

It fits the following variations of the Solex PICT and PIC carburetors:

  • Solex 34 PICT 3
  • Solex 34 PICT 4
  • Solex 34 PICT 5
  • Solex 31 PIC 5
  • Solex 31 PIC 6
  • Solex 31 PIC 7

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains, amongst others, the following parts:

  • All necessary gaskets
  • All necessary copper washers
  • All necessary aluminum washers
  • All necessary rubber (Viton) rings
  • Various diaphragms
  • Needle valve

Contains the parts to service 1 carburettor.

This is a Carburetor City carburetor service kit.

Service Kit for Solex PIC and PICT carburetors for Volkswagen

FR2232
Service Kit for Weber 32 DIR carburetors for Renault 5 TS

Service Kit for Weber 32 DIR carburetors for Renault 5 TS

Service Kit for Weber 32 DIR carburetors for Renault 5 TS.

Service kit for the Weber 32DIR series carburetors as, amongst others, used on the following cars:

  • Renault 5 TS - 1289 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Float chamber gasket
  • Base gasket
  • All other required gaskets
  • All required rubber (Viton) o-rings
  • All required copper washers
  • All required aluminum washers

This is a Carburetor City carburetor service kit.

Service Kit for Weber 32 DIR carburetors for Renault 5 TS

FR2591
Rebuild Kit for 2 Solex 45 ADDHE carburetors for Volvo B-Series

Rebuild Kit for 2 x Solex 45 ADDHE carburetors for Volvo B-Series

Service kit for the quite rare Solex ADDHE 45 milimeter carburetors.

These carburetors can be found, amongst others, on the following cars:

  • Volvo B18
  • Volvo B20
  • Volvo B23 Sport
  • Volvo B30

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 2 carburettors.

Consists of the following parts:

  • All required gaskets
  • 2 Pump Diaphragms
  • 2 Needle Valves size 160
  • 4 Inlet Plenum Gaskets
  • All required rubber o-rings and copper, aluminum and fiber washers

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for 2 Solex 45 ADDHE carburetors for Volvo B-Series

FR2591
Rebuild Kit for 2 Solex 45 ADDHE carburetors for BMW Neue Klasse and 2002

Rebuild Kit for 2 x Solex 45 ADDHE carburetors for BMW Neue Klasse and 2002

Service kit for the quite rare Solex ADDHE 45 milimeter carburetors.

These carburetors can be found, amongst others, on the following cars:

  • BMW 1800 TISA (Neue Klasse)
  • BMW 2000 TI (Neue Klasse)
  • BMW 2002 TI

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 2 carburettors.

Consists of the following parts:

  • All required gaskets
  • 2 Pump Diaphragms
  • 2 Needle Valves size 160
  • 4 Inlet Plenum Gaskets
  • All required rubber o-rings and copper, aluminum and fiber washers

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for 2 Solex 45 ADDHE carburetors for BMW Neue Klasse and 2002

FR3622
Service Kit for Solex Pierburg 32 PDSI carburetors for Ford Taunus

Service Kit for Solex Pierburg 32 PDSI carburetors for Ford Taunus

Service kit for the Solex and Pierburg PDSI 32 series carburetors as, amongst others, used on the following cars:

  • 1968 - 1971 Ford Taunus 12M P4 1200 - 1300 - 1500
  • 1968 - 1971 Ford Taunus 12M TS P4

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gaskets
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor service kit.

Service Kit for Solex Pierburg 32 PDSI carburetors for Ford Taunus

FR3736
Service Kit for Weber 32 DIR 51/250, 61/100, 61/250, 71/250 en 32 DATRA 7/100 carburetors for Alfasud TI and Alfa 33

Service Kit for Weber 32 DIR 51/250, 61/100, 61/250, 71/250 en 32 DATRA 7/100 carburetors for Alfasud TI and Alfa 33

Service Kit for Weber 32 DIR 51/250, 61/100, 61/250, 71/250 en 32 DATRA 7/100 carburetors for Alfasud TI and Alfa 33.

Service kit for the Weber 32 DIR and 32 DATRA series carburetors as used on, amongst others, the following cars:

  • Alfa Romeo Alfasud TI & QV - 1200
  • Alfa Romeo Alfasud TI & QV - 1300
  • Alfa Romeo Alfasud TI & QV - 1500
  • Alfa Romeo Alfasud Sprint - 1300
  • Alfa Romeo Alfa 33 - 1.3
  • Alfa Romeo Alfa 33 - 1.5

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please see the pictures for an example of the markings on a Weber 32 DIR carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Choke Diaphragm
  • Float chamber gasket
  • Base gasket
  • All other required gaskets
  • All required rubber (Viton) o-rings
  • All required copper washers
  • All required aluminum washers

This is a Carburetor City carburetor service kit.

Service Kit for Weber 32 DIR 51/250, 61/100, 61/250, 71/250 en 32 DATRA 7/100 carburetors for Alfasud TI and Alfa 33

FR4201
Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Mercedes

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Mercedes

Service Kit for Solex Pierburg 30 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 30 series carburetors as used on, amongst others, some Mercedes Benz models.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • Isolator block
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Mercedes

FR4201
Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Hanomag

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Hanomag

Service Kit for Solex Pierburg 30 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 30 series carburetors as, amongst others, some Hanomag models.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • Isolator block
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Hanomag

FR4201
Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Opel Olympia

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Opel Olympia

Service Kit for Solex Pierburg 30 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 30 series carburetors as used on, amongst others, on the following cars:

  • 1974 - 1979 Opel Olympia C 1.0 N
  • 1973 - 1979 Opel Olympia C 1.0 S (Export)
  • 1973 - 1979 Opel Olympia C 1.2 N (52 PS)
  • 1976 - 1979 Opel Olympia C 1.2 N (55 PS)

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • Isolator block
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Opel Olympia

FR4855
Service Kit for Solex 32 PAITA carburetors for Steyr 2300

Service Kit for Solex 32 PAITA carburetors for Steyr 2300

Service kit for the Solex 32PAITA carburetors as used on the 1956 - 1958 Steyr 2300 Sport.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburetor service kit.

Service Kit for Solex 32 PAITA carburetors for Steyr 2300

FR4855
Service Kit for Solex 32 PAITA carburetors for Fiat 1900 A

Service Kit for Solex 32 PAITA carburetors for Fiat 1900 A

Service kit for the Solex 32PAITA carburetors as used on the 1954 - 1955 Fiat 1900 A.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburetor service kit.

Service kit for the Solex 32PAITA carburetors as used on the Fiat 1900 A

FR4855
Service Kit for Solex 32 PAITA carburetors for Borgward Isabella TS

Service Kit for Solex 32 PAITA carburetors for Borgward Isabella TS

Service kit for the Solex 32PAITA carburetors as used on the 1955 - 1959 Borgward Isabella TS.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburetor service kit.

Service Kit for Solex 32 PAITA carburetors for Borgward Isabella TS

FR4855
Service Kit for Solex 32 PAITA carburetors for Mercedes 190

Service Kit for Solex 32 PAITA carburetors for Mercedes 190

Service kit for the Solex 32PAITA carburetors as used on the 1956 - 1959 Mercedes Benz 190.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburetor service kit.

Service Kit for Solex 32 PAITA carburetors for Mercedes 190

FR4855
Service Kit for Solex 34 PAITA carburetors for Grosser Borgward

Service Kit for Solex 34 PAITA carburetors for Grosser Borgward

Service kit for the Solex 34PAITA carburetors as used on the 1960 - 1962 Borgward "Grosser Borgward".

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburetor service kit.

Service Kit for Solex 34 PAITA carburetors for Grosser Borgward

FR4855
Service Kit for Solex 32 PAITA carburetors for Borgward H2300

Service Kit for Solex 32 PAITA carburetors for Borgward H2300

Service kit for the Solex 32PAITA carburetors as used on the 1956 - 1958 Borgward H2300.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburetor service kit.

Service Kit for Solex 32 PAITA carburetors for Borgward H2300

FR4855
Service Kit for Solex 32 PAITA carburetors for Mercedes 300 b

Service Kit for Solex 32 PAITA carburetors for Mercedes 300 b

Service kit for the Solex 32PAITA carburetors as used on the 1954 - 1956 Mercedes Benz 300 b.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburetor service kit.

Service Kit for Solex 32 PAITA carburetors for Mercedes 300 b

FR4855
Rebuild Kit for Solex 34 PAITA carburetors for BMW 3200 CS V8

Rebuild Kit for Solex 34 PAITA carburetors for BMW 3200 CS V8

Service kit for the Solex 34PAITA carburetors as used on the 1960 - 1964 BMW 3200 CS V8.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex 34 PAITA carburetors for BMW 3200 CS V8

FR4855
Service Kit for Solex 32 PAITA carburetors for Mercedes 190 b

Service Kit for Solex 32 PAITA carburetors for Mercedes 190 b

Service kit for the Solex 32PAITA carburetors as used on the 1959 - 1961 Mercedes Benz 190 b.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburetor service kit.

Service Kit for Solex 32 PAITA carburetors for Mercedes 190 b

FR4855
Service Kit for Solex 34 PAITA carburetors for Mercedes 220 Sb

Service Kit for Solex 34 PAITA carburetors for Mercedes 220 Sb

Service kit for the Solex 34PAITA carburetors as used on the post-1959 Mercedes Benz 220 Sb.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburetor service kit.

Service Kit for Solex 34 PAITA carburetors for Mercedes 220 Sb

FR4855
Rebuild Kit for Solex 32 PAITA carburetors for BMW 501

Rebuild Kit for Solex 32 PAITA carburetors for BMW 501

Service kit for the Solex 32PAITA carburetors as used on the following BMW models:

  • 1954 - 1955 BMW 501 A
  • 1954 - 1955 BMW 501 B
  • 1955 - 1958 BMW 501/6

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex 32 PAITA carburetors for BMW 501

FR4855
Service Kit for Solex 32 PAITA carburetors for Mercedes 220 S

Service Kit for Solex 32 PAITA carburetors for Mercedes 220 S

Service kit for the Solex 32PAITA carburetors as used on the 1956 - 1959 Mercedes Benz 220 S.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburetor service kit.

Service Kit for Solex 32 PAITA carburetors for Mercedes 220 S

FR4855
Service Kit for Solex 32 PAITA carburetors for Fiat 1400 A

Service Kit for Solex 32 PAITA carburetors for Fiat 1400 A

Service kit for the Solex 32PAITA carburetors as used on the 1954 - 1955 Fiat 1400 A.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburetor service kit.

Service kit for the Solex 32PAITA carburetors as used on the Fiat 1400 A

FR4855
Service Kit for Solex 32 PAITA carburetors for Steyr 2000

Service Kit for Solex 32 PAITA carburetors for Steyr 2000

Service kit for the Solex 32PAITA carburetors as used on the 1956 - 1958 Steyr 2000.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburetor service kit.

Service Kit for Solex 32 PAITA carburetors for Steyr 2000

FR6922
Rebuild Kit for Solex Pierburg 36/40 en 38 PDSI carburetors for BMW and Mercedes

Rebuild Kit for Solex Pierburg 36/40 en 38 PDSI carburetors for BMW and Mercedes

Service Kit for Solex Pierburg 36/40 en 38 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 36/40 and 38 series carburetors as, amongst others, used on the following cars:

  • BMW 1502
  • BMW 1602
  • BMW 1800
  • BMW 1802
  • BMW 2000
  • BMW 2002
  • BMW 518
  • Mercedes Benz 200
  • Mercedes Benz 230 (W110)
  • Mercedes Benz L 601 (208)
  • Mercedes Benz L 208
  • Mercedes Benz L 308
  • Mercedes Benz L 409

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • 3 Pump Diaphragms
  • Complete needle valve
  • 3 Float chamber gaskets
  • 2 Base gaskets
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex Pierburg 36/40 en 38 PDSI carburetors for BMW and Mercedes

FR8721
Service Kit for Weber 32 DIR 24/29 carburetors for Renault 15 TL, 15 TS and 16 TS

Service Kit for Weber 32 DIR 24/29 carburetors for Renault 15 TL, 15 TS and 16 TS

Service Kit for Weber 32DIR 24/29 carburetors for Renault 15 TL, 15 TS and 16 TS.

Service kit for the Weber 32DIR series carburetors as, amongst others, used on the following cars:

  • Renault 15TL
  • Renault 15TS
  • Renault 16TS

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please see the pictures for an example of the markings on a Weber 32 DIR carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Float chamber gasket
  • Base gasket
  • All other required gaskets
  • All required rubber (Viton) o-rings
  • All required copper washers
  • All required aluminum washers

This is a Carburetor City carburetor service kit.

Service Kit for Weber 32 DIR 24/29 carburetors for Renault 15 TL, 15 TS and 16 TS

FR8729
Service Kit for Weber 32 DIR 71 - 81 - 91 - 150 - 151 - 250 carburetors for Alfa Romeo Alfasud and Alfa 33

Service Kit for Weber 32 DIR 71 - 81 - 91 - 150 - 151 - 250 carburetors for Alfa Romeo Alfasud and Alfa 33

Service kit for the Weber 32 DIR series carburetors as, amongst others, used on the following cars:

  • Alfa Romeo Alfasud TI - 1351 cc
  • Alfa Romeo Alfasud Sprint - 1351 + 1490 cc
  • Alfa Romeo Alfasud Super - 1286 + 1490 cc
  • Alfa Romeo Alfa 33 - 79 HP + 1350 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please see the pictures for an example of the markings on a Weber 32 DIR carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Choke Diaphragm
  • Float chamber gasket
  • Base gasket
  • All other required gaskets
  • All required rubber (Viton) o-rings
  • All required copper washers
  • All required aluminum washers

This is a Carburetor City carburetor service kit.

Service Kit for Weber 32 DIR 71 - 81 - 91 - 150 - 151 - 250 carburetors for Alfa Romeo Alfasud and Alfa 33

FR9643
Service Kit for Weber 32 DIR carburetors for Renault 12 TS and 12 TR

Service Kit for Weber 32 DIR carburetors for Renault 12 TS and 12 TR

Service Kit for Weber 32 DIR carburetors for Renault 12 TS and 12 TR.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Float chamber gasket
  • Base gasket
  • All other required gaskets
  • All required rubber (Viton) o-rings
  • All required aluminum washers

This is a Carburetor City carburetor rebuild kit.

Service Kit for Weber 32 DIR carburetors for Renault 12 TS and 12 TR

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki EN450

Rebuild kit for Keihin Carburetors on Kawasaki EN450

Service Kit for the Keihin carburetors as used on the Kawasaki EN450 motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki EN450

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki ZR750 Zephyr

Rebuild kit for Keihin Carburetors on Kawasaki ZR750 Zephyr

Service Kit for the Keihin carburetors as used on the Kawasaki ZR750 Zephyr motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki ZR750 Zephyr

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki ZR1100 Zephyr

Rebuild kit for Keihin Carburetors on Kawasaki ZR1100 Zephyr

Service Kit for the Keihin carburetors as used on the Kawasaki ZR1100 Zephyr motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki ZR1100 Zephyr

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki ZL1000 Eliminator

Rebuild kit for Keihin Carburetors on Kawasaki ZL1000 Eliminator

Service Kit for the Keihin carburetors as used on the 1987 - 1988 Kawasaki ZL1000 Eliminator motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki ZL1000 Eliminator

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki GPZ750 R

Rebuild kit for Keihin Carburetors on Kawasaki GPZ750 R

Service Kit for the Keihin carburetors as used on the Kawasaki GPZ750 R motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki GPZ750 R

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki ZR550 Zephyr

Rebuild kit for Keihin Carburetors on Kawasaki ZR550 Zephyr

Service Kit for the Keihin carburetors as used on the Kawasaki ZR550 Zephyr motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki ZR550 Zephyr

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki ZG1200

Rebuild kit for Keihin Carburetors on Kawasaki ZG1200

Service Kit for the Keihin carburetors as used on the 1986 Kawasaki ZG1200 A1 en 1987-2003 Kawasaki ZG1200 B1 - B17 motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki ZG1200

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki GPZ900 R

Rebuild kit for Keihin Carburetors on Kawasaki GPZ900 R

Service Kit for the Keihin carburetors as used on the Kawasaki GPZ900 R motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki GPZ900 R

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki ZL900 Eliminator

Rebuild kit for Keihin Carburetors on Kawasaki ZL900 Eliminator

Service Kit for the Keihin carburetors as used on the Kawasaki ZL900 Eliminator motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki ZL900 Eliminator

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki GPZ1000 RX

Rebuild kit for Keihin Carburetors on Kawasaki GPZ1000 RX

Service Kit for the Keihin carburetors as used on the 1986 - 1987 Kawasaki GPZ1000 RX motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki GPZ1000 RX

KSK1217KK
Rebuild kit for Keihin Carburetors on Suzuki GSF600 Bandit

Rebuild kit for Keihin Carburetors on Suzuki GSF600 Bandit

Service Kit for the Keihin carburetors as used on the 1995 - 2003 Suzuki GSF600 Bandit.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Suzuki GSF600 Bandit

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki EL250

Rebuild kit for Keihin Carburetors on Kawasaki EL250

Service Kit for the Keihin carburetors as used on the:

  • 1988 - 1989 Kawasaki EL250 (B1 / B3)
  • 1991 - 1994 Kawasaki EL250 (E1 - E4)

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki EL250

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki BJ250 Estrella

Rebuild kit for Keihin Carburetors on Kawasaki BJ250 Estrella

Service Kit for the Keihin carburetors as used on the 1994 - 1999 Kawasaki BJ250 Estrella motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki BJ250 Estrella

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki ZXR400

Rebuild kit for Keihin Carburetors on Kawasaki ZXR400

Service Kit for the Keihin carburetors as used on the 1989 - 1990 Kawasaki ZXR400.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki ZXR400

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki GPZ600 R

Rebuild kit for Keihin Carburetors on Kawasaki GPZ600 R

Service Kit for the Keihin carburetors as used on the 1985 - 1990 Kawasaki GPZ600 R motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki GPZ600 R

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki EX250

Rebuild kit for Keihin Carburetors on Kawasaki EX250

Service Kit for the Keihin carburetors as used on the Kawasaki EX250 motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki EX250

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki GPZ250

Rebuild kit for Keihin Carburetors on Kawasaki GPZ250

Service Kit for the Keihin carburetors as used on the 1986 - 1993 Kawasaki GPZ250 motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki GPZ250

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki KLR250

Rebuild kit for Keihin Carburetors on Kawasaki KLR250

Service Kit for the Keihin carburetors as used on the 1985 - 1997 Kawasaki KLR250 motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki KLR250

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki GPX600 R

Rebuild kit for Keihin Carburetors on Kawasaki GPX600 R

Service Kit for the Keihin carburetors as used on the 1988 - 1996 Kawasaki GPX600 R motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki GPX600 R

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki KLX250

Rebuild kit for Keihin Carburetors on Kawasaki KLX250

Service Kit for the Keihin carburetors as used on the 1993 - 1994 Kawasaki KLX250 motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki KLX250

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki ZL600 Eliminator

Rebuild kit for Keihin Carburetors on Kawasaki ZL600 Eliminator

Service Kit for the Keihin carburetors as used on the Kawasaki ZL600 Eliminator motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki ZL600 Eliminator

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki ZX600

Rebuild kit for Keihin Carburetors on Kawasaki ZX600

Service Kit for the Keihin carburetors as used on the:

  • Kawasaki ZX600 (A1-A3) 1985 - 1987
  • Kawasaki ZX600 B1 1987
  • Kawasaki ZX600 C1-C10 1988 - 1997

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki ZX600

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki EN500

Rebuild kit for Keihin Carburetors on Kawasaki EN500

Service Kit for the Keihin carburetors as used on the EN500 motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki EN500

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki ER5

Rebuild kit for Keihin Carburetors on Kawasaki ER5

Service Kit for the Keihin carburetors as used on the Kawasaki ER5 motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki ER5

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki GPZ500 S

Rebuild kit for Keihin Carburetors on Kawasaki GPZ500 S

Service Kit for the Keihin carburetors as used on the 1987 - 2003 Kawasaki GPZ500 S motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki GPZ500 S

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki KLE500

Rebuild kit for Keihin Carburetors on Kawasaki KLE500

Service Kit for the Keihin carburetors as used on the 1991 - 2005 Kawasaki KLE500 motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki KLE500

KSK1217KK
Rebuild kit for Keihin Carburetors on Kawasaki R5 Twister

Rebuild kit for Keihin Carburetors on Kawasaki R5 Twister

Service Kit for the Keihin carburetors as used on the 1997 - 2003 Kawasaki R5 Twister motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve
  • Mixture Screw Set

Although these carburetors were originally delivered on the above mentioned motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Kawasaki R5 Twister

KSK1345BK
Elaborate Service Kit for Mikuni BST 33 carburetors

Elaborate Service Kit for Mikuni BST 33 carburetors

Elaborate Service Kit for Mikuni BST 33 carburetors.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve Set
  • Main Jet # 140
  • Idle Jet # 41.3
  • Needle # Y430 = 5E94
  • Needle Clip
  • Needle Jet # 584 0-2
  • Mixture Screw Assembly
  • Various Washers and Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

Elaborate Service Kit for Mikuni BST 33 carburetors

Please note:
This article is currently on order from the manufacturer.
We expect the new supply to arrive at our warehouse by Wednesday, March 8, 2017.
If you don't want to miss out on it, feel free to place your order now.
Payment is not required until we have your shipment ready to go for you.

KSK1345BK
Rebuild Kit for Mikuni BST33 carburetors for BMW F650

Elaborate Rebuild Kit for Mikuni BST33 carburetors for BMW F650

Elaborate service kit for Mikuni BST 33 carburetors as used on BMW F650 motorcycles.

Although these carburetors were originally delivered on the above mentioned BMW F-650, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve Set
  • Main Jet # 140
  • Idle Jet # 41.3
  • Needle # Y430 = 5E94
  • Needle Clip
  • Needle Jet # 584 0-2
  • Mixture Screw Assembly
  • Various Washers and Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

Rebuild Kit for Mikuni BST33 carburetors for BMW F650

Please note:
This article is currently on order from the manufacturer.
We expect the new supply to arrive at our warehouse by Wednesday, March 8, 2017.
If you don't want to miss out on it, feel free to place your order now.
Payment is not required until we have your shipment ready to go for you.

KSK584
Rebuild Kit for Mikuni BST40 carburetors for Suzuki GSXR1100W

Rebuild Kit for Mikuni BST40 carburetors for Suzuki GSXR1100W

Service Kit for Mikuni BST 40 carburetors as used on, amongst others, the 1993 - 1995 Suzuki GSXR1100W motorcycles.

Although these carburetors were originally delivered on the above mentioned Suzuki, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve Set
  • Various Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

Rebuild Kit for Mikuni BST40 carburetors for Suzuki GSXR1100W

KSK584
Rebuild Kit for Mikuni BST 38 carburetors for Suzuki GSXR750W

Rebuild Kit for Mikuni BST 38 carburetors for Suzuki GSXR750W

Service Kit for Mikuni BST38 carburetors as used on, amongst others, the 1992 - 1995 Suzuki GSXR750W motorcycles.

Although these carburetors were originally delivered on the above mentioned Suzuki, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve Set
  • Various Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

Rebuild Kit for Mikuni BST 38 carburetors for Suzuki GSXR750W

KSK584
Service Kit for Mikuni BST 38 carburetors

Service Kit for Mikuni BST 38 carburetors

Service Kit for Mikuni BST38 carburetors.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve Set
  • Various Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

 

Service Kit for Mikuni BST 38 carburetors

KSK584
Service Kit for Mikuni BST40 carburetors

Service Kit for Mikuni BST40 carburetors

Service Kit for Mikuni BST 40 carburetors.

Please verify that the parts shown with fit your bike.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Needle Valve Set
  • Various Rubber (Viton) O-Rings (See photo)

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BST40 carburetors

KSK688
Service Kit for Mikuni BDST carburetors for Yamaha TDM 850

Service Kit for Mikuni BDST carburetors for Yamaha TDM 850

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Yamaha TDM 850.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BDST carburetors for Yamaha TDM 850

KSK688
Service Kit for Mikuni BDST carburetors for Ducati 900 SS

Service Kit for Mikuni BDST carburetors for Ducati 900 SS

Newly arrived Service Kit for Mikuni BDST carburetors for Ducati 900 SS

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Ducati 900 SS SuperSport (1991 - 1998).

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BDST carburetors for Ducati 900 SS

KSK688
Service Kit for Mikuni BDST carburetors for Ducati 900 Monster

Service Kit for Mikuni BDST carburetors for Ducati 900 Monster

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Ducati 900 Monster (1993 - 1998).

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BDST carburetors for Ducati 900 Monster

KSK688
Service Kit for Mikuni BDST carburetors for Cagiva Elefant 750 and 900

Service Kit for Mikuni BDST carburetors for Cagiva Elefant 750 and 900

Service Kit for Mikuni BDST carburetors as used on the Cagiva Elefant 750 & 900.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BDST carburetors for Cagiva Elefant 750 and 900

KSK688
Service Kit for Mikuni BDST carburetors for Yamaha XTZ 750

Service Kit for Mikuni BDST carburetors for Yamaha XTZ 750

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Yamaha XTZ 750.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BDST carburetors for Yamaha XTZ 750

KSK688
Service Kit for Mikuni BDST carburetors for Ducati 600 SS

Service Kit for Mikuni BDST carburetors for Ducati 600 SS

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Ducati 600 SS SuperSport.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BDST carburetors for Ducati 600 SS

KSK688
Service Kit for Mikuni BDST carburetors for Ducati 750 Monster

Service Kit for Mikuni BDST carburetors for Ducati 750 Monster

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Ducati 750 Monster (1991 - 1998).

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BDST carburetors for Ducati 750 Monster

KSK688
Service Kit for Mikuni BDST carburetors for Yamaha TRX 850

Service Kit for Mikuni BDST carburetors for Yamaha TRX 850

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Yamaha TRX 850.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BDST carburetors for Yamaha TRX 850

KSK688
Service Kit for Mikuni BDST carburetors for Yamaha FZR1000 Exup

Service Kit for Mikuni BDST carburetors for Yamaha FZR1000 Exup

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Yamaha FZR1000 Exup.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BDST carburetors for Yamaha FZR1000 Exup

KSK688
Service Kit for Mikuni BDST carburetors for Ducati 600 Monster

Service Kit for Mikuni BDST carburetors for Ducati 600 Monster

Service Kit for Mikuni BDST carburetors as used on , amongst others, the Ducati 600 Monster.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BDST carburetors for Ducati 600 Monster

KSK688
Service Kit for Mikuni BDST carburetors for Yamaha YZF750R

Service Kit for Mikuni BDST carburetors for Yamaha YZF750R

Service Kit for Mikuni BDST carburetors as used on, amongst others, the Yamaha YZF 750 R.

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BDST carburetors for Yamaha YZF750R

KSK688
Service Kit for Mikuni BDST carburetors for Ducati 750 SS

Service Kit for Mikuni BDST carburetors for Ducati 750 SS

Service Kit for Mikuni BDST carburetors as used on , amongst others, the Ducati 750 SS SuperSport (1991 - 1998).

Contains the following parts to service 1 carburettor:

  • Rubber (Viton) Float Chamber Gasket
  • Rubber (Viton) Jet Holder Gasket
  • 4 Rubber (Viton) O-Rings of Different Sizes
  • Viton tipped needle valve

Although these carburetors were originally delivered on the above mentioned models of motorcycles, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

This is a Carburetor City carburetor service kit.

Service Kit for Mikuni BDST carburetors for Ducati 750 SS

KSK843KK
Carburetor Service Kit for Kawasaki Z400J

Carburetor Service Kit for Kawasaki Z400J

Service Kit for the carburetors as used on the Kawasaki Z400J motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Needle valve Set
  • Mixture Screw Set
  • Idle jet
  • Various Viton (rubber) o-rings

Although these carburetors were originally delivered on the above mentioned Kawasaki Z400J, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Carburetor Service Kit for Kawasaki Z400J

KSK843KK
Carburetor Service Kit for Kawasaki Z500

Carburetor Service Kit for Kawasaki Z500

Service Kit for the carburetors as used on the Kawasaki Z500 motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Needle valve Set
  • Mixture Screw Set
  • Idle jet
  • Various Viton (rubber) o-rings

Although these carburetors were originally delivered on the above mentioned Kawasaki Z500, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Carburetor Service Kit for Kawasaki Z500

KSK843KK
Carburetor Service Kit for Kawasaki Z550

Carburetor Service Kit for Kawasaki Z550

Service Kit for the carburetors as used on the Kawasaki Z550 motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Needle valve Set
  • Mixture Screw Set
  • Idle jet
  • Various Viton (rubber) o-rings

Although these carburetors were originally delivered on the above mentioned Kawasaki Z550, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Carburetor Service Kit for Kawasaki Z550

KSK941YK
Rebuild kit for Mikuni BDS Carburetors on Yamaha XV 535 Virago

Rebuild kit for Mikuni BDS Carburetors on Yamaha XV 535 Virago

Service Kit for the Mikuni BDS carburetors as used on the Yamaha XV535 Virago motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Various Viton (rubber) o-rings as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XV 535 , they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader. Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Mikuni BDS Carburetors on Yamaha XV 535 Virago

KSK941YK
Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1200 Venture

Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1200 Venture

Newly arrived Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1200 Venture

Service Kit for the Mikuni BDS carburetors as used on the Yamaha XVZ1200 Venture motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Various Viton (rubber) o-rings as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XVZ 1200, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader. Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1200 Venture

KSK941YK
Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1300 Venture

Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1300 Venture

Service Kit for the Mikuni BDS carburetors as used on the Yamaha XVZ1300 motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Various Viton (rubber) o-rings as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha XVZ 1300, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader. Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Mikuni BDS Carburetors on Yamaha XVZ 1300 Venture

KSK941YK
Rebuild kit for Mikuni BDS Carburetors on Yamaha VMX 1200 V-Max

Rebuild kit for Mikuni BDS Carburetors on Yamaha VMX 1200 V-Max

Service Kit for the Mikuni BDS carburetors as used on the Yamaha VMX1200 V-Max motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Jet Block Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Various Viton (rubber) o-rings as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha VMX 1200 , they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader. Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Mikuni BDS Carburetors on Yamaha VMX 1200 V-Max

KSKH0899NR
Rebuild kit for Keihin Carburetors on Honda CB550F K3 1977-1979

Rebuild kit for Keihin Carburetors on Honda CB550F K3 1977-1979

Service Kit for the Keihin PD46A carburetors as used on the 1977, 1978 and 1979 Honda CB550 K3 motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Needle D376
  • Needle Clip
  • Needle Jet
  • Main jet, size 90
  • Various Viton (rubber) o-rings as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Honda CB550F K3, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader. Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

Base settings:

  • Needle: 3rd notch
  • Float Level: 14.5 mm
  • Mixture screw: fully in until gently seated, then 1½ turn out

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Honda CB550F K3 1977-1979

KSKH1018NR
Rebuild kit for Keihin Carburetors on Honda CBX1000 SC03 1979-1980

Rebuild kit for Keihin Carburetors on Honda CBX1000 SC03 1979-1980

Service Kit for the Keihin carburetors as used on the 1979 and 1980 Honda CBX1000 SC03 motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Needle D306
  • Needle Jet
  • Main jet, size 65
  • Main jet, size 98
  • Various Viton (rubber) o-rings and washers as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Honda CBX1000, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader. Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Honda CBX1000 SC03 1979-1980

KSKH1186NR
Rebuild kit for Keihin Carburetors on Honda CB750F K2 1972-1975

Rebuild kit for Keihin Carburetors on Honda CB750F K2 1972-1975

Service Kit for the Keihin carburetors as used on the 1972, 1973, 1974 and 1975 Honda CB750 Four K2 motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Needle D17
  • Needle Clip
  • Needle Jet
  • Main jet, size 110
  • Idle jet, size 40
  • Various Viton (rubber) o-rings as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Honda CB750F K2, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader. Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

Base settings:

  • Needle: 4th notch
  • Float Level: 26 mm
  • Mixture screw: fully in until gently seated, then 1 full turn out

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Honda CB750F K2 1972-1975

KSKH1187NR
Rebuild kit for Keihin Carburetors on Honda CB750F K6 F1 1975-1977

Rebuild kit for Keihin Carburetors on Honda CB750F K6 F1 1975-1977

Service Kit for the Keihin carburetors as used on the 1975, 1976 and 1977 Honda CB750 Four K6 and F1 motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Needle D54
  • Needle Clip
  • Needle Jet Set
  • Main jet, size 105
  • Idle jet, size 40
  • Various Viton (rubber) o-rings, gaskets and washers as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Honda CB750F K2, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader. Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

Base settings:

  • Float Level: 26 mm
  • Mixture screw: fully in until gently seated, then 1 full turn out

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Honda CB750F K6 F1 1975-1977

KSKH1212NR
Rebuild kit for Keihin Carburetors on Honda CB350 Four 1972-1974

Rebuild kit for Keihin Carburetors on Honda CB350 Four 1972-1974

Service Kit for the Keihin carburetors as used on the 1972 - 1974 Honda CB350F motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Needle valve Set
  • Mixture Screw Set
  • Needle D22
  • Needle Jet
  • Main jet, size 75
  • Idle jet, size 35
  • Various Viton (rubber) o-rings

Although these carburetors were originally delivered on the above mentioned Honda CB350F, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

Base setting:

  • Needle: 3rd notch
  • Float Level: 21 mm
  • Mixture screw: fully in until gently seated, then ⅞th turn out

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Honda CB350 Four 1972-1974

KSKH1213NR
Rebuild kit for Keihin Carburetors on Honda CB400 Four 1975-1978

Rebuild kit for Keihin Carburetors on Honda CB400 Four 1975-1978

Service Kit for the Keihin carburetors as used on the 1975 - 1978 Honda CB400F motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Needle Valve Set
  • Needle D22
  • Needle Clip
  • Needle Jet
  • Mixture Screw Set
  • Idle jet, size 40
  • Main jet, size 75
  • Various Viton (rubber) o-rings

Although these carburetors were originally delivered on the above mentioned Honda CB400F, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.
Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

Base settings:

  • Needle: 3rd notch
  • Float Level: 21 mm
  • Mixture screw: fully in until gently seated, then 2 turns out

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Honda CB400 Four 1975-1978

KSKH1220NFR
Rebuild kit for Keihin Carburetors on Honda CB550 F Super Sport 1975-1978

Rebuild kit for Keihin Carburetors on Honda CB550 F Super Sport 1975-1978

Service Kit for the Keihin carburetors as used on the 1975, 1976, 1977 and 1978 Honda CB550F Super Sport motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Top Cover Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Needle D274
  • Needle Clip
  • Needle Jet 16012-390-004
  • Main jet, size 98
  • Idle jet, size 38
  • Various Viton (rubber) o-rings as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Honda CB550F SS, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader. Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

Base settings:

  • Needle: 2nd notch
  • Float Level: 22 mm
  • Mixture screw: fully in until gently seated, then 1½ turn out

This is a Carburetor City carburetor service kit.

Rebuild kit for Keihin Carburetors on Honda CB550 F Super Sport 1975-1978

KSKY0561
Mikuni Carburetor Service Kit for Yamaha FJ1200 3CW en 3YA

Mikuni Carburetor Service Kit for Yamaha FJ1200 3CW en 3YA

Service Kit for the Mikuni carburetors as used on the 1988 - 1995 Yamaha FJ1200 3CW en 3YA motorcycles.

This service kit contains the following parts to service 1 carburettor:

  • Float Bowl Gasket
  • Needle Valve Set
  • Mixture Screw Set
  • Needle 5FZ74
  • Needle Clip
  • Needle Jet Y-2
  • Main jet, size 110
  • Idle jet 42.5
  • Drain Plug
  • Various Viton (rubber) o-rings as depicted in the photograph

Although these carburetors were originally delivered on the above mentioned Yamaha FJ1200, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader. Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown with fit your bike.

Base settings:

  • Needle: 3rd notch
  • Float Level: 21.3 - 23.3 mm
  • Mixture screw: fully in until gently seated, then 3 full turns out

This is a Carburetor City carburetor service kit.

Mikuni Carburetor Service Kit for Yamaha FJ1200 3CW en 3YA

PMH13
Service Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki Cervo

Service Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki Cervo

Service kit for the Solex Mikuni 28 30 PHD carburetors as used on the Suzuki Cervo.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various gaskets
  • Various aluminum washers
  • Copper washer
  • Rubber o-ring

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please note that the PHD was produced both as Solex PHD and under license by Mikuni.

The Mikuni PHD can be found HERE.
The Solex PHD can be found HERE.

This is a Carburetor City carburetor service kit.

Service Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki Cervo

PMH13
Service Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki ST80 and ST90

Service Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki ST80 and ST90

Service kit for the Solex Mikuni 28 30 PHD carburetors as used on the Suzuki ST80 and Suzuki ST90.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various gaskets
  • Various aluminum washers
  • Copper washer
  • Rubber o-ring

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please note that the PHD was produced both as Solex PHD and under license by Mikuni.

The Mikuni PHD can be found HERE.
The Solex PHD can be found HERE.

This is a Carburetor City carburetor service kit.

Service Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki ST80 and ST90

PMH13
Service Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki LJ80 and LJ81

Service Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki LJ80 and LJ81

Service kit for the Solex Mikuni 28 30 PHD carburetors as used on the 1980 - 1981 Suzuki LJ80 & LJ81.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various gaskets
  • Various aluminum washers
  • Copper washer
  • Rubber o-ring

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please note that the PHD was produced both as Solex PHD and under license by Mikuni.

The Mikuni PHD can be found HERE.
The Solex PHD can be found HERE.

This is a Carburetor City carburetor service kit.

Service Kit for Solex Mikuni 28-30 PHD carburetors for Suzuki LJ80 and LJ81

PMH13
Service Kit for Solex Mikuni 32 PHD carburetors for Suzuki SJ20

Service Kit for Solex Mikuni 32 PHD carburetors for Suzuki SJ20

Service kit for the Solex Mikuni 32 PHD carburetors as used on the 1980 - 1982 Suzuki SJ20 4WD.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Various gaskets
  • Various aluminum washers
  • Copper washer
  • Rubber o-ring

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please note that the PHD was produced both as Solex PHD and under license by Mikuni. The Mikuni PHD can be found HERE. The Solex PHD can be found HERE.

This is a Carburetor City carburetor service kit.

Service Kit for Solex Mikuni 32 PHD carburetors for Suzuki SJ20

PMS100
Service Kit for 2 x Solex 35 PHH carburetors for Lancia Fulvia 1300

Service Kit for 2 x Solex 35 PHH carburetors for Lancia Fulvia 1300

Service kit for 2 Solex PHH 35 carburetors as used on the Lancia Fulvia 1300.

Contains the parts to service 2 carburettors.

Consists amongst others of the following parts:

  • 2 Complete gasket sets
  • 2 Pump Diaphragms
  • 2 Needle Valves in size 1,1
  • All required rubber (Viton) o-rings
  • All required fiber washers
  • All required copper washers

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit.

Service Kit for 2 x Solex 35 PHH carburetors for Lancia Fulvia 1300

PMS102
Service Kit for 2 x Solex 40 DDH carburetors

Service Kit for 2 x Solex 40 DDH carburetors

Newly arrived Service Kit for 2 x Solex 40 DDH carburetors

Service kit for the Solex 40 DDH 3, 5, 7 & 8 carburetors.

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 2 carburettors.

Consists of the following parts:

  • All required gaskets
  • 2 Pump Diaphragms
  • 2 Needle Valves Size 1.6
  • 4 Inlet Plenum Gaskets
  • All required rubber o-rings
  • All required fiber washers
  • All required aluminum washers

This is a Carburetor City carburetor service kit.

Service Kit for 2 x Solex 40 DDH carburetors

PMS102
Service Kit for 2 x Solex 40 DDH 7 carburetors for Alfa Romeo Alfetta 1800 GT

Service Kit for 2 x Solex 40 DDH 7 carburetors for Alfa Romeo Alfetta 1800 GT

Service kit for the Solex 40 DDH 7 carburetors as used on, amongst others, the Alfa Romeo Alfetta 1800 GT.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 2 carburettors.

Consists of the following parts:

  • All required gaskets
  • 2 Pump Diaphragms
  • 2 Needle Valves Size 1.6
  • 4 Inlet Plenum Gaskets
  • All required rubber o-rings
  • All required fiber washers
  • All required aluminum washers

This is a Carburetor City carburetor service kit.

Service Kit for 2 x Solex 40 DDH 7 carburetors for Alfa Romeo Alfetta 1800 GT

PMS102
Service Kit for 2 x Solex 40 DDH 8 carburetors for Alfa Romeo Alfetta 2000 GTV

Service Kit for 2 x Solex 40 DDH 8 carburetors for Alfa Romeo Alfetta 2000 GTV

Service kit for the Solex 40 DDH 8 carburetors as used on, amongst others, the Alfa Romeo Alfetta 2000 GTV.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 2 carburettors.

Consists of the following parts:

  • All required gaskets
  • 2 Pump Diaphragms
  • 2 Needle Valves Size 1.6
  • 4 Inlet Plenum Gaskets
  • All required rubber o-rings
  • All required fiber washers
  • All required aluminum washers

This is a Carburetor City carburetor service kit.

Service Kit for 2 x Solex 40 DDH 8 carburetors for Alfa Romeo Alfetta 2000 GTV

PMS102
Service Kit for 2 x Solex 40 DDH 5 carburetors for Alfa Romeo Alfetta 1600 GT

Service Kit for 2 x Solex 40 DDH 5 carburetors for Alfa Romeo Alfetta 1600 GT

Service kit for the Solex 40 DDH 5 carburetors as used on, amongst others, the Alfa Romeo Alfetta 1600 GT.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 2 carburettors.

Consists of the following parts:

  • All required gaskets
  • 2 Pump Diaphragms
  • 2 Needle Valves Size 1.6
  • 4 Inlet Plenum Gaskets
  • All required rubber o-rings
  • All required fiber washers
  • All required aluminum washers

This is a Carburetor City carburetor service kit.

Service Kit for 2 x Solex 40 DDH 5 carburetors for Alfa Romeo Alfetta 1600 GT

PMS102
Service Kit for 2 x Solex 40 DDH 3 carburetors for Alfa Romeo Giulia 1600 Super

Service Kit for 2 x Solex 40 DDH 3 carburetors for Alfa Romeo Giulia 1600 Super

Newly arrived Service Kit for 2 x Solex 40 DDH 3 carburetors for Alfa Romeo Giulia 1600 Super

Service kit for the Solex 40 DDH 3 carburetors as used on, amongst others, the Alfa Romeo Giulia 1600 Super.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 2 carburettors.

Consists of the following parts:

  • All required gaskets
  • 2 Pump Diaphragms
  • 2 Needle Valves Size 1.6
  • 4 Inlet Plenum Gaskets
  • All required rubber o-rings
  • All required fiber washers
  • All required aluminum washers

This is a Carburetor City carburetor service kit.

Service Kit for 2 x Solex 40 DDH 3 carburetors for Alfa Romeo Giulia 1600 Super

PMS102
Service Kit for 2 x Solex 40 DDH 5-7-8 carburetors for Alfa Romeo 105 Series 1750 and 2000

Service Kit for 2 x Solex 40 DDH 5-7-8 carburetors for Alfa Romeo 105 Series 1750 and 2000

Service kit for the Solex 40 DDH carburetors, versions 5, 7 and 8, as used on, amongst others, the Alfa Romeo 105 Series Berlina and GTV 1750 and 2000.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 2 carburettors.

Consists of the following parts:

  • All required gaskets
  • 2 Pump Diaphragms
  • 2 Needle Valves Size 1.6
  • 4 Inlet Plenum Gaskets
  • All required rubber o-rings
  • All required fiber washers
  • All required aluminum washers

This is a Carburetor City carburetor service kit.

Service Kit for 2 x Solex 40 DDH 5-7-8 carburetors for Alfa Romeo 105 Series 1750 and 2000

PMS115
Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 404

Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 404

Service kit for the Solex 32 PBICA carburetors as used on, amongst others, the:

  • 1962 - 1972 Peugeot 404 XC5 - 1618 cc
  • 1970 - 1975 Peugeot 404 XC7 - 1618 cc
  • 1966 - 1975 Peugeot 404 Automatic XC7 - 1618 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Manifold Gasket
  • Pump Diaphragm
  • Flexible Pump Gasket
  • Flexible Pump Jet Gasket
  • Needle Valve assembly; size 1.7
  • Various Fiber Washers
  • Various Copper O-Rings

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 404

PMS115
Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 403

Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 403

Service kit for the Solex 32 PBICA carburetors as used on, amongst others, the:

  • 1955 - 1967 Peugeot 403 - 1290 cc
  • 1955 - 1967 Peugeot 403 - 1468 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Manifold Gasket
  • Pump Diaphragm
  • Flexible Pump Gasket
  • Flexible Pump Jet Gasket
  • Needle Valve assembly; size 1.7
  • Various Fiber Washers
  • Various Copper O-Rings

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 403

Solex
PMS115
Rebuild Kit for Solex 32 PBICA carburetors for Peugeot J7 E & F

Rebuild Kit for Solex 32 PBICA carburetors for Peugeot J7 E & F

Service kit for the Solex 32 PBICA carburetors as used on, amongst others, the:

  • 1970 - 1975 Peugeot J7 E 1600 - 1618 cc
  • 1970 - 1975 Peugeot J7 F 1800 - 1796 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Manifold Gasket
  • Pump Diaphragm
  • Flexible Pump Gasket
  • Flexible Pump Jet Gasket
  • Needle Valve assembly; size 1.7
  • Various Fiber Washers
  • Various Copper O-Rings

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex 32 PBICA carburetors for Peugeot J7 E & F

PMS115
Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 504

Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 504

Service kit for the Solex 32 PBICA carburetors as used on, amongst others, the:

  • 1968 - 1975 Peugeot 504 XM - XM7 - 1796 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Manifold Gasket
  • Pump Diaphragm
  • Flexible Pump Gasket
  • Flexible Pump Jet Gasket
  • Needle Valve assembly; size 1.7
  • Various Fiber Washers
  • Various Copper O-Rings

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 504

PMS137
Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Vauxhall Astra

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Vauxhall Astra

Rebuild Kit for Solex Pierburg 35 PDSI carburetors.

Rebuild kit for the Solex and Pierburg PDSI 35 series carburetors as used on, amongst others, the:

  • 1980 - 1984 Vauxhall Astra 1200

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Vauxhall Astra

PMS137
Service Kit for Solex Pierburg 35 PDSI carburetors for Opel Kadett

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Kadett

Rebuild Kit for Solex Pierburg 35 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 35 series carburetors as used on, amongst others, the:

  • 1970 - 1973 Opel Kadett B 1100 N & S
  • 1971 - 1973 Opel Kadett B 1200 S
  • 1973 - 1979 Opel Kadett C 1200 N & S
  • 1979 - 1984 Opel Kadett D 1000
  • 1979 - 1984 Opel Kadett D 1200 N & S
  • 1979 - 1984 Opel Kadett D 1300 N
  • 1984 - 1986 Opel Kadett E 1300 N

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Kadett

PMS137
Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Manta

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Manta

Rebuild Kit for Solex Pierburg 35 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 35 series carburetors as used on, amongst others, the:

  • 1972 - 1975 Opel Manta A 1200
  • 1970 - 1975 Opel Manta A 1600 N
  • 1975 - 1981 Opel Manta B 1200
  • 1979 - 1981 Opel Manta B 1300 N
  • 1975 - 1978 Opel Manta B 1600
  • 1976 - 1981 Opel Manta B 1900 N
  • 1981 Opel Manta 1300 N & S

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Manta

PMS137
Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Rekord

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Rekord

Rebuild Kit for Solex Pierburg 35 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 35 series carburetors as used on, amongst others, the:

  • 1972 - 1977 Opel Rekord D 1700 N & L
  • 1975 - 1977 Opel Rekord D 1900 N
  • 1977 - 1982 Opel Rekord E 1700 N & 1900 N

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Rekord

PMS137
Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Ascona

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Ascona

Rebuild Kit for Solex Pierburg 35 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 35 series carburetors as used on, amongst others, the:

  • 1972 - 1975 Opel Ascona A 1200
  • 1970 - 1975 Opel Ascona A 1600 N
  • 1975 - 1981 Opel Ascona B 1200
  • 1979 - 1981 Opel Ascona B 1300 N
  • 1975 - 1978 Opel Ascona B 1600
  • 1976 - 1981 Opel Ascona B 1900 N
  • 1981 Opel Ascona C 1300 N & S

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • All required copper washers
  • All required aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City carburetor rebuild kit.

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Ascona

PMS166
Service Kit for Pierburg 32-35 TDID carburetors for Audi 100

Service Kit for Pierburg 32-35 TDID carburetors for Audi 100

Service kit for the Solex 32-35 TDID carburetors as used on, amongst others, the Audi 100 GL and GLS 1600.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please verify that the parts in the picture will fit your carburetor as there were many varieties of this model which all differ in detail.
Please contact us in case of doubt.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Various carburetor-to-manifold gaskets
  • Various gaskets for the choke mechanism
  • Pump diaphragm
  • Needle Valve assembly; size 200
  • Various Aluminum Washers
  • Various Copper Washers
  • Various Viton O-Rings

This is a Carburetor City carburetor rebuild kit.

Service Kit for Pierburg 32-35 TDID carburetors for Audi 100

PMS166
Service Kit for Pierburg 32-35 TDID carburetors for Audi 80

Service Kit for Pierburg 32-35 TDID carburetors for Audi 80

Service kit for the Solex 32-35 TDID carburetors as used on, amongst others, the Audi 80 GL 1500.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please verify that the parts in the picture will fit your carburetor as there were many varieties of this model which all differ in detail.
Please contact us in case of doubt.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Various carburetor-to-manifold gaskets
  • Various gaskets for the choke mechanism
  • Pump diaphragm
  • Needle Valve assembly; size 200
  • Various Aluminum Washers
  • Various Copper Washers
  • Various Viton O-Rings

This is a Carburetor City carburetor rebuild kit.

Service Kit for Pierburg 32-35 TDID carburetors for Audi 80

PMS170
Service Kit for Pierburg 36 1B3 carburetors for Volkswagen LT

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen LT

Service kit for the Pierburg 36 1 B3 carburetor as used on, amongst others, the:

  • 1979 - 1982 Volkswagen LT Van - 1984 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen LT

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Iltis

Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Iltis

Service kit for the Pierburg 36 1 B1 carburetor as used on, amongst others, the:

  • 1978 - 1983 Volkswagen Iltis 4x4 - 1700 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Iltis

PMS170
Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Scirocco 1500

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Scirocco 1500

Service kit for the Pierburg 36 1 B3 carburetor as used on, amongst others, the:

  • 1979 - 1984 Volkswagen Scirocco 1500 S - 1457 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Scirocco 1500

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Polo 1050

Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Polo 1050

Service kit for the Pierburg 36 1 B1 carburetor as used on, amongst others, the:

  • Volkswagen Polo 1050 - 1043 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Polo 1050

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Opel Kadett E 1300 N

Service Kit for Pierburg 36 1B1 carburetors for Opel Kadett E 1300 N

Service kit for the Pierburg 36 1B1 carburetor as used, amongst others, on the:

  • 1297 cc Opel Kadett E 1300 N

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B1 carburetors for Opel Kadett E 1300 N

PMS170
Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Passat 1600

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Passat 1600

Service kit for the Pierburg 36 1 B3 carburetor as used on, amongst others, the:

  • 1979 - 1983 Volkswagen Passat 1600 - 1588 cc
  • 1979 - 1983 Volkswagen Passat 1600 Automatic - 1588 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Passat 1600

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Vauxhall Nova 1300 L

Service Kit for Pierburg 36 1B1 carburetors for Vauxhall Nova 1300 L

Service kit for the Pierburg 36 1B1 carburetor as used, amongst others, on the:

  • 1297 cc Vauxhall Nova 1300 L

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B1 carburetors for Vauxhall Nova 1300 L

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Opel Rekord E 1800 S & 1800 N

Service Kit for Pierburg 36 1B1 carburetors for Opel Rekord E 1800 S & 1800 N

Service kit for the Pierburg 36 1B1 carburetor as used, amongst others, on the:

  • 1796 cc Opel Rekord E 1800 N & S

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B1 carburetors for Opel Rekord E 1800 S & 1800 N

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Opel Corsa 1200 and 1300 SR

Service Kit for Pierburg 36 1B1 carburetors for Opel Corsa 1200 and 1300 SR

Service kit for the Pierburg 36 1B1 carburetor as used, amongst others, on the:

  • 1196 cc Opel Corsa 1200
  • 1297 cc Opel Corsa 1300 SR

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B1 carburetors for Opel Corsa 1200 and 1300 SR

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Opel Manta B 1600

Service Kit for Pierburg 36 1B1 carburetors for Opel Manta B 1600

Service kit for the Pierburg 36 1B1 carburetor as used, amongst others, on the:

  • 1584 cc Opel Manta 1600 N & S, B-generation.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B1 carburetors for Opel Manta B 1600

PMS170
Service Kit for Pierburg 36 1B1 and 1B3 carburetors for Audi 80

Service Kit for Pierburg 36 1B1 and 1B3 carburetors for Audi 80

Service kit for the Pierburg 36 1B1 and 1B3 carburetor as used on:

  • 1979 - 1983 Audi 80 GL, S & L 1300 - 1272 cc
  • 1979 - 1983 Audi 80 GL, S & L 1500 - 1588 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B1 and 1B3 carburetors for Audi 80

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Opel Ascona C 1600

Service Kit for Pierburg 36 1B1 carburetors for Opel Ascona C 1600

Service kit for the Pierburg 36 1B1 carburetor as used, amongst others, on the:

  • 1584 cc Opel Ascona 1600 N & S, C-generation.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B1 carburetors for Opel Ascona C 1600

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Bedford Astra

Service Kit for Pierburg 36 1B1 carburetors for Bedford Astra

Service kit for the Pierburg 36 1B1 carburetor as used on the Bedford Astra Van 4WD - 1297 cc.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B1 carburetors for Bedford Astra

PMS170
Service Kit for Pierburg 36 1B3 carburetors for Mercedes L410 - L601 - L602 - L611

Service Kit for Pierburg 36 1B3 carburetors for Mercedes L410 - L601 - L602 - L611

Service kit for the Pierburg 36 1B3 carburetor as used on the 2307 cc Mercedes-Benz L410 - L601 - L602 - L611.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B3 carburetors for Mercedes L410 - L601 - L602 - L611

PMS170
Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Golf 1500

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Golf 1500

Newly arrived Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Golf

Service kit for the Pierburg 36 1 B3 carburetor as used on, amongst others, the:

  • Volkswagen Golf 1500 S, LS and GLS - 1457 cc.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets
  • "Enrichment Valve" diaphragm
  • Needle Valve needle
  • All required rubber (Viton) o-rings
  • Various others parts as visible in the picture

This is a Carburetor City carburetor service kit.

Service Kit for Pierburg 36 1B3 carburetors for Volkswagen Golf 1500

PMS170
Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Passat 1300

Service Kit for Pierburg 36 1B1 carburetors for Volkswagen Passat 1300

Service kit for the Pierburg 36 1 B1 carburetor as used on, amongst others, the:

  • Volkswagen Passat 1300 (A Motor) - 1272 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

This set contains the following parts:

  • All required gaskets