Dellorto SHB and SHBC Carburetor Parts
Dellorto SHB and SHBC Carburetor Parts

Dellorto SHB and SHBC Parts

Dellorto SHB and SHBC Carburetor Parts.

On this page you will find all currently available parts for the Dellorto SHB and SHBC range of carburettors.

Click HERE for an exploded view drawing of the Dellorto SHB and SHBC.

The numbers in the drawing correspond to the numbers in brackets at the beginning of the article description.

We are still very much expanding our parts offerings for these carburettors so please contact us by email if the part that you are looking for is not yet listed.

Dellorto SHB and SHBC Carburetor Parts

!
1486
(2) Main Jet for Dellorto SHB and SHBC carburetors

(2) Main Jet for Dellorto SHB and SHBC carburetors

Factory original main jet for the Dellorto SHB and SHBC carburetors.

We only supply original Dellorto jets, marked with the famous diamond-shaped "Inc" logo.

Available from our stock in sizes:

  • 33
  • 35
  • 40
  • 45
  • 48
  • 50
  • 53
  • 55
  • 58
  • 60
  • 62
  • 65
  • 67
  • 72
  • 80
  • 82
  • 84
  • 86
  • 88
  • 90
  • 118
  • 120

Most other sizes are available on special order. Please contact us by email with your exact requirements.

Required quantity per carburettor: 1

This is item number 2 in the drawing.

(2) Main Jet for Dellorto SHB and SHBC carburetors

6217
(5) Choke Jet for Dellorto SHB and SHBC carburetors

(5) Choke Jet for Dellorto SHB and SHBC carburetors

Choke jet for the Dellorto SHB and SHBC carburetors.

We only supply original Dellorto jets, marked with the famous diamond-shaped "Inc" logo.

Available in size:

  • 40
  • 50
  • 55
  • 60
  • 65
  • 70
  • 75
  • 120

Required quantity per carburettor: 1

This is item number 5 in the drawing.

(5) Choke Jet for Dellorto SHB and SHBC carburetors

4568
(24) Long Fuel Banjo Bolt for Dellorto SHB and SHBC carburetors

(24) Long Fuel Banjo Bolt for Dellorto SHB and SHBC carburetors

Fuel banjo bolt for the Dellorto SHB and SHBC carburetors with 8 mm pipe fitting banjos only.

This bolt has an overall length of some 21 mm with a shaft length of approximately 17.5 mm and will NOT fit the banjos for 6 mm fuel lines.

Required quantity per carburettor: 1

This is item number 24 in the drawing.

 

(24) Long Fuel Banjo Bolt for Dellorto SHB and SHBC carburetors

4052
(25) Banjo Bolt Fiber Washer for Dellorto SHB and SHBC carburetors

(25) Banjo Bolt Fiber Washer for Dellorto SHB and SHBC carburetors

Banjo bolt fiber washer for the Dellorto SHB and SHBC carburetors.

Required quantity per carburettor: 1

This is item number 25 in the drawing.

 

(25) Banjo Bolt Fiber Washer for Dellorto SHB and SHBC carburetors

6517
(26) Fuel Inlet Banjo - 8 mm - Angled - for Dellorto SHB and SHBC carburetors

(26) Fuel Inlet Banjo - 8 mm - Angled - for Dellorto SHB and SHBC carburetors

Special, angled, fuel inlet banjo to fit the Dellorto SHBC and SHB carburetors.

This banjo is suitable for fuel lines with an internal diameter of 8 mm.

The connection is angled at 45 degrees, as visible in the picture.

Required quantity per carburettor: 1

This is item number 26 in the drawing.

(26) Fuel Inlet Banjo - 8 mm - Angled - for Dellorto SHB and SHBC carburetors

6109
(27) Banjo Fuel Filter for Dellorto SHBC and SHB carburetors

(27) Banjo Fuel Filter for Dellorto SHBC and SHB carburetors

Special fuel filter to fit the banjo fuel bolt of the Dellorto SHBC and SHB carburetors.

Required quantity per carburettor: 1

This is item number 27 in the drawing.

 

(27) Banjo Fuel Filter for Dellorto SHBC and SHB carburetors

2838
(34) Needle Valve for Dellorto SHB and SHBC carburetors

(34) Needle Valve for Dellorto SHB and SHBC carburetors

Genuine Dellorto, viton-tipped, needle valve for the Dellorto SHBC and SHB carburetors.

This is the solid brass version with, of course, the famous red Viton tip for perfect sealing properties.

Required quantity per carburettor: 1

This is item number 34 in the drawing.

 

 

(34) Needle Valve for Dellorto SHB and SHBC carburetors

4560
(37) Float Pivot Pin for Dellorto SHB and SHBC carburetors

(37) Float Pivot Pin for Dellorto SHB and SHBC carburetors

Pivot pin for the float of the SHBC and SHB carburetors.

Required quantity per carburettor: 1

This is item number 37 in the drawing.

 

 

 

(37) Float Pivot Pin for Dellorto SHB and SHBC carburetors

52543
(42) Service Kit for Dellorto SHB carburetors

(42) Service Kit for Dellorto SHB carburetors

Dellorto factory-original service kit for the Dellorto SHB carburetors.

Contains all required gaskets, seals and o-rings.

Required quantity per carburetor: 1

This is item number 42 in the drawing.

 

(42) Service Kit for Dellorto SHB carburetors

52541
(42) Service Kit for Dellorto SHB 16 carburetors

(42) Service Kit for Dellorto SHB 16 carburetors

Dellorto factory-original service kit for the Dellorto SHB 16 carburetors.

Fits the versions with suffix F, G, H, L and M.
You will find the suffix casted in the carburettor's body.

Contains all required gaskets, seals and o-rings as seen in the picture.

Required quantity per carburetor: 1

This is item number 42 in the drawing.

(42) Service Kit for Dellorto SHB 16 carburetors

52516
(42) Service Kit for Dellorto SHBC carburetors with Metal Cover

(42) Service Kit for Dellorto SHBC carburetors with Metal Cover

Dellorto factory-original service kit for the Dellorto SHBC carburetors.

Contains all required gaskets, seals and o-rings.

Please note that this service kit is suitable for carburetors with a metal top cover.

Required quantity per carburetor: 1

This is item number 42 in the drawing.

(42) Service Kit for Dellorto SHBC carburetors with Metal Cover

52553
(42) Service Kit for Dellorto SHBC carburetors with Plastic Cover

(42) Service Kit for Dellorto SHBC carburetors with Plastic Cover

Dellorto factory-original service kit for the Dellorto SHBC carburetors.

Contains all required gaskets, seals and o-rings.

Please note that this service kit is suitable for carburetors with a plastic top cover.

Required quantity per carburetor: 1

This is item number 42 in the drawing.

This service kit also serves as an alternative for 52541 Service Kit for Dellorto SHB 16 carburetors which is no longer produced by the factory.

(42) Service Kit for Dellorto SHBC carburetors with Plastic Cover

4957
(43) Spring washer for Dellorto SHB and SHBC carburetors

(43) Spring washer for Dellorto SHB and SHBC carburetors

Spring washer for Dellorto SHB and SHBC carburetors.

Required quantity per carburettor: 1

This is item number 43 in the drawing.

 

 

(43) Spring washer for Dellorto SHB and SHBC carburetors

flexoid5xa4
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.

Almost a "First Aid Kit" for the home mechanic!

This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.

You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.

The sheets are made of cellulose based, plasticised gelatin-impregnated material.

The sheets are of the following thickness:

  • 0.15MM
  • 0.25MM
  • 0.4MM
  • 0.8MM
  • 1.6MM

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

OWV
Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec Fuel Line One Way Valve

PRO805
Sytec Pro-Line in-line fuel filter - 8 mm

Sytec Pro-Line in-line fuel filter - 8 mm

In line fuel filter with cleanable / replaceable filter.

Suitable for 8 mm internal diameter fuel hoses.

Replacement filter elements are available HERE.

Chrome finish.

Toughened glass phial.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

Supplied with 2 Jubilee clips.

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

Sytec Pro-Line in-line fuel filter - 8 mm

PRO896
Replacement elements for Sytec in-line fuel filter

Replacement elements for Sytec in-line fuel filter

3 replacement elements for the Sytec Pro-Line in-line fuel filter.

Come complete with new rubber seals.

These elements fit our PRO804 and PRO805 Sytec in-line fuel filters.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

 

 

 

 

Replacement elements for Sytec in-line fuel filter

jet sizer
Carburettor Jet Gauges

Carburettor Jet Gauges

Calibrated gauges to measure jet sizes.

The perfect way to determine the exact size of jets, regardless of what is indicated on them.

Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.

With these gauges, you can still determine which size these jets are.

Indispensable when working on modified carburettors!

Two different sets available:

Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mm
Set 2: 16 gauges, ranging from 1,50 to 3,00 mm

Priced per set!

Carburettor Jet Gauges

JSG01
Jet size gauge 0.5 to 1.5 mm

Jet size gauge 0.5 to 1.5 mm

Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.

Measurements are taken by inserting the tapered needle into the jet.

The size can then directly be read from the scale.

 

 

 

Jet size gauge 0.5 to 1.5 mm

JDK01
54-Piece Jet Drill Set

54-Piece Jet Drill Set

Jet drill set comprising 50 jet drills and and 4 pin vises.

The perfect way to fine-tune any jet to suit your needs.

Also highly suited to clean clogged-up jets.

The set contains:

  • 4 pin vises to suit all drill sizes included
  • 10 drills ranging from 1,0 to 2,0 mm:
    1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.7, 1.8, 1.9 & 2.0 mm
  • 20 drills ranging is size from 0.3 mm to 1.6 mm:
    0.3, 0.35, 0.4, 0.45, 0.50, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 & 1.6 mm
  • 20 x drills Gauge Number 80 to 61 (0.343 to 0.991 mm / 0.0135 to 0.0390 inches )

54-Piece Jet Drill Set

JET REAMER
16-Piece Jet Reamer Set

16-Piece Jet Reamer Set

Jet reamer kit comprising 16 reamers and and a pin vise.

The perfect way to fine-tune any jet to suit your needs.

The set contains:

  • 1 pin vise to suit all reamer sizes in this set
  • 1 storage case
  • 16 reamers ranging is size from 0.33 mm to 2.00 mm:
    0.33; 0.40; 0.45; 0.50; 0.60; 0.70; 0.75; 0.80; 0.90; 1.00; 1.10; 1.20; 1.40; 1.60; 1.80; 2.00 mm

16-Piece Jet Reamer Set

G4074
Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit.

The Tune-up plug for Petrol / LPG 2 and 4 stroke engines with single, twin or multiple carburettors or fuel injection systems.

The original and best tool for seeing what's happening inside the combustion chamber of the petrol engine.

It allows you to see the combustion and to adjust the mixture by color.

Fits most petrol engines in standard form with additional adapters available for vehicles with alternative sized spark plugs.

Additional Information

  • Kit includes: 14mm Short reach plug and Hexagonal adapter
  • Colortune will fit most vehicles
  • Kit complete with instructions in English
  • Extra adapter sizes available separately

Available in the following basic sizes:

  • 10 mm - Available from our Stock
  • 12 mm - Sold out at the moment !
  • 14 mm - Available from our Stock

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Colortune See Through Spark Plug Kit

Available as long as our limited stock lasts!

Patch
Dellorto Carburatori Sew-On Patch

Dellorto Carburatori Sew-On Patch

Official issue sew-on patch with the Dellorto logo and Italian flag "tricolore" colors.

Measures 12 x 6.5 cm (4.7 x 2.6 inches).

Elaborately embroidered.

 

 

Dellorto Carburatori Sew-On Patch

DD0905
Dellorto Carburatori Sticker - Small

Dellorto Carburatori Sticker - Small

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 6 x 3 cm (2.4 x 1.2 inches).

Made of high quality vinyl.

 

 

Dellorto Carburatori Sticker - Small

DD0909
Dellorto Carburatori Sticker - Medium

Dellorto Carburatori Sticker - Medium

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 8 x 4 cm (3.1 x 1.55 inches).

Made of high quality vinyl.

 

 

Dellorto Carburatori Sticker - Medium

DD0906
Dellorto Carburatori Sticker - Large

Dellorto Carburatori Sticker - Large

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 10 x 5 cm (3.9 x 1.95 inches).

Made of high quality vinyl.

 

 

Dellorto Carburatori Sticker - Large