Dellorto VHSH Carburetor Parts
Dellorto VHSH Carburetor Parts

Dellorto VHSH Parts

Dellorto VHSH Carburetor Parts.

On this page you will find all currently available parts for the Dellorto VHSH range carburettors.

Click HERE for an exploded view drawing of the Dellorto VHSH.

The numbers in the drawing correspond to the numbers in brackets at the beginning of the article description.

Click HERE for the specifications of the K and U series needles used on these carburettors.

Please follow THESE instructions on how to replace an atomizer bush on these carburettors.

We are still very much expanding our parts offerings for these carburettors so please contact us by email if the part that you are looking for is not yet listed.

Dellorto VHSH Carburetor Parts

!
14356
4mm Needle Jet / Atomiser Bush for Dellorto VHSH carburetors

4mm Needle Jet / Atomiser Bush for Dellorto VHSH carburetors

Atomiser Bush for Dellorto VHSH series carburetors.

This is the version with a 4 mm raised, closed, shroud.

Required quantity per carburettor: 1

This item is NOT shown the drawing.

Please follow THESE instructions on how to replace an atomiser bush on these carburettors.

4mm Needle Jet / Atomiser Bush for Dellorto VHSH carburetors

15998
8mm Needle Jet / Atomiser Bush for Dellorto VHSH carburetors

8mm Needle Jet / Atomiser Bush for Dellorto VHSH carburetors

Atomiser Bush for Dellorto VHSH serie carburetors.

This is the version with a 8 mm raised, open, shroud.

Required quantity per carburettor: 1

This item is NOT shown the drawing.

Please follow THESE instructions on how to replace an atomiser bush on these carburettors.

8mm Needle Jet / Atomiser Bush for Dellorto VHSH carburetors

Please note:
This article is currently on order from the manufacturer.
We expect the new supply to arrive at our warehouse by April 26, 2017.
If you don't want to miss out on it, feel free to place your order now.
Payment is not required until we have your shipment ready to go for you.

8530
(2) K Series needle for Dellorto VHSH carburetors

(2) K Series needle for Dellorto VHSH carburetors

K-series needle for the Dellorto VHSH carburetors.

We only supply original Dellorto needles, marked with the famous diamond-shaped "Inc" logo.

In stock in version:

  • K1
  • K2
  • K3
  • K4
  • K9
  • K13
  • K31
  • K51

Can be supplied in virtually any other version but please contact us by email for that.

Required quantity per carburettor: 1

This is item number 2 in the drawing.

Click HERE for the specifications of the K and U series needles used on these carburettors.

(2) K Series needle for Dellorto VHSH carburetors

12539
(3) DP Series Atomiser for Dellorto VHSH carburetors

(3) DP Series Atomiser for Dellorto VHSH carburetors

DP-series Atomiser for the Dellorto VHSH carburetors.

We only supply original Dellorto needles, marked with the famous diamond-shaped "Inc" logo.

This is typically a two-stroke atomiser.

In stock in version:

  • DP268

Please contact us for virtually ant other version of this atomiser.

Required quantity per carburettor: 1

This is item number 3 in the drawing.

(3) DP Series Atomiser for Dellorto VHSH carburetors

6413
(6) Main jet for Dellorto VHSH carburetors

(6) Main jet for Dellorto VHSH carburetors

Main jet for the Dellorto VHSH carburetors.

We only supply original Dellorto jets, marked with the famous diamond-shaped "Inc" logo.

In stock in sizes:

  • 52
  • 54
  • 56
  • 58
  • 60
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 105
  • 108
  • 110
  • 115
  • 118
  • 120
  • 125
  • 130
  • 135
  • 140
  • 145
  • 150
  • 155
  • 160
  • 165
  • 170
  • 172
  • 175
  • 180
  • 182
  • 185
  • 190
  • 195
  • 200
  • 205
  • 210

Please contact us by email if you require other size(s).

Required quantity per carburettor: 1

This is item number 6 in the drawing.

(6) Main jet for Dellorto VHSH carburetors

6217
(7) Choke Jet for Dellorto VHSH carburetors

(7) Choke Jet for Dellorto VHSH carburetors

Choke jet for the Dellorto VHSH carburetors.

We only supply original Dellorto jets, marked with the famous diamond-shaped "Inc" logo.

Available in size:

  • 40
  • 50
  • 55
  • 60
  • 65
  • 70
  • 75
  • 120

Required quantity per carburettor: 1

This is item number 7 in the drawing.

(7) Choke Jet for Dellorto VHSH carburetors

NV
(8) Genuine Viton-Tipped Needle Valve Assembly for Dellorto VHSH carburetors

(8) Genuine Viton-Tipped Needle Valve Assembly for Dellorto VHSH carburetors

Dellorto needle valve, seat and fiber washer for the VHSH carburetors.

Genuine Dellorto part, Viton-tipped!

Only genuine Dellorto needles are marked with the diamond shaped "Inc" logo!

Available in size:

  • 150
  • 170
  • 200
  • 225
  • 250
  • 270
  • 300
  • 350
  • 400

Required quantity per carburettor: 1

This is item number 8 in the drawing.

(8) Genuine Viton-Tipped Needle Valve Assembly for Dellorto VHSH carburetors

9794
(9) Single black plastic float for Dellorto VHSH carburetors

(9) Single black plastic float for Dellorto VHSH carburetors

Single, black plastic, float for the Dellorto VHSH carburetors.

Available in the following versions:

  • 9794.1 - 3.5 gram
  • 9794.3 - 3.5 gram
  • 9794.4 - 4.5 gram
  • 9794.5 - 2.8 gram

Required quantity per carburettor: 2

This is item number B 9 in the drawing.

(9) Single black plastic float for Dellorto VHSH carburetors

15760
(11) Single white plastic float for Dellorto VHSH carburetors

(11) Single white plastic float for Dellorto VHSH carburetors

Single, white plastic, float for the Dellorto VHSH carburetors.

Available in the following versions:

  • 15760.3 - 4.0 grams
  • 15760.4 - 5.2 grams
  • 15760.5 - 3.6 grams

Required quantity per carburettor: 2

This is item number B 11 in the drawing.

(11) Single white plastic float for Dellorto VHSH carburetors

1476A
(12) Rubber Cable Boot for Dellorto VHSH carburetors

(12) Rubber Cable Boot for Dellorto VHSH carburetors

Rubber cable cap for the Dellorto VHSH carburetors.

Required quantity per carburettor: 1

This is item number 12 in the drawing.

 

 

(12) Rubber Cable Boot for Dellorto VHSH carburetors

1481
(13) Cable Adjuster for Dellorto VHSH carburetors

(13) Cable Adjuster for Dellorto VHSH carburetors

Cable adjuster for the Dellorto VHSH carburetors.

Fits an outer cable with an external diameter of 6.75 mm.

This cable adjuster uses Lock Nut 1692 to secure its setting.
For your convenience, you can order this lock nut right along with this adjuster by simply selecting it through the drop box above.

Required quantity per carburettor: 1

This is part of item number 13 in the drawing.

 

(13) Cable Adjuster for Dellorto VHSH carburetors

1692
(13) Lock nut for Cable Adjuster on Dellorto VHSH carburetors

(13) Lock nut for Cable Adjuster on Dellorto VHSH carburetors

This is the locknut that secures the setting on the throttle cable for the Dellorto VHSH carburetors.

Required quantity per carburettor: 1

This is part of item number 13 in the drawing.

 

(13) Lock nut for Cable Adjuster on Dellorto VHSH carburetors

9596
(20) Needle Circlip for Dellorto VHSH carburetors

(20) Needle Circlip for Dellorto VHSH carburetors

Circlip to secure the needle on the Dellorto VHSH carburetors.

Required quantity per carburettor: 1

This is item number 20 in the drawing.

 

 

(20) Needle Circlip for Dellorto VHSH carburetors

8294
(22) Lever-Operated Choke Mechanism for Dellorto VHSH carburetors - Short

(22) Lever-Operated Choke Mechanism for Dellorto VHSH carburetors - Short

Lever-operated choke mechanism for Dellorto VHSH carburetors.

Please note that the working height of this version is 34 mm.

Please make sure that this is the correct version for your carburetor.

Required quantity per carburettor: 1

This is item number 22 in the drawing.

(22) Lever-Operated Choke Mechanism for Dellorto VHSH carburetors - Short

8297
(23) O Ring for Choke Assembly on Dellorto VHSH carburetors

(23) O Ring for Choke Assembly on Dellorto VHSH carburetors

Rubber (Viton) o-ring to seal the choke assembly on the Dellorto VHSH series carburetors.

Required quantity per carburettor: 1

This is item number 23 in the drawing.

 

 

(23) O Ring for Choke Assembly on Dellorto VHSH carburetors

7446
(24) Mixture Screw Spring for Dellorto VHSH carburetors

(24) Mixture Screw Spring for Dellorto VHSH carburetors

Mixture Screw Spring for Dellorto VHSH carburetors.

This spring secures the setting of the mixture screw on these carburetors.

Required quantity per carburettor: 1

This is item number 24 in the drawing.

 

 

(24) Mixture Screw Spring for Dellorto VHSH carburetors

3445
(26) Fuel Filter Fiber Washer for Dellorto VHSH carburetors

(26) Fuel Filter Fiber Washer for Dellorto VHSH carburetors

Fiber washer to seal the fuel filter bolt on the Dellorto VHSH carburetors.

Required quantity per carburettor: 1

This is item number 26 in the drawing.

 

 

(26) Fuel Filter Fiber Washer for Dellorto VHSH carburetors

6288
(27) Fiber Ring for the Needle Valve on the Dellorto VHSH carburetors

(27) Fiber Ring for the Needle Valve on the Dellorto VHSH carburetors

Fiber ring to seal the needle valve on the Dellorto VHSH carburetors.

Required quantity per carburettor: 1

This is item number 27 in the drawing.

 

 

(27) Fiber Ring for the Needle Valve on the Dellorto VHSH carburetors

12546
(28) Main jet Anti-Surge Washer for Dellorto VHSH carburetors

(28) Main jet Anti-Surge Washer for Dellorto VHSH carburetors

Special anti-surge washer for the main jet on the Dellorto VHSH carburetors.

Required quantity per carburettor: 1

This is item number 28 in the drawing.

 

 

 

(28) Main jet Anti-Surge Washer for Dellorto VHSH carburetors

10544
(30) Float Arm for Dellorto VHSH carburetors

(30) Float Arm for Dellorto VHSH carburetors

Float arm for the single, plastic, floats as used in the Dellorto VHSH carburetors.

Suitable for:

Required quantity per carburettor: 1

This is item number 30 in the drawing.

(30) Float Arm for Dellorto VHSH carburetors

12693
(31) Float Bowl Gasket for Dellorto VHSH carburetors

(31) Float Bowl Gasket for Dellorto VHSH carburetors

Float bowl gasket for the Dellorto VHSH carburetors.

Fits all varieties of float bowl for these carburettors.

Required quantity per carburettor: 1

This is item number 26 in the drawing.

 

 

 

(31) Float Bowl Gasket for Dellorto VHSH carburetors

14415
(35) Float Bowl for Dellorto VHSH carburetors

(35) Float Bowl for Dellorto VHSH carburetors

Deep, "Aprilia"-style, float bowl for the Dellorto VHSH carburetors for versions with individual floats.

Please note:
Originally, there were 4 different versions on this float bowl (see drawing HERE).
Only a limited number of these 4 are still available from Dellorto.
If you are unsure if this is the correct float bowl for your carburettor, please don't hesitate to contact us for advice.

Required quantity per carburettor: 1

This is item number B3 35 in the drawing.

(35) Float Bowl for Dellorto VHSH carburetors

4957
(36) Spring Washer for Dellorto VHSH carburetors

(36) Spring Washer for Dellorto VHSH carburetors

Spring Washer for the float bowl on the Dellorto VHSH carburetors.

Required number per carburettor: 2

This is item number 36 in the drawing.

 

 

(36) Spring Washer for Dellorto VHSH carburetors

52611
(41) Service Kit for Dellorto VHSH carburetors

(41) Service Kit for Dellorto VHSH carburetors

Dellorto factory-original service kit for the Dellorto VHSH carburetors.

Contains all required gaskets, seals and o-rings.

Also suitable for the Dellorto VHSA series.

Required quantity per carburetor: 1

This is item number 41 in the drawing.

(41) Service Kit for Dellorto VHSH carburetors

9008
Breather Pipe Connection for Dellorto VHSH carburetors

Breather Pipe Connection for Dellorto VHSH carburetors

This breather pipe connector will fit a wide range of Dellorto carburetors, amongst which the VHSH series.

This pipe has 5 mm push fit in the carburettor body and connects to a 3.8 mm internal diameter breather line.

Required quantity per carburettor: 1

This item is NOT shown in the drawing.

Breather Pipe Connection for Dellorto VHSH carburetors

flexoid5xa4
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.

Almost a "First Aid Kit" for the home mechanic!

This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.

You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.

The sheets are made of cellulose based, plasticised gelatin-impregnated material.

The sheets are of the following thickness:

  • 0.15MM
  • 0.25MM
  • 0.4MM
  • 0.8MM
  • 1.6MM

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

OWV
Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec Fuel Line One Way Valve

PRO805
Sytec Pro-Line in-line fuel filter - 8 mm

Sytec Pro-Line in-line fuel filter - 8 mm

In line fuel filter with cleanable / replaceable filter.

Suitable for 8 mm internal diameter fuel hoses.

Replacement filter elements are available HERE.

Chrome finish.

Toughened glass phial.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

Supplied with 2 Jubilee clips.

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

Sytec Pro-Line in-line fuel filter - 8 mm

PRO896
Replacement elements for Sytec in-line fuel filter

Replacement elements for Sytec in-line fuel filter

3 replacement elements for the Sytec Pro-Line in-line fuel filter.

Come complete with new rubber seals.

These elements fit our PRO804 and PRO805 Sytec in-line fuel filters.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

 

 

 

 

Replacement elements for Sytec in-line fuel filter

jet sizer
Carburettor Jet Gauges

Carburettor Jet Gauges

Calibrated gauges to measure jet sizes.

The perfect way to determine the exact size of jets, regardless of what is indicated on them.

Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.

With these gauges, you can still determine which size these jets are.

Indispensable when working on modified carburettors!

Two different sets available:

Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mm
Set 2: 16 gauges, ranging from 1,50 to 3,00 mm

Priced per set!

Carburettor Jet Gauges

JSG01
Jet size gauge 0.5 to 1.5 mm

Jet size gauge 0.5 to 1.5 mm

Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.

Measurements are taken by inserting the tapered needle into the jet.

The size can then directly be read from the scale.

 

 

 

Jet size gauge 0.5 to 1.5 mm

JDK01
54-Piece Jet Drill Set

54-Piece Jet Drill Set

Jet drill set comprising 50 jet drills and and 4 pin vises.

The perfect way to fine-tune any jet to suit your needs.

Also highly suited to clean clogged-up jets.

The set contains:

  • 4 pin vises to suit all drill sizes included
  • 10 drills ranging from 1,0 to 2,0 mm:
    1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.7, 1.8, 1.9 & 2.0 mm
  • 20 drills ranging is size from 0.3 mm to 1.6 mm:
    0.3, 0.35, 0.4, 0.45, 0.50, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 & 1.6 mm
  • 20 x drills Gauge Number 80 to 61 (0.343 to 0.991 mm / 0.0135 to 0.0390 inches )

54-Piece Jet Drill Set

JET REAMER
16-Piece Jet Reamer Set

16-Piece Jet Reamer Set

Jet reamer kit comprising 16 reamers and and a pin vise.

The perfect way to fine-tune any jet to suit your needs.

The set contains:

  • 1 pin vise to suit all reamer sizes in this set
  • 1 storage case
  • 16 reamers ranging is size from 0.33 mm to 2.00 mm:
    0.33; 0.40; 0.45; 0.50; 0.60; 0.70; 0.75; 0.80; 0.90; 1.00; 1.10; 1.20; 1.40; 1.60; 1.80; 2.00 mm

16-Piece Jet Reamer Set

G4074
Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit.

The Tune-up plug for Petrol or LPG, 2 and 4 stroke engines with single, twin or multiple carburettors or fuel injection systems.

The original and best tool for seeing what's happening inside the combustion chamber of the petrol engine.

It allows you to see the combustion and to adjust the mixture by color.

Fits most petrol engines in standard form with additional adapters available for vehicles with alternative sized spark plugs.

Kit includes:

  • See-Through Spark Plug
  • Hexagonal adapter for spark plug wrench
  • Copper sealing washer
  • Extension Cord
  • Extension tube with mirror
  • Cleaning brush
  • Instructions in English

Colortune will fit most vehicles.

Extra adapter sizes available separately

Available in the following basic thread sizes:

  • 10 mm
  • 12 mm
  • 14 mm

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Colortune See Through Spark Plug Kit

Available from our Stock

DD0906
Dellorto Carburatori Sticker - Large

Dellorto Carburatori Sticker - Large

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 9 x 3 cm (3.54 x 1.2 inches).

This is Number 1 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Large

DD0909
Dellorto Carburatori Sticker - Medium

Dellorto Carburatori Sticker - Medium

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 8 x 4 cm (3.1 x 1.55 inches).

This is Number 2 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Medium

DD0905
Dellorto Carburatori Sticker - Small - Low

Dellorto Carburatori Sticker - Small - Low

Official issue sticker / decal with the Dellorto logo and Italian flag "tricolore" colors.

Measures 6 x 2 cm (2.4 x 0.8 inches).

This is Number 3 in the photograph.

Made of high quality vinyl.

 

 

 

Dellorto Carburatori Sticker - Small - Low

Patch
Dellorto Carburatori Sew-On Patch

Dellorto Carburatori Sew-On Patch

Official issue sew-on patch with the Dellorto logo and Italian flag "tricolore" colors.

Measures 12 x 6.5 cm (4.7 x 2.6 inches).

Elaborately embroidered.

 

 

Dellorto Carburatori Sew-On Patch