Misab Sweden Fuel Technology Products
Misab Sweden Fuel Technology Products

Misab Sweden

On this page you will find Misab Sweden Fuel Technology Products.

The Swedish Misab company produces a number of carburetor mounting material amongst which the famous "Misab Plates" and the "Cosworth Buffers".

 

Misab Sweden Fuel Technology Products

!
cosx4
Cosworth Carburettor Mounts - carburetor to manifold

Cosworth Carburettor Mounts - carburetor to manifold

Developed by British-based racing engineers Cosworth, these buffers are specifically designed to be used in conjunction with Misab-plates.

Nowadays produced by that same Misab company from Sweden, the mounts are strong enough to ensure an airtight seal while also providing enough vibration damping.

Each mount consists of two cups and one rubber buffer.

Install the Misab-plates, install your carb(s), install the Cosworth mounts using a Nyloc nut (NOT included in the standard set!) and set the distance between the cups to 2 millimeter, using a normal feeler gauge.
The buffer is now set to the correct tension to dampen vibrations but not allowing air leaks.

These mounts are supplied in sets of 4 complete mounts (as depicted) which is enough for one carburettor like a Dellorto DHLA, Solex ADDHE, Weber DCOM or Weber DCOE.

Note:
Following many requests from our customers, we have sourced superior quality stainless steel locking nuts in size M8 which is the most common size used on carburetor studs.

For your convenience, you can select these from the drop box and order them right along with the buffers but please verify that your studs have that same, M8, thread.

Cosworth Carburettor Mounts - carburetor to manifold

misabx2
Original Misab Plates carburetor mounts

Original Misab Plates carburetor mounts

Developed by MIS AB in Sweden, these mounts are specifically designed to be used in conjunction with the Cosworth buffer mounts.

These plates ensure ensure an airtight seal between carburettor and manifold, thanks to their vulcanized rubber ring.

For the best result, we strongly advise the combination with the Cosworth buffer mounts.

Install the Misab-plates, install your carb(s), install the Cosworth mounts using a Nyloc nut (NOT included in the standard set!) and set the distance between the cups to 2 millimeter, using a normal feeler gauge.
The buffer is now set to the correct tension to dampen vibrations but not allowing air leaks.

These MISAB plates are supplied in sets of 2 which is enough for one carburettor like a Dellorto DHLA, Solex ADDHE, Weber DCOM or Weber DCOE.

For your convenience you can order the Cosworth buffer mounts and high quality Stainless Steel Self-Locking M8 nuts right along with it.

Original Misab Plates carburetor mounts

51730.080
4 x Stainless Steel Self-Locking Nuts in size M8

4 x Stainless Steel Self-Locking Nuts in size M8

Following many requests from our customers, we have sourced superior quality stainless steel locking nuts in size M8 which is the most common size used on carburetor studs.

These are commonly used to secure double-barrel, horizontal, carburetors like Dellorto DHLA, Weber DCOE and Solex ADDHE to the studs in their manifolds.

Please verify that your studs have that same, M8, thread.

We sell these nuts in sets of 4.

4 x Stainless Steel Self-Locking Nuts in size M8