Carburettor Tools Shop.
On this page you will find the various tools that we have available that make working on and working with carburettors a little easier.
Carburettor Tools Shop
Special Tool for tuning the Stromberg 175 CD carburetors.
A vital tool for both the DIY mechanic as well as professionals!
Special Tool for Stromberg 175 CD Carburetors
Gunson Colortune See Through Spark Plug Kit.
The Tune-up plug for Petrol or LPG, 2 and 4 stroke engines with single, twin or multiple carburettors or fuel injection systems.
The original and best tool for seeing what's happening inside the combustion chamber of the petrol engine.
It allows you to see the combustion and to adjust the mixture by color.
Fits most petrol engines in standard form with additional adapters available for vehicles with alternative sized spark plugs.
Colortune will fit most vehicles.
Extra adapter sizes available separately
Available in the following basic thread sizes:
For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.
Gunson Colortune See Through Spark Plug Kit
Available from our Stock
Gunson Car Balancer.
Internal combustion engines use a mixture of air and petrol to generate their power.
The performance therefore is influenced by the air flowing into it and the petrol that is metered out by the carburettor.
Unless the air flow in Twin or Multiple carburettors is correctly set, the correct mixture adjustment is unlikely to be achieved and this is the simplest tool to achieve that.
Suitable for use on SU, Solex, Auto-Lite (Fomoco), Stromberg, Weber and Zenith and can be adjusted to fit most carburettors including sidedraft, downdraft with air intakes (Venturi) from 25 mm to 67 mm (1”-2”) diameter
The user manual for the Gunson Carbalancer, in English, can be downloaded HERE.
Available from our stock, ready to be shipped.
Gunson Carbalancer Carburetor Synchronizing Tool
Anybody who regularly works on the DHLA and DRLA knows the problem of seized mixture screws.
Especially the later versions with the screws in "towers" are prone to seizing as the towers trap moisture and the bronze screws slowly seize in the Zamac carburetor body.
If you manage to remove the screws, this tap will help you to clean the thread in the body.
It will even repair slight damage.
Of course, it will not cut a thread in a completely stripped or overbored hole.
Please note that it is only suitable for the Dellorto DHLA and Dellorto DRLA versions that use mixture screws 9656 and 11068 as pictured below:
Mixture screw tap for Dellorto DHLA and DRLA carburetors
2 Column Manometer
The New Carbtune Pro - essential for balancing multiple carburettors.
Also suitable for car- and motorcycle engines which have the possibility of hooking up vacuum lines.
Replacement line can be found HERE.Replacement, brass, vacuum take-off can be found HERE.
2 Column Manometer - Synchrometer Carbtune Pro
* NOW REVAMPED WITH NYLON CARRYING BAG AND BRASS ADAPTERS! *
4 Column Manometer / Synchronometer.
This is the New Carbtune Pro, the essential tool for balancing multiple carburettors.
Replacement line can be found HERE.Replacement, brass, vacuum take-off adapters can be found HERE.
4 Column Manometer - Synchrometer Carbtune Pro
This is the top-of-the-line Cohline silicone vacuum hose / line.
Exceptionally well suited for use on the vacuum-advance of distributors.
Also suited as replacement or extension for your Manometer.
This line has a 3.5 mm inner diameter and circa 8 mm outer diameter.
It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).
When ordering multiple lengths, we will do our best to supply it as 1 piece.
Maximum, single, length: 5 meters.
Cohline Vacuum Hose with 3.5 mm inner diameter
Vacuum take-off adapter for Dellorto DHLA and PHF.
Vacuum take off adapter, will fit standard take off point of DHLA carburetors, DHLB carburettors, and PHF carburettors.
Also fits the Weber DCOE series carburettors and Solex ADDHE.
Brass vacuum take-off adapter for carburetors and manifolds
Synchrometer airflow meter for various carburetors.
Pushes into the trumpet / ram pipe / velocity stack or throat to measure the airflow to enable you to balance multiple carburettors.
Total length of unit 121mm
Rubber cone dimensions:Small end diameter 40mmLarge end diameter 55mmLength of cone 36mm
Synchrometer airflow meter for carburetors
Synchrometer adapter to suit Solex INAT and Zenith INAT carburettors.
Internal diameter: 135 mm.
Synchrometer Adapter for Solex and Zenith INAT Carburetors
Synchrometer adapter to suit Weber DCNF carburetors.
It measures approximately 43 mm outside diameter at carburettor end.
Synchrometer adapter for Weber DCNF carburetors
Synchrometer adapter to suit SU and Stromberg carburettors.
Cone dimensions: 30mm - 40mm.
Internal diameter of the hole through the middle: 25mm.
Synchrometer adaptor for SU carburettors
Synchrometer adapter to suit SU HD and SU HS8 carburetors.
Approximately 52 mm outside diameter at carburettor end.
Angled at 45 degrees.
42 mm internal diameter.
Synchrometer adapter for SU HD and HS8 carburetors
Rubber adapter hose to allow use of the Synchrometer in confined spaces.
Approx. overall length 150mm.
External diameter at carburetor end 40mm.
Internal diameter at Synchrometer end 43mm.
Synchrometer adapter elbow
Calibrated gauges to measure jet sizes.
The perfect way to determine the exact size of jets, regardless of what is indicated on them.
Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.
With these gauges, you can still determine which size these jets are.
Indispensable when working on modified carburettors!
Two different sets available:
Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mmSet 2: 16 gauges, ranging from 1,50 to 3,00 mm
Priced per set!
Carburettor Jet Gauges
Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.
Measurements are taken by inserting the tapered needle into the jet.
The size can then directly be read from the scale.
Jet size gauge 0.5 to 1.5 mm
Jet drill set comprising 50 jet drills and and 4 pin vises.
The perfect way to fine-tune any jet to suit your needs.
Also highly suited to clean clogged-up jets.
The set contains:
54-Piece Jet Drill Set
Jet reamer kit comprising 16 reamers and and a pin vise.
16-Piece Jet Reamer Set
ONLY A FEW SETS IN STOCK!
This is an absolutely ingenious tool for anybody working the side draught Solex ADDHE's!
With this set, you can measure exactly how much fuel the pump jet pump is delivering through the jets and adjust it where desired.
Gone are the days with your carbs in a vice and trying to catch and measure the fuel... this set can be used IN SITU on the car!
Set of 4 of these tools, enough for 2 sidedraught Solex ADDHE's.
Attention !These are New-Old-Stock sets dating from the 1970's.
Solex ADDHE Pump Tool
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.
Almost a "First Aid Kit" for the home mechanic!
This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.
You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.
The sheets are made of cellulose based, plasticised gelatin-impregnated material.
The sheets are of the following thickness:
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material
Set of 9 Hollow Punches for Gasket Material 2.5 - 10 mm.
An excellent addition to our our sets of gasket paper sheets!
This is a set of 9 different sizes, round, hollow punches to make perfectly round holes in you your home-made gaskets.
Simply put the gasket-to-be on a suitable surface, position the punch with care, hit it firmly with a hammer and there you go! A perfectly round hole in your gasket!
This set consists of punches in the following sizes:
Set of 9 Hollow Punches for Gasket Material 2.5 - 10 mm
Dellorto, Weber and Solex Carburettors Spare Parts Jets Chokes Emulsion Tubes Service Kits