Carburettor Fitting Materials
Carburettor Fitting Materials

Carburettor Fitting Materials

On this page you will find various fitting materials for your carburettors.

Carburettor Fitting Materials

!
cosx4
Cosworth Carburettor Mounts - carburetor to manifold

Cosworth Carburettor Mounts - carburetor to manifold

Developed by British-based racing engineers Cosworth, these buffers are specifically designed to be used in conjunction with Misab-plates.

Nowadays produced by that same Misab company from Sweden, the mounts are strong enough to ensure an airtight seal while also providing enough vibration damping.

Each mount consists of two cups and one rubber buffer.

Install the Misab-plates, install your carb(s), install the Cosworth mounts using a Nyloc nut (NOT included in the standard set!) and set the distance between the cups to 2 millimeter, using a normal feeler gauge.
The buffer is now set to the correct tension to dampen vibrations but not allowing air leaks.

These mounts are supplied in sets of 4 complete mounts (as depicted) which is enough for one carburettor like a Dellorto DHLA, Solex ADDHE, Weber DCOM or Weber DCOE.

Note:
Following many requests from our customers, we have sourced superior quality stainless steel locking nuts in size M8 which is the most common size used on carburetor studs.

For your convenience, you can select these from the drop box and order them right along with the buffers but please verify that your studs have that same, M8, thread.

Cosworth Carburettor Mounts - carburetor to manifold

misabx2
Original Misab Plates carburetor mounts

Original Misab Plates carburetor mounts

Developed by MIS AB in Sweden, these mounts are specifically designed to be used in conjunction with the Cosworth buffer mounts.

These plates ensure ensure an airtight seal between carburettor and manifold, thanks to their vulcanized rubber ring.

For the best result, we strongly advise the combination with the Cosworth buffer mounts.

Install the Misab-plates, install your carb(s), install the Cosworth mounts using a Nyloc nut (NOT included in the standard set!) and set the distance between the cups to 2 millimeter, using a normal feeler gauge.
The buffer is now set to the correct tension to dampen vibrations but not allowing air leaks.

These MISAB plates are supplied in sets of 2 which is enough for one carburettor like a Dellorto DHLA, Solex ADDHE, Weber DCOM or Weber DCOE.

For your convenience you can order the Cosworth buffer mounts and high quality Stainless Steel Self-Locking M8 nuts right along with it.

Original Misab Plates carburetor mounts

jubilee7-9
7 - 9 mm Stainless Steel Jubilee Clip Hose Clamp

7 - 9 mm Stainless Steel Jubilee Clip Hose Clamp

7 - 9 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 7 and 9 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

7 - 9 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee8-10
8 - 10 mm Stainless Steel Jubilee Clip Hose Clamp

8 - 10 mm Stainless Steel Jubilee Clip Hose Clamp

8 - 10 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 8 and 10 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

8 - 10 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee9-11
9 - 11 mm Stainless Steel Jubilee Clip Hose Clamp

9 - 11 mm Stainless Steel Jubilee Clip Hose Clamp

9 - 11 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 9 and 11 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

9 - 11 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee10-12
10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp for 6 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 6 mm internal diameter fuel line as well as our green "Italian Style" transparent fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 10 and 12 mm internal diameter (i.e. 10 - 12 mm external hose/line diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee11-13
11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp for 8 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 8 mm internal diameter fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 8 mm internal diameter (i.e. 11 - 13 mm external hose diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee12-14
12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp

12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp

12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 12 and 14 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee14-16
14 - 16 mm Stainless Steel Jubilee Clip Hose Clamp

14 - 16 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp 14 - 16 mm for 10 mm Flexible Fuel Line.

Neatly finished, this stainless steel (Grade 304) hose clamp (or jubilee clip if you want) is the perfect compliment to your fuel hose.

It is rated for between 14 and 16 mm external hose diameter with 10 mm internal diameter.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

14 - 16 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee15-17
15 - 17 mm Stainless Steel Jubilee Clip Hose Clamp

15 - 17 mm Stainless Steel Jubilee Clip Hose Clamp

15 - 17 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 15 - 17 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

15 - 17 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee16-18
16 - 18 mm Stainless Steel Jubilee Clip Hose Clamp

16 - 18 mm Stainless Steel Jubilee Clip Hose Clamp

16 - 18 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 16 and 18 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

16 - 18 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee15-27
15 - 27 mm Zinc-Plated Jubilee Clip Hose Clamp

15 - 27 mm Zinc-Plated Jubilee Clip Hose Clamp

Zinc Plated Jubilee Clip Hose Clamp 15 - 27 mm for 12 mm internal diameter Flexible Fuel Line.

Neatly finished, this zinc-plated hose clamp (or jubilee clip if you want) is the perfect compliment to your fuel hose.

It is rated for between 15 and 27 mm external hose diameter with 12 mm internal diameter.

Can be tightened using a 6 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

15 - 27 mm Zinc-Plated Jubilee Clip Hose Clamp

P8
Stainless Steel P Clips For 8 MM Hoses Tube Fuel Brake Pipe

Stainless Steel P Clips For 8 MM Hoses Tube Fuel Brake Pipe

P clips are used extensively in many industries for securing pipes, hoses and cables.

The snug fitting EPDM liner enables the clips to clamp the pipes, hoses and cables firmly without any possibility of chafing or damage to the surface of the component being clamped, and of course they can be used without liner should you so desire.

The liner also absorbs vibration and prevents water penetration into the clamping area, with the added advantage of accommodating size variations due to temperature changes.

EPDM is chosen for its resistance to oils, greases and wide temperature tolerances.

The P Clip band has a special strengthening rib which keeps the clip flush to the bolted surface.

The fixings holes are pierced to accept a standard M6 bolt, with the lower hole being elongated to allow for any adjustment that may be necessary when lining up the fixing holes.

The bandwidth is 12.7mm (1/2") with an 6 mm fixing hole.

This P-clip is specifically designed to pipes and lines with an external diameter of around 8 millimeter.

Stainless Steel P Clips For 8 MM Hoses Tube Fuel Brake Pipe

P12
Stainless Steel P Clips For 12 MM Hoses Tube Fuel Brake Pipe

Stainless Steel P Clips For 12 MM Hoses Tube Fuel Brake Pipe

P clips are used extensively in many industries for securing pipes, hoses and cables.

The snug fitting EPDM liner enables the clips to clamp the pipes, hoses and cables firmly without any possibility of chafing or damage to the surface of the component being clamped, and of course they can be used without liner should you so desire.

The liner also absorbs vibration and prevents water penetration into the clamping area, with the added advantage of accommodating size variations due to temperature changes.

EPDM is chosen for its resistance to oils, greases and wide temperature tolerances.

The P Clip band has a special strengthening rib which keeps the clip flush to the bolted surface.

The fixings holes are pierced to accept a standard M6 bolt, with the lower hole being elongated to allow for any adjustment that may be necessary when lining up the fixing holes.

The bandwidth is 12.7mm (1/2") with an 6 mm fixing hole.

This P-clip is specifically designed to pipes and lines with an external diameter of around 12 millimeter.

Stainless Steel P Clips For 12 MM Hoses Tube Fuel Brake Pipe