Carburettor Linkage Systems
Carburettor Linkage Systems

Carburettor Linkage Systems

On this page you will find various linkage systems to hook up Dellorto DHLA and Weber DCOE carburettors.

Carburettor Linkage Systems

!
LP4301
Fully adjustable Mangoletsi Dellorto DHLA linkage kit - SINGLE cable

Fully adjustable Mangoletsi Dellorto DHLA linkage kit - SINGLE cable

Fully adjustable linkage kit for Dellorto DHLA carburettors mounted as pairs or singles.

Low profile - suitable for height restricted applications.

This kit includes:

  • Cast mounting bracket with fully assembled linkage mechanism
  • Linkage lever and balance lever for connecting to second carburettor
  • "Tongue" of drive lever is 40 mm long, so it can be used on wide spaced carburettors or cut to size for close coupled ones
  • Adjustable ball rod bar complete with dust seals and retaining clips
  • Longer top cover screws for fitting cast bracket to carburettor
  • 2 Allen keys for assembly
  • Spares kit

Click here to download the assembly instructions.

Fully adjustable Mangoletsi Dellorto DHLA linkage kit -  SINGLE cable

LP4303
Fully adjustable Mangoletsi Dellorto DHLA linkage kit - DOUBLE cable

Fully adjustable Mangoletsi Dellorto DHLA linkage kit - DOUBLE cable

Fully adjustable linkage kit for Dellorto DHLA carburettors mounted as pairs or singles.

Low profile - suitable for height restricted applications.

This kit includes:

  • Cast mounting bracket with fully assembled linkage mechanism
  • Linkage lever and balance lever for connecting to second carburettor
  • “Tongue” of drive lever is 40 mm long, so it can be used on wide spaced carburettors or cut for close coupled
  • Adjustable ball rod bar complete with dust seals and retaining clips
  • Longer top cover screws for fitting cast bracket to carburettor
  • Cable assemblies, 1000 mm outer, 1450 mm inner
  • Adjustable bulkhead feedthrough
  • Twin cable pedal adapter block
  • 2 Allen keys for assembly
  • Spares kit

Click here to download the assembly instructions.

Please note that the carburetor that is depicted in the photo is NOT included!

Fully adjustable Mangoletsi Dellorto DHLA linkage kit - DOUBLE cable

LP4241
Fully adjustable Mangoletsi Weber DCOE linkage kit - SINGLE cable

Fully adjustable Mangoletsi Weber DCOE linkage kit - SINGLE cable

Fully adjustable linkage kit for Weber DCOE carburetors mounted as pairs or singles.

Please note that this set is NOT suitable for Weber DCO/SP carburetors!

Low profile - suitable for height restricted applications.

This kit includes:

  • Cast mounting bracket with fully assembled linkage mechanism
  • Linkage lever and balance lever for connecting to second carburetor
  • "Tongue" of drive lever is 40 mm long, so it can be used on wide spaced carburetors or cut to size for close coupled ones
  • Adjustable ball rod bar complete with dust seals and retaining clips
  • Longer top cover screws for fitting cast bracket to carburetor
  • 2 Allen keys for assembly
  • Spares kit

Click here to download the assembly instructions.

Fully adjustable Mangoletsi Weber DCOE linkage kit - SINGLE cable

LP4245
Fully adjustable Mangoletsi Weber DCOE linkage kit - DOUBLE cable

Fully adjustable Mangoletsi Weber DCOE linkage kit - DOUBLE cable

Fully adjustable linkage kit for Weber DCOE carburetors mounted as pairs or singles.

Please note that this set is NOT suitable for Weber DCO/SP carburetors!

Low profile - suitable for height restricted applications.

This kit includes:

  • Cast mounting bracket with fully assembled linkage mechanism
  • Linkage lever and balance lever for connecting to second carburetor
  • The "tongue" of drive lever is 40 mm long, so it can be used on wide spaced carburetors or cut to size for close coupled ones
  • Adjustable ball rod bar complete with dust seals and retaining clips
  • Longer top cover screws for fitting cast bracket to carburetor
  • Cable assemblies: 1000 mm outer, 1450 mm inner
  • Adjustable bulkhead feed-through
  • Twin cable pedal adapter block
  • 2 Allen keys for assembly
  • Spares kit

Click here to download the assembly instructions.

Fully adjustable Mangoletsi Weber DCOE linkage kit - DOUBLE cable

LT5000
Additional External Spring Kit for Weber DCOE Carburetors

Additional External Spring Kit for Weber DCOE Carburetors

Additional external spring kit for Weber DCOE carburetors to provide a secondary return as required by some race scrutineers.

(Carburetor not included).

Suited for the Weber DCOE series.

Single springs are available HERE.

Additional External Spring Kit for Weber DCOE Carburetors

99901.155
Additional external throttle spring

Additional external throttle spring

Additional external spring.

This spring is also part of the Throttle Return Spring Kit.

The spring measures some 64 mm heart-to-heart in length.

 

 

Additional external throttle spring

MAG
Maggard Lever for Dellorto DHLA carburetors

Maggard Lever for Dellorto DHLA carburetors

Special lever for the Dellorto DHLA carburetors that will accept ball & socket connection so it can be configured to your desire.

It matches balance lever 8304.

Required quantity per set of 2 carburettors: 1

It is similar to the following handles:

Maggard Lever for Dellorto DHLA carburetors

LYNXDHLALEVERKC079
Lynx Right Hand Lever for Dellorto DHLA carburetors

Lynx Right Hand Lever for Dellorto DHLA carburetors

Right hand Lynx lever for Dellorto DHLA carburetors.

Outer Radius: 41 mm

Centre hole to linkage mounting hole: 35 mm

 

 

 

 

Lynx Right Hand Lever for Dellorto DHLA carburetors

MRODS
Mangoletsi Adjustable Linkage Rod with Ball and Socket Connectors

Mangoletsi Adjustable Linkage Rod with Ball and Socket Connectors

Mangoletsi Adjustable Linkage Rod with Ball and Socket Connectors

Heavy duty linkage rod with ball ends.

Left-handed M5 thread at one end and right-handed M5 thread at the other for easy adjustment.

Threaded rods can be cut to give shorter length.

Available in the following sizes:

  • Adjustable between 54 and 64 mm
  • Adjustable between 62 and 116 mm
  • Adjustable between 108 and 166 mm
  • Adjustable between 152 and 216 mm

Mangoletsi Adjustable Linkage Rod with Ball and Socket Connectors

LK5
Metal Ball and Socket - M5 - RH thread

Metal Ball and Socket - M5 - RH thread

Metal Ball and Socket as often used on throttle linkage systems.

RightHand M5 Thread!

Total body length: 28 mm
Ball diameter: 8 mm
Stud length and thread: 10 mm - M5 x 0.8

Spare clips are available HERE.

 

 

Metal Ball and Socket - M5 - RH thread

LK6
Metal Ball and Socket - M5 - LH thread

Metal Ball and Socket - M5 - LH thread

Metal Ball and Socket as often used on throttle linkage systems.

LeftHand M5 Thread!

Total body length: 28 mm
Ball diameter: 8 mm
Stud length and thread: 10 mm - M5 x 0.8

Spare clips are available HERE.

 

 

Metal Ball and Socket - M5 - LH thread

LK7
Quick-Release Metal Ball and Socket - M5 - RH thread

Quick-Release Metal Ball and Socket - M5 - RH thread

Metal Ball and Socket with spring-loaded quick-release system.

RightHand M5 Thread!

Total body length: 28 mm
Stud length and thread: 10 mm - M5 x 0.8

 

 

 

Quick-Release Metal Ball and Socket - M5 - RH thread

99903.119
Spare Clip for M5 Ball and Socket

Spare Clip for M5 Ball and Socket

Spare clip for the ball and socket connectors.

Fits our M5 metal version but also many similarly sized plastic sockets and many metal versions as used by car manufacturers.

 

 

 

 

 

Spare Clip for M5 Ball and Socket