Weber IDA 2C carburetor parts
Weber IDA 2C carburetor parts

Weber IDA 2C Parts

Weber IDA 2C carburetor parts.

Please note that there are 2 main versions of the IDA: the 2-barrel version (2C) and the 3-barrel version (3C).
Not all parts are interchangeable.
For the reason, we have decided to make a split between the 2C and 3C.

On this page, you will find the parts pertaining to the 2C version.

The 3C version can be found HERE.

Click HERE for an exploded view drawing of the IDA 2C.

The numbers in the drawing correspond to the numbers in brackets at the beginning of the article description.

Please contact us by email if the part that you are looking for is not listed.

Weber IDA 2C Carburetor Parts

!
(1) Top Cover for 2-Barrel Weber IDA carburetors

(1) Top Cover for 2-Barrel Weber IDA carburetors

Top cover for the 2-barrel versions of the Weber IDA carburetors.

Required quantity per carburettor: 1

This is item number 1 in the drawing.

 

 

 

 

(1) Top Cover for 2-Barrel Weber IDA carburetors
Unfortunately, this top cover is no longer available as a spare part.

79701
(11) Pump Exhaust - Spill Valve for Double Barrel Weber IDA carburetors

(11) Pump Exhaust - Spill Valve for Double Barrel Weber IDA carburetors

Pump Exhaust - Spill Valve for the double barrel Weber IDA 2C carburetors.

Available from stock in sizes:

  • 35
  • 40
  • 45
  • 50
  • 55
  • 60
  • 65
  • 70
  • 80
  • 90
  • 100

Required quantity per carburettor: 1

This is item number 11 in the drawing.

(11) Pump Exhaust - Spill Valve for Double Barrel Weber IDA carburetors

41540.015
(13) Copper Washer for Needle Valve on Weber IDA 2C carburetors

(13) Copper Washer for Needle Valve on Weber IDA 2C carburetors

Copper Washer to seal the Needle Valve on the 2-Barrel Weber IDA series carburetors.

Required quantity per carburettor: 1

This is item number 13 in the drawing.

 

 

 

(13) Copper Washer for Needle Valve on Weber IDA 2C carburetors

41705.021
(14) Top Cover Gasket for 2-Barrel Weber IDA carburetors

(14) Top Cover Gasket for 2-Barrel Weber IDA carburetors

Top cover gasket for the 2-barrel versions of the Weber IDA carburetors.

Required quantity per carburettor: 1

This is item number 14 in the drawing.

 

 

 

(14) Top Cover Gasket for 2-Barrel Weber IDA carburetors

64750.007
(20) Mixture Screw for Weber IDA 2C carburetors

(20) Mixture Screw for Weber IDA 2C carburetors

Brass mixture screw for the 48 mm versions of the 2-Barrel Weber IDA series carburetors.

Required quantity per carburettor: 2

This is item number 20 in the drawing.

 

 

 

 

(20) Mixture Screw for Weber IDA 2C carburetors

47600.007
(21) Mixture Screw Spring for Weber IDA 2C carburetors

(21) Mixture Screw Spring for Weber IDA 2C carburetors

Coil spring to secure the setting of mixture screw number 20 on the Weber IDA48 2C series carburetors.

Required quantity per carburettor: 2

This is item number 21 in the drawing.

 

 

 

(21) Mixture Screw Spring for Weber IDA 2C carburetors

34710.003
(25) Spindle Nut for Weber IDA 2C carburetors

(25) Spindle Nut for Weber IDA 2C carburetors

Spindle nut for the Weber IDA 2C carburetors.

Used to secure the spindle shaft on the 2C versions of the IDA carburettors.

Required quantity per carburetor: 2

This is item number 25 in the drawing.

 

 

 

(25) Spindle Nut for Weber IDA 2C carburetors

55520.004
(26) Spindle Nut Lock Washer for Weber IDA 2C carburetors

(26) Spindle Nut Lock Washer for Weber IDA 2C carburetors

Nut lock washer for the Weber IDA 2C carburetors.

We advise to replace these lock tabs after each use as they are prone to metal fatigue and might lose their locking qualities as a consequence.

Required quantity per carburetor: 2

This is item number 26 in the drawing.

 

TEMPORARILY SOLD OUT!
You can place your order but delivery will be delayed.

(26) Spindle Nut Lock Washer for Weber IDA 2C carburetors

55555.010
(27) Spindle End Cover for Weber IDA 2C carburetors

(27) Spindle End Cover for Weber IDA 2C carburetors

Spindle end cover for the Weber IDA 2C series carburetors.

Required quantity per carburettor: 2

This is item number 27 in the drawing.

 

 

 

 

(27) Spindle End Cover for Weber IDA 2C carburetors

58445.001
(31) Spindle Roll Pin for Weber IDA 2C carburetors

(31) Spindle Roll Pin for Weber IDA 2C carburetors

Spindle roll pin for the double barrel Weber IDA carburetors.

Secures the pump actuating cam onto the throttle spindle.

Required quantity per carburettor: 1

This is item number 31 in the drawing.

 

 

(31) Spindle Roll Pin for Weber IDA 2C carburetors

64570.009
(33) Countersunk Screw for Butterfly Valve on the Weber IDA 2C carburetors

(33) Countersunk Screw for Butterfly Valve on the Weber IDA 2C carburetors

This is a counter sunk screw for the butterfly valve on the dual version (2C) of the Weber IDA carburetors.

Required quantity per carburetor: 4

This is item number 33 in the drawing.

 

(33) Countersunk Screw for Butterfly Valve on the Weber IDA 2C carburetors

47600.007
(38) Throttle Stop Screw Spring for Weber IDA 2C carburetors

(38) Throttle Stop Screw Spring for Weber IDA 2C carburetors

Coil spring to secure the setting of throttle stop screw number 39 on the Weber IDA48 2C series carburetors.

Required quantity per carburettor: 1

This is item number 38 in the drawing.

 

 

(38) Throttle Stop Screw Spring for Weber IDA 2C carburetors

41570.001
(42) Leather Dust Cover for Weber IDA 2C carburetors with open bearings

(42) Leather Dust Cover for Weber IDA 2C carburetors with open bearings

Leather dust cover seal for the Weber IDA 2C carburetors.

This leather cover is used on the Italian-made versions with open bearings.

Required quantity per carburettor: 2

This is item number 42 in the drawing.

Depending on the Ladies and Gentlemen at Weber, these seals are supplied in either Black or Brown color which has no further impact on the quality.

(42) Leather Dust Cover for Weber IDA 2C carburetors with open bearings

7490
(43) Throttle Shaft Bearing for Weber IDA 2C carburetors

(43) Throttle Shaft Bearing for Weber IDA 2C carburetors

Spindle bearing for the Weber IDA Dual or 2C version series carburetors.

Sealed and lubricated for life.

Required quantity per carburetor: 2

This is item number 43 in the drawing.

 

 

 

(43) Throttle Shaft Bearing for Weber IDA 2C carburetors

73401
(45) Main Jet for Weber IDA 2C carburetors

(45) Main Jet for Weber IDA 2C carburetors

Main jet for the Weber IDA 2C carburetor.

Available from our stock in size:

  • 100
  • 105
  • 107
  • 110
  • 112
  • 115
  • 117
  • 120
  • 122
  • 125
  • 130
  • 135
  • 138
  • 140
  • 142
  • 145
  • 150
  • 152
  • 155
  • 160
  • 165
  • 170
  • 175
  • 180
  • 185
  • 190
  • 195
  • 200
  • 205
  • 210
  • 215
  • 220
  • 225
  • 230
  • 235
  • 240
  • 245
  • 250

Required quantity per carburetor: 2

This is item number 45 in the drawing.

(45) Main Jet for Weber IDA 2C carburetors

77401
(47) Air Corrector Jet for Weber IDA 2C carburetors

(47) Air Corrector Jet for Weber IDA 2C carburetors

Air corrector jet for Weber IDA 2C carburetor.

Available from our stock in size:

  • 100
  • 110
  • 115
  • 120
  • 125
  • 130
  • 145
  • 150
  • 160
  • 165
  • 170
  • 175
  • 180
  • 185
  • 190
  • 200
  • 205
  • 210
  • 215
  • 220
  • 225
  • 230
  • 235
  • 240
  • 245
  • 250
  • 260

Required quantity per carburettor: 2

This is item number 47 in the drawing.

(47) Air Corrector Jet for Weber IDA 2C carburetors

52580.001
(48) Emulsion Tube Holder for Weber IDA 2C carburetors

(48) Emulsion Tube Holder for Weber IDA 2C carburetors

Emulsion Tube Holder for the Weber IDA carburetor.

Required quantity per carburetor: 2

This is item number 48 in the drawing.

 

 

(48) Emulsion Tube Holder for Weber IDA 2C carburetors

12715.008
(51) Fuel Union Bolt for Weber IDA 2C carburetors

(51) Fuel Union Bolt for Weber IDA 2C carburetors

Fuel union bolt for the 2-barrel version of the Weber IDA carburetor.

NOT suitable for the 3-barrel version!

Required quantity per carburetor: 1

This is item number 51 in the drawing.

 

(51) Fuel Union Bolt for Weber IDA 2C carburetors

41530.024
(52) Fiber Seal for Fuel Union on Weber IDA 2C carburetors

(52) Fiber Seal for Fuel Union on Weber IDA 2C carburetors

Fiber Seal for the Fuel Union on the Weber IDA carburetor.

Fits between the banjo bolt and union.

Required quantity per carburetor: 1

This is item number 52 in the drawing.

 

 

 

(52) Fiber Seal for Fuel Union on Weber IDA 2C carburetors

CUA001
(53) Straight Fuel Union Set for Weber IDA 2C carburetors

(53) Straight Fuel Union Set for Weber IDA 2C carburetors

Straight Fuel Union Set for the twin-choke Weber IDA carburetors.

Connects to the regular fuel line with 8 mm internal diameter.

The set consists of a straight fuel union, banjo bolt and two copper washers.
These represent items 51, 52, 53 and 54 in the drawing.

Also fits the Weber DCOE and DCO / SP.

Required quantity per carburettor: 1

This is item number 53 in the drawing.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

(53) Straight Fuel Union Set for Weber IDA 2C carburetors

41530.031
(54) Fiber Seal for Fuel Union on Weber IDA carburetors

(54) Fiber Seal for Fuel Union on Weber IDA carburetors

Fiber Seal for the Fuel Union on the Weber IDA carburetor.

Fits between the banjo bolt and carburetor body.

Required quantity per carburettor: 1

This is item number 54 in the drawing.

 

(54) Fiber Seal for Fuel Union on Weber IDA carburetors

41530.024
(56) Fiber Seal for Fuel Filter Cover on Weber IDA 2C carburetors

(56) Fiber Seal for Fuel Filter Cover on Weber IDA 2C carburetors

Fiber Seal for the Fuel Filter Cover on the Weber IDA 2C carburetor.

Required quantity per carburetor: 1

This is item number 56 in the drawing.

 

 

 

(56) Fiber Seal for Fuel Filter Cover on Weber IDA 2C carburetors

61002.010
(57) Fuel Filter Cover for Weber IDA 2C carburetors

(57) Fuel Filter Cover for Weber IDA 2C carburetors

Bronze Fuel Filter Cover for the Weber IDA 2C carburetor.

Required quantity per carburetor: 1

This is item number 57 in the drawing.

 

 

(57) Fuel Filter Cover for Weber IDA 2C carburetors

34725.003
(60, 61 & 62) Self-Locking Nut for Top Cover of Weber IDA 2C carburetors

(60, 61 & 62) Self-Locking Nut for Top Cover of Weber IDA 2C carburetors

Self-locking nut, used on various locations of the top cover of the Weber IDA Dual-Barrel carburetor.

Use to the secure the top cover itself, the trumpet tabs and the jet cover gauze.

Required quantity per carburetor: depending on your set-up

This is item numbers 60, 61 and 62 in the drawing.

(60, 61 & 62) Self-Locking Nut for Top Cover of Weber IDA 2C carburetors

48IDA
Service kit for 1 Weber IDA 2C 48 carburetor

Service kit for 1 Weber IDA 2C 48 carburetor

Comprehensive service kit for the Weber IDA 48 Dual-Barrel carburetors.

Contains all required parts to service 1 carburetor.

Consists, amongst others, of the following parts:

  • 200 size Needle valve
  • Float chamber cover gasket
  • Carb-to-manifold gaskets
  • Various washers
  • Leather throttle shaft seals
  • Parts diagram and float level setting instructions

Service kit for 1 Weber IDA 2C 48 carburetor

TECHBOOK WEBER
Bob Tomlinson's Original Weber Tech Manual Super Tune-Up Guide for VW and Porsche Engines

Bob Tomlinson's Original Weber Tech Manual Super Tune-Up Guide for VW and Porsche Engines

Bob Tomlinson's Original Weber Tech Manual Super Tune-Up Guide for VW and Porsche Engines.

New Weber Tech book by Bob Tomlinson, of CB Performance in California.

This book is mainly aimed at the Weber IDF carb. fitted to type 1, 2, 3 and 4 engines, but has smaller sections on IDA, DCOE, ICT, progressive 32/36DFAV, DCNF etc.

Topics covered in 161 pages:

  • How carburettors work
  • Fitting
  • Tuning
  • Overhauling
  • Jet selection & charts
  • Troubleshooting
  • Ignition timing
  • Air filters
  • Engine tuning

This is the most comprehensive manual available for fitting and tuning Weber carbs onto VW engines.

If you have Webers you'll find it invaluable.

Bob Tomlinson's Original Weber Tech Manual Super Tune-Up Guide for VW and Porsche Engines

WEBER TUNING BOOK
Weber Tuning Manual

Weber Tuning Manual

Weber tuning manual & reference book

Official Weber tuning manual.

92 pages with colour and black and white exploded diagrams of DCOE, IDF, IDA, DCNF and IDA carburettors. with part numbers.

Drawings, dimensions and part numbers of all emulsion tubes available.

Part numbers and sizes available of chokes aux. venturis and jets.

Theory of carburation and technical details.

Weber Tuning Manual

flexoid5xa4
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.

Almost a "First Aid Kit" for the home mechanic!

This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.

You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.

The sheets are made of cellulose based, plasticised gelatin-impregnated material.

The sheets are of the following thickness:

  • 0.15MM
  • 0.25MM
  • 0.4MM
  • 0.8MM
  • 1.6MM

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

GREENFUEL8MM-50cm
Italian style clear green fuel line hose with 8 mm inner diameter

Italian style clear green fuel line hose with 8 mm inner diameter

Italian style clear green fuel line hose with 8 mm inner diameter.

This is the perfect finisher for a successful restoration!

This fuel hose has an 8 mm inner diameter and 11 mm outer diameter.

It is sold in lengths of 50 cm (19.7 inch).

When ordering multiple lengths, we will do our utmost to supply that as 1 piece.

This hose uses 10 - 12 mm jubilee clips.

Italian style clear green fuel line hose with 8 mm inner diameter

gatestextiel8mm
Gates textile covered fuel line hose with 8 mm inner diameter

Gates textile covered fuel line hose with 8 mm inner diameter

This is the top-of-the-line Gates flexible fuel line, resistant to modern day, aggressive, fuels.

Textile covered for the correct "vintage" look.

This fuel hose has an 8 mm inner diameter and 13 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

This small-diameter hose has a durable and oil resistant textile cover that provides a dependable and safe service on fuel circuits in passenger cars.

This hose is resistant to heat, leaded and unleaded fuels, oil and Diesel.
Please note that E10 fuel resistance is NOT mentioned by the manufacturer!

Recommended for clamped hose applications on low-pressure (carburetor) fuel systems in passenger cars.
NOT suited for high pressure fuel injection systems.

Key Features and Benefits:

• The tube resists heat, fuel (leaded and unleaded petrol, diesel) and oil
• The braided textile cover reinforces the hose and is resistant to heat, ozone and weathering
• Working pressure up to 0.6 MPa (6 kg/cm²)
• Temperature range from -35°C to +100°C

Maximum, single, length: 15 meters.

This hose uses 11 - 13 mm jubilee clips.

Gates textile covered fuel line hose with 8 mm inner diameter

2134.0600
Cohline E10-resistant fuel line hose with 8 mm inner diameter

Cohline E10-resistant fuel line hose with 8 mm inner diameter

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose.

This fuel hose has an actual inner diameter of 7.5 mm and 13.5 mm outer diameter and therewith a nice and tight fit for 8 mm fuel unions.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

This hose uses 11 - 13 mm jubilee clips.

Cohline E10-resistant fuel line hose with 8 mm inner diameter

norm5mm
Endless Band Hose Clamp with Buckle - 5 mm wide

Endless Band Hose Clamp with Buckle - 5 mm wide

Endless Band Hose Clamp with Buckle - 5 mm wide.

Again one of those items that allow you to put the finishing touches on a restoration!

This is the famous "endless band hose clamp with buckle" that was used throughout the 1950's, 1960's and 1970's in the car industry.

Unfortunately, these band clamps are only suitable for one-time use and are discarded after removing them.

Over the years, these clamps have become harder and harder to find but we managed to find a source!

We are selling these in sets of 3.

Such a set consist of the following:

  • Approximately 100 cm Zinc-plated band, 5 millimeters wide
  • 3 buckles

This way, you have roughly a foot (or 33 cm) of band per clamp / buckle which is more than enough for regular applications.

Thanks to the generous length of band, there is virtually no limit to the diameter or circumference of the clamp that you wish to apply although these were usually applied to small diameter fuel lines.

Please note that this style of clamping is NOT suitable for stainless steel-braided lines.

Endless Band Hose Clamp with Buckle - 5 mm wide

jubilee11-13
11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp for 8 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 8 mm internal diameter fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 8 mm internal diameter (i.e. 11 - 13 mm external hose diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

2134.01.0600
Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

This is the top-of-the-line Cohline, steel-braided E10-resistant, flexible fuel line / hose.

This fuel hose has an 8 mm inner diameter and 16 mm outer diameter and is therewith suitable for 8 mm fuel unions.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

 This hose uses 14 - 16 mm jubilee clips.

Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

OWV
Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec Fuel Line One Way Valve

jet sizer
Carburettor Jet Gauges

Carburettor Jet Gauges

Calibrated gauges to measure jet sizes.

The perfect way to determine the exact size of jets, regardless of what is indicated on them.

Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.

With these gauges, you can still determine which size these jets are.

Indispensable when working on modified carburettors!

Two different sets available:

Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mm
Set 2: 16 gauges, ranging from 1,50 to 3,00 mm

Priced per set!

Carburettor Jet Gauges

JSG01
Jet size gauge 0.5 to 1.5 mm

Jet size gauge 0.5 to 1.5 mm

Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.

Measurements are taken by inserting the tapered needle into the jet.

The size can then directly be read from the scale.

 

 

 

Jet size gauge 0.5 to 1.5 mm

JDK01
54-Piece Jet Drill Set

54-Piece Jet Drill Set

Jet drill set comprising 50 jet drills and and 4 pin vises.

The perfect way to fine-tune any jet to suit your needs.

Also highly suited to clean clogged-up jets.

The set contains:

  • 4 pin vises to suit all drill sizes included
  • 10 drills ranging from 1,0 to 2,0 mm:
    1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.7, 1.8, 1.9 & 2.0 mm
  • 20 drills ranging is size from 0.3 mm to 1.6 mm:
    0.3, 0.35, 0.4, 0.45, 0.50, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 & 1.6 mm
  • 20 x drills Gauge Number 80 to 61 (0.343 to 0.991 mm / 0.0135 to 0.0390 inches )

54-Piece Jet Drill Set

JET REAMER
16-Piece Jet Reamer Set

16-Piece Jet Reamer Set

Jet reamer kit comprising 16 reamers and and a pin vise.

The perfect way to fine-tune any jet to suit your needs.

The set contains:

  • 1 pin vise to suit all reamer sizes in this set
  • 1 storage case
  • 16 reamers ranging is size from 0.33 mm to 2.00 mm:
    0.33; 0.40; 0.45; 0.50; 0.60; 0.70; 0.75; 0.80; 0.90; 1.00; 1.10; 1.20; 1.40; 1.60; 1.80; 2.00 mm

16-Piece Jet Reamer Set

G4074
Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit.

The Tune-up plug for Petrol or LPG, 2 and 4 stroke engines with single, twin or multiple carburettors or fuel injection systems.

The original and best tool for seeing what's happening inside the combustion chamber of the petrol engine.

It allows you to see the combustion and to adjust the mixture by color.

Fits most petrol engines in standard form with additional adapters available for vehicles with alternative sized spark plugs.

Kit includes:

  • See-Through Spark Plug
  • Hexagonal adapter for spark plug wrench
  • Copper sealing washer
  • Extension Cord
  • Extension tube with mirror
  • Cleaning brush
  • Instructions in English

Colortune will fit most vehicles.

Extra adapter sizes available separately

Available in the following basic thread sizes:

  • 10 mm
  • 12 mm
  • 14 mm - SOLD OUT AT THE MOMENT!

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Colortune See Through Spark Plug Kit

Available from our Stock

G4053
Gunson Carbalancer Carburetor Synchronizing Tool

Gunson Carbalancer Carburetor Synchronizing Tool

Gunson Car Balancer.

Internal combustion engines use a mixture of air and petrol to generate their power.

The performance therefore is influenced by the air flowing into it and the petrol that is metered out by the carburettor.

Unless the air flow in Twin or Multiple carburettors is correctly set, the correct mixture adjustment is unlikely to be achieved and this is the simplest tool to achieve that.

Suitable for use on SU, Solex, Auto-Lite (Fomoco), Stromberg, Weber and Zenith and can be adjusted to fit most carburettors including sidedraft, downdraft with air intakes (Venturi) from 25 mm to 67 mm (1”-2”) diameter

  • Easy read scale indicates the air flow and allows adjustment to optimum efficiency
  • Provides smoother and better acceleration
  • Carbalancer can be adjusted to fit most carburettors
  • Easy to follow instructions

The user manual for the Gunson Carbalancer, in English, can be downloaded HERE.

Available from our stock, ready to be shipped.

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Carbalancer Carburetor Synchronizing Tool

MANOMETER2
2 Column Manometer - Synchrometer Carbtune Pro

2 Column Manometer - Synchrometer Carbtune Pro

2 Column Manometer

The New Carbtune Pro - essential for balancing multiple carburettors.

  • Superior resolution to dial type gauges
  • Easily read scale
  • Comes complete with 2 x 5mm and 2 x 6mm ultra high temperature glass filled engineering nylon adapters and rubber hoses.
  • Adapters will suit DHLA & DCOE carburettors and many motorcycle carburettors.
  • Stainless steel columns indicate vacuum
  • No calibration or set-up required
  • High impact plastic casing and scale tubes - no glass
  • Dampers supplied to reduce fluctuations
  • Full instructions

Also suitable for car- and motorcycle engines which have the possibility of hooking up vacuum lines.

Replacement line can be found HERE.
Replacement, brass, vacuum take-off can be found HERE.

2 Column Manometer - Synchrometer Carbtune Pro

MANOMETER4
4 Column Manometer - Synchrometer Carbtune Pro

4 Column Manometer - Synchrometer Carbtune Pro

4 Column Manometer

The New Carbtune Pro - essential for balancing multiple carburettors.

  • Superior resolution to dial type gauges
  • Easy to read scale
  • Comes complete with 4 x 5 mm and 4 x 6 mm ultra high temperature glass filled engineering nylon adapters and rubber hoses.
  • Adapters will suit DHLA & DCOE carburettors and many motorcycle carburettors.
  • Stainless steel columns indicate vacuum
  • No calibration or set-up required
  • High impact plastic casing and scale tubes - no glass
  • Dampers supplied to reduce fluctuations
  • Full instructions

Also suitable for car- and motorcycle engines which have the possibility of hooking up vacuum lines.

Replacement line can be found HERE.
Replacement, brass, vacuum take-off can be found HERE.

4 Column Manometer - Synchrometer Carbtune Pro

9679
Brass vacuum take-off adapter for carburetors and manifolds

Brass vacuum take-off adapter for carburetors and manifolds

Vacuum take-off adapter for Dellorto DHLA and PHF.

Vacuum take off adapter, will fit standard take off point of DHLA carburetors, DHLB carburettors, and PHF carburettors.

Also fits the Weber DCOE series carburettors and Solex ADDHE.

 

Brass vacuum take-off adapter for carburetors and manifolds

SYNCHRONOMETER
Synchrometer airflow meter for carburetors

Synchrometer airflow meter for carburetors

Synchrometer airflow meter for various carburetors.

Pushes into the trumpet / ram pipe / velocity stack or throat to measure the airflow to enable you to balance multiple carburettors.

  • Instructions included
  • The original genuine high quality German made product
  • Can be used for all Weber DCOE and IDF and Dellorto DHLA, DRLA carbs with round intakes or trumpets
  • Can also be used with motorcycle carburetors with round intakes

    Total length of unit 121mm

    Rubber cone dimensions:
    Small end diameter 40mm
    Large end diameter 55mm
    Length of cone 36mm

Synchrometer airflow meter for carburetors