Weber DCNF Carburetor Parts
Weber DCNF Carburetor Parts

Weber DCNF Parts

Weber DCNF Carburetor Parts.

On this page you will find all currently available parts for the Weber DCNF carburettors.

Click HERE for an exploded view drawing of the Weber DCNF.

The numbers in the drawing correspond to the numbers in brackets at the beginning of the article description.

Please click HERE for the instructions on how to set the float level on the Weber DCNF series.

Please contact us by email if the part that you are looking for is not listed yet as there's a good chance that we can help you anyway.

Weber DCNF Carburetor Parts

!
DCNF BASE GASKET MED
Thick Base Gasket for Weber DCNF carburetors

Thick Base Gasket for Weber DCNF carburetors

This is the THICK base gasket for the Weber DCNF series carburettor.

This gasket measures 1.8 mm in thickness.

Please note that there is also a THIN version.

Required quantity per carburettor: 1

This item is NOT in the drawing.

 

 

Thick Base Gasket for Weber DCNF carburetors

DCNF BASE GASKET THN
Thin Base Gasket for Weber DCNF carburetors

Thin Base Gasket for Weber DCNF carburetors

This is the THIN base gasket for the Weber DCNF series carburettor.

This gasket measures 0.8 mm in thickness.

Please note that there is also a THICK version.

Required quantity per carburettor: 1

This item is NOT in the drawing.

Thin Base Gasket for Weber DCNF carburetors

DCNFBASEGASKET
Bakelite Spacer for Weber DCNF carburetors

Bakelite Spacer for Weber DCNF carburetors

This is a Bakelite spacer for the Weber DCNF carburetors.

These spacers are used to reduce the transfer of heat coming from the inlet manifold.

It has a paper gasket on both sides.

It measures 4.85mm in thickness.

The main bores are 40 mm.

Required quantity per carburettor: 1

This item is NOT in the drawing.

Bakelite Spacer for Weber DCNF carburetors

99901.392
Banjo Bolt for Weber DCNF carburetors

Banjo Bolt for Weber DCNF carburetors

Special, cross-drilled, banjo bolt to secure the fuel line on the Weber DCNF carburetors.

This bolt uses 2 fiber washers that can be ordered right along with it by selecting them in the drop box.

Required quantity per carburettor: 1

This item is NOT shown in the drawing.

Banjo Bolt for Weber DCNF carburetors

41530.024
Fiber Seal for Fuel Banjo for Weber DCNF carburetors

Fiber Seal for Fuel Banjo for Weber DCNF carburetors

Fiber Seal for Fuel Banjo for the Weber DCNF carburetors.

It is the outer one, placed between the banjo and the bolt.

Required quantity per carburettor: 1

This item is NOT in the drawing.

Fiber Seal for Fuel Banjo for Weber DCNF carburetors

41530.031
Fiber Seal for Fuel Banjo for Weber DCNF carburetors

Fiber Seal for Fuel Banjo for Weber DCNF carburetors

Fiber Seal for Fuel Banjo for the Weber DCNF carburetors.

It is the inner one, placed between the banjo and the carburettor body.

Required quantity per carburettor: 1

This item is NOT in the drawing.

Fiber Seal for Fuel Banjo for Weber DCNF carburetors

79503
(10) Needle Valve Assembly for Weber DCNF carburetors

(10) Needle Valve Assembly for Weber DCNF carburetors

Needle valve assembly for the Weber DCNF series carburettor.

Consists of:

  • Spring-loaded, metal-tipped needle valve
  • Needle valve seat

Available in the following sizes:

  • 150
  • 175
  • 200
  • 225
  • 250
  • 300

Required quantity per carburettor: 1

This is item number 10 in the drawing.

(10) Needle Valve Assembly for Weber DCNF carburetors

B61450
(16) F Type Emulsion Tube for Weber DCNF carburetors

(16) F Type Emulsion Tube for Weber DCNF carburetors

F-type emulsion tube for the Weber DCNF series carburettor.

Can be supplied in the following versions:

  • F21
  • F22
  • F24 - in stock
  • F25
  • F26
  • F30
  • F33
  • F42
  • F43

Please note that these emulsion tubes have a usual lead time of approximately 1.5 weeks before shipping (unless indicated otherwise).
At times, the supply situation is really dramatic and it might take longer.

Required quantity per carburettor: 2

This is item number 16 in the drawing.

(16) F Type Emulsion Tube for Weber DCNF carburetors

41015.015
(17) Brass Float for Weber DCNF carburetors

(17) Brass Float for Weber DCNF carburetors

Brass float for the Weber DCNF carburetors.

This brass float replaces the previous brass version (41015.005) and previous plastic / resin version (41015.018).
When it replaces the brass version, please set the float height at 48 mm.
When it replaces the plastic / resin version, please set the float height at 44 mm.

Please click HERE for the instructions on how to set the float level on the Weber DCNF series.

Required quantity per carburettor: 1

This is item number 17 in the drawing.

(17) Brass Float for Weber DCNF carburetors

73405
(24) Main Jet for Weber DCNF carburetors

(24) Main Jet for Weber DCNF carburetors

Main jet for the Weber DCNF series carburettor.

Available is size:

  • 110
  • 115
  • 120
  • 125
  • 130
  • 135
  • 140
  • 145
  • 150
  • 155

Required quantity per carburettor: 2

This is item number 24 in the drawing.

(24) Main Jet for Weber DCNF carburetors

74405
(25) Idle Jet for Weber DCNF carburetors

(25) Idle Jet for Weber DCNF carburetors

Idle (or progression) jet for the Weber DCNF series carburettor.

Available from stock in size:

  • 40
  • 45
  • 50
  • 55

In case you require other size(s), please don't hesitate to contact us by email.

Required quantity per carburettor: 2

This is item number 25 in the drawing.

(25) Idle Jet for Weber DCNF carburetors

41565.045
(26) O-Ring for the Idle Jet Holder on Weber DCNF carburetors

(26) O-Ring for the Idle Jet Holder on Weber DCNF carburetors

Viton o-ring to seal the idle jet holder on the Weber DCNF series carburetors.

Required quantity per carburetor: 2

This is item number 26 in the drawing.

 

 

 

(26) O-Ring for the Idle Jet Holder on Weber DCNF carburetors

CCR52570.006
(27) Idle Jet Holder for Weber DCNF carburetors - Old Style

(27) Idle Jet Holder for Weber DCNF carburetors - Old Style

Holder for the idle (or progression) jet for the Weber DCNF series carburetor.

Please note:
This is the now obsolete version of this idle jet holder that measures some 17 mm in overall length.
Later versions of these carburetors used a different version holder that measured 13 mm in overall length.
That new version can be found HERE.

The production of these old version was stopped by Weber many years ago and consequently, these are so-called New-Old-Stock jet holders and they are only available as long as the stock lasts!

Required quantity per carburettor: 2

This is item number 27 in the drawing.

(27) Idle Jet Holder for Weber DCNF carburetors - Old Style

52570.006
(27) Idle Jet Holder for Weber DCNF carburetors - New Style

(27) Idle Jet Holder for Weber DCNF carburetors - New Style

Holder for the idle (or progression) jet for the Weber DCNF series carburetor.

Please note:
This is the current production version of this idle jet holder that measures some 13 mm in overall length.
Early versions of these carburetors used a different holder that measured 17 mm in overall length.
That old version can be found HERE.

Required quantity per carburettor: 2

This is item number 27 in the drawing.

(27) Idle Jet Holder for Weber DCNF carburetors - New Style

47407.261
(29) Pump Diaphragm for Weber DCNF carburetors

(29) Pump Diaphragm for Weber DCNF carburetors

Replacement diaphragm for the pump on the Weber DCNF series carburetors.

Please note that this diaphragm is now supplied as shown in the picture, with the extra eyelet.
This eyelet serves no purpose on the DCNF application and consequently can be cut off if you desire to do so but it can also remain in place.

Required quantity per carburettor: 1

This is item number 29 in the drawing.

(29) Pump Diaphragm for Weber DCNF carburetors

10005.211
(36) Throttle Shaft / Spindle for Weber DCNF carburetors

(36) Throttle Shaft / Spindle for Weber DCNF carburetors

Throttle shaft (or spindle if you want) for the Weber DCNF carburetors.

Fits the 36, 40 and 42 mm versions.

Required quantity per carburettor: 1

This is item number 36 in the drawing.

 

(36) Throttle Shaft / Spindle for Weber DCNF carburetors

S57392022
(38) Screw for Butterfly Valve on Weber DCNF carburetors

(38) Screw for Butterfly Valve on Weber DCNF carburetors

This is the screw to secure the butterfly valve on the Weber DCNF carburetors.

Required quantity per carburettor: 4

This is item number 38 in the drawing.

 

 

(38) Screw for Butterfly Valve on Weber DCNF carburetors

64755.007
(46) Short Mixture Screw for Weber DCNF carburetors

(46) Short Mixture Screw for Weber DCNF carburetors

Mixture screw for the Weber DCNF carburetors.

This is the short version with the "stepped taper" and an overall length of 31 mm.

The long version with "smooth taper" and an overall length of 33 mm can be found HERE.

Required quantity per carburettor: 2

This is item number 46 in the drawing.

 

(46) Short Mixture Screw for Weber DCNF carburetors

64750.003
(46) Long Mixture Screw for Weber DCNF carburetors

(46) Long Mixture Screw for Weber DCNF carburetors

Mixture screw for the Weber DCNF carburetors.

This is the long version with an overall length of 33 mm and a "smooth taper".

The short, 31 mm, version with a "stepped taper" can he found HERE.

Required quantity per carburettor: 2

This is item number 46 in the drawing.

 

(46) Long Mixture Screw for Weber DCNF carburetors

64750.056
(46) Knurled Mixture Screw for Weber DCNF carburetors

(46) Knurled Mixture Screw for Weber DCNF carburetors

Brass, knurled, mixture screw for the Weber DCNF carburetors.

This is the special version with the knurled head that was mainly used on the later versions of the DCNF.

Required quantity per carburettor: 2

This is item number 46 in the drawing.

 

 

(46) Knurled Mixture Screw for Weber DCNF carburetors

DCNF DCNVH36
Weber DCNF36 DNCVH36 and DC36 Carburetors Service Kit

Weber DCNF36 DNCVH36 and DC36 Carburetors Service Kit

Service kit for the Weber DCNF 36, DNCVH 36 and DC 36 series carburetors.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Float chamber gasket
  • Pump gasket
  • Pump diaphragm
  • Base gasket
  • Complete needle valve (size 175)
  • Various Viton o-rings
  • Various fiber washers
  • Various copper washers
  • Various aluminum washers

Please click HERE for the data on how to set the float level on the Weber DCNF series.

This is a Carburetor City carburetor service kit of outstanding Italian manufacture.

Weber DCNF36 DNCVH36 and DC36 Carburetors Service Kit

DCNF40 SERVICE KIT
Weber DCNF40 Carburetor Service Kit

Weber DCNF40 Carburetor Service Kit

Service kit for the Weber DCNF 40 series carburetors.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Float chamber gasket
  • Pump gasket
  • Pump diaphragm
  • Complete needle valve (size 175)
  • Various Viton o-rings
  • Various fiber rings
  • Various copper washers
  • Various aluminum washers

Please click HERE for the data on how to set the float level on the Weber DCNF series.

This is a Carburetor City carburetor service kit of outstanding Italian manufacture.

Weber DCNF40 Carburetor Service Kit

DCNF SERVICE KIT
Weber DCNF42 and DCNF44 Carburetor Service Kit

Weber DCNF42 and DCNF44 Carburetor Service Kit

Original service kit for the Weber DCNF 42 or DCNF 44 series carburetors.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Different versions of the float chamber gasket
  • Pump gasket
  • Pump diaphragm
  • Complete needle valve (size 200)
  • All required Viton o-rings
  • All required fiber rings
  • Throttle return spring
  • Various copper washers
  • Various aluminum washers
  • Various small parts as per the photograph

This is a Carburetor City carburetor service kit of outstanding Italian manufacture.

Weber DCNF42 and DCNF44 Carburetor Service Kit

DCNF PASO
Weber DCNF44 Carburetor Service Kit for Ducati Paso

Weber DCNF44 Carburetor Service Kit for Ducati Paso

Service kit for the Weber DCNF 44 series carburetors as used on the Ducati Paso.

Contains amongst others, the following parts to service 1 carburettor:

  • Float Chamber Gasket
  • Pump Diaphragm
  • Complete Needle Valve (size 300)
  • Internal Fuel Filter
  • Float Hinge Pin
  • Lock Tabs for Throttle Shaft Nuts
  • Various Viton o-rings
  • Various Fiber Washers
  • Various Copper Washers
  • Various Aluminum Washers

Please click HERE for the instructions on how to set the float level on the Weber DCNF series.

This is a Carburetor City carburetor service kit of outstanding Italian manufacture.

Weber DCNF44 Carburetor Service Kit for Ducati Paso

K775SE
3 x Weber DCNF Service Kit for Ferrari Dino 206 GT

3 x Weber DCNF Service Kit for Ferrari Dino 206 GT

3 x service kit for the Weber DCNF 12 and 13 carburetors.

Contains all required parts to service 3 carburettors.

Consists, amongst others, of the following parts:

  • 3 Float chamber gaskets
  • 3 Pump gaskets
  • 3 Pump diaphragms
  • 3 Complete needle valves (size 175)
  • Various Viton o-rings
  • Various Fiber Washers
  • Various Copper Washers
  • Various Aluminum Washers

Suitable for amongst others the Ferrari Dino 206GT.

Please click HERE for instructions on how to set the float level on the Weber DCNF series.

This is a Carburetor City service kit of superior Italian manufacture.

3 x Weber DCNF Service Kit for Ferrari Dino 206 GT

K776SE
4 x Weber DCNF Service Kit for Ferrari 308 GT4 and Lamborghini Urraco

4 x Weber DCNF Service Kit for Ferrari 308 GT4 and Lamborghini Urraco

4 x service kit for the Weber DCNF 35, 36, 37, 38, 40 and 43 carburetors.

Contains all required parts to service 4 carburettors.

Consists, amongst others, of the following parts:

  • 4 Float chamber gaskets
  • 4 Pump gaskets
  • 4 Pump diaphragms
  • 4 Complete needle valves (size 175)
  • Various Viton o-rings
  • Various Fiber Washers
  • Various Copper Washers
  • Various Aluminum Washers

Suitable for amongst others the Ferrari 308 GT/4 and Lamborgini Urraco 3000.

Please click HERE for instructions on how to set the float level on the Weber DCNF series.

This is a Carburetor City service kit of superior Italian manufacture.

4 x Weber DCNF Service Kit for Ferrari 308 GT4 and Lamborghini Urraco

K778SE
6 x Weber DCN 40 Service Kit for Ferrari 275 GTB and 275 GTS and 365 GTB/4 Daytona

6 x Weber DCN 40 Service Kit for Ferrari 275 GTB and 275 GTS and 365 GTB/4 Daytona

6 x service kit for the Weber DCN 40 carburetors.

Contains all required parts to service 6 carbs.

Consists, amongst others, of the following parts:

  • 6 Float chamber gaskets
  • 6 Pump gaskets
  • 6 Ppump diaphragms
  • 6 Complete needle valves (size 175)
  • Various Viton o-rings
  • Various Fiber Washers
  • Various Copper Washers
  • Various Aluminum Washers

Suitable for amongst others the Ferrari 275GTB and 275GTS and the Daytona 365 GTB 4.

Please click HERE for instructions on how to set the float level on the Weber DCNF series.

This is a Carburetor City service kit of superior Italian manufacture.

6 x Weber DCN 40 Service Kit for Ferrari 275 GTB and 275 GTS and 365 GTB/4 Daytona

PMW137
Rebuild Kit for Weber 36 DCNFA carburetors for Simca 1307 S and TI

Rebuild Kit for Weber 36 DCNFA carburetors for Simca 1307 S and TI

Service kit for the Weber DCNFA 36 carburetor as fitted to, amongst others, the 1294 cc Simca 1307 S and 1307 TI.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Carburetor-to-manifold gasket
  • Fuel filter
  • Pump diaphragm
  • Power valve diaphragm
  • Needle Valve assembly; size 175
  • Aluminum washer
  • Fiber washer
  • Various rubber / Viton O-Rings

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Weber 36 DCNFA carburetors for Simca 1307 S and TI

TECHBOOK WEBER
Bob Tomlinson's Original Weber Tech Manual Super Tune-Up Guide for VW and Porsche Engines

Bob Tomlinson's Original Weber Tech Manual Super Tune-Up Guide for VW and Porsche Engines

Bob Tomlinson's Original Weber Tech Manual Super Tune-Up Guide for VW and Porsche Engines.

New Weber Tech book by Bob Tomlinson, of CB Performance in California.

This book is mainly aimed at the Weber IDF carb. fitted to type 1, 2, 3 and 4 engines, but has smaller sections on IDA, DCOE, ICT, progressive 32/36DFAV, DCNF etc.

Topics covered in 161 pages:

  • How carburettors work
  • Fitting
  • Tuning
  • Overhauling
  • Jet selection & charts
  • Troubleshooting
  • Ignition timing
  • Air filters
  • Engine tuning

This is the most comprehensive manual available for fitting and tuning Weber carbs onto VW engines.

If you have Webers you'll find it invaluable.

Bob Tomlinson's Original Weber Tech Manual Super Tune-Up Guide for VW and Porsche Engines

WEBER TUNING BOOK
Weber Tuning Manual

Weber Tuning Manual

Weber tuning manual & reference book

Official Weber tuning manual.

92 pages with colour and black and white exploded diagrams of DCOE, IDF, IDA, DCNF and IDA carburettors. with part numbers.

Drawings, dimensions and part numbers of all emulsion tubes available.

Part numbers and sizes available of chokes aux. venturis and jets.

Theory of carburation and technical details.

Weber Tuning Manual

HAYNES1575
Haynes Weber Carburetor Manual - Zenith - Stromberg - SU

Haynes Weber Carburetor Manual - Zenith - Stromberg - SU

Written for the do-it-yourselfer and good enough for the professional!

Table of contents:

  • Introduction
  • Chapter 1: Basic carburetion
  • Chapter 2: Carburetor fitting
  • Chapter 3: Maintenance and servicing
  • Chapter 4: Overhaul
  • Chapter 5: Converting to Weber carburetors
  • Chapters 6 -13: Specific Weber carburetors
  • Chapters 14-16: Specific Zenith Stromberg carburetors
  • Chapters 17-21: Specific SU carburetors

It covers the theory, specifications, fault diagnosis, repairs and service adjustments on the following carburettors:

  • Weber DAF
  • Weber DCD
  • Weber DFA
  • Weber DFV
  • Weber DFD
  • Weber DFE
  • Weber DFM
  • Weber DFT
  • Weber DGV
  • Weber DIF
  • Weber IDA
  • Weber IDF
  • Weber IDS
  • Weber IDT
  • Weber DCNF
  • Weber DCOE
  • Weber DFAV
  • Weber DFTA
  • Weber DGAS
  • Weber DGAV
  • Weber IDAP
  • Weber IDTP
  • Zenith Stromberg CD “constant depression” carburetors
  • Zenith Stromberg CD
  • Zenith Stromberg CDS
  • Zenith Stromberg CDS-2
  • Zenith Stromberg CDSE
  • Zenith Stromberg CD-2E
  • Zenith Stromberg CDST
  • Zenith Stromberg CDSET
  • SU type H
  • SU type HD
  • SU type HS
  • SU type HIF (including electronic) carburetors and auxiliary starting devices

Some 352 pages that cover the adjusting, tuning and overhauling of the above mentioned carburetors.

Contains step-by-step instructions and Haynes Hints.

Language: English

Haynes Weber Carburetor Manual - Zenith - Stromberg - SU

SYNCHRONOMETER
Synchrometer airflow meter for carburetors

Synchrometer airflow meter for carburetors

Synchrometer airflow meter for various carburetors.

Pushes into the trumpet / ram pipe / velocity stack or throat to measure the airflow to enable you to balance multiple carburettors.

  • Instructions included
  • The original genuine high quality German made product
  • Can be used for all Weber DCOE and IDF and Dellorto DHLA, DRLA carbs with round intakes or trumpets
  • Can also be used with motorcycle carburetors with round intakes

Total length of unit 121mm

Rubber cone dimensions:
Small end diameter 40mm
Large end diameter 55mm
Length of cone 36mm

Synchrometer airflow meter for carburetors

SYNCHRONOMETERDCNF
Synchrometer adapter for Weber DCNF carburetors

Synchrometer adapter for Weber DCNF carburetors

Synchrometer adapter to suit Weber DCNF carburetors.

It measures approximately 43 mm outside diameter at carburettor end.

 

 

 

 

Synchrometer adapter for Weber DCNF carburetors

flexoid5xa4
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.

Almost a "First Aid Kit" for the home mechanic!

This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.

You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.

The sheets are made of cellulose based, plasticised gelatin-impregnated material.

The sheets are of the following thickness:

  • 0.15 MM
  • 0.25 MM
  • 0.4 MM
  • 0.8 MM
  • 1.6 MM

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

GREENFUEL8MM-50cm
Italian style clear green fuel line hose with 8 mm inner diameter

Italian style clear green fuel line hose with 8 mm inner diameter

Italian style clear green fuel line hose with 8 mm inner diameter.

This is the perfect finisher for a successful restoration!

This fuel hose has an 8 mm inner diameter and 11 mm outer diameter.

It is sold in lengths of 50 cm (19.7 inch).

When ordering multiple lengths, we will do our utmost to supply that as 1 piece.

This hose uses 10 - 12 mm jubilee clips.

Alternatively, this hose simply looks great when used with the "Endless band & Buckle" hose clamps like in the photo.

Please note:
This hose is NOT E10 resistant.
Do not use this hose if you are not able to avoid using Ethanol-containing fuels.

Italian style clear green fuel line hose with 8 mm inner diameter

gatestextiel8mm
Gates textile covered fuel line hose with 8 mm inner diameter

Gates textile covered fuel line hose with 8 mm inner diameter

This is the top-of-the-line Gates flexible fuel line, resistant to modern day, aggressive, fuels.

Textile covered for the correct "vintage" look.

This fuel hose has an 8 mm inner diameter and 13 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

This small-diameter hose has a durable and oil resistant textile cover that provides a dependable and safe service on fuel circuits in passenger cars.

This hose is resistant to heat, leaded and unleaded fuels, oil and Diesel.
Please note that E10 fuel resistance is NOT mentioned by the manufacturer!

Recommended for clamped hose applications on low-pressure (carburetor) fuel systems in passenger cars.
NOT suited for high pressure fuel injection systems.

Key Features and Benefits:

• The tube resists heat, fuel (leaded and unleaded petrol, diesel) and oil
• The braided textile cover reinforces the hose and is resistant to heat, ozone and weathering
• Working pressure up to 0.6 MPa (6 kg/cm²)
• Temperature range from -35°C to +100°C

Maximum, single, length: 15 meters.

This hose uses 11 - 13 mm jubilee clips.

Gates textile covered fuel line hose with 8 mm inner diameter

2134.0600
Cohline E10-resistant fuel line hose with 8 mm inner diameter

Cohline E10-resistant fuel line hose with 8 mm inner diameter

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose.

This fuel hose has an actual inner diameter of 7.5 mm and 13.5 mm outer diameter and therewith a nice and tight fit for 8 mm fuel unions.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

This hose uses 11 - 13 mm jubilee clips.

Cohline E10-resistant fuel line hose with 8 mm inner diameter

norm5mm
Endless Band Hose Clamp with Buckle - 5 mm wide

Endless Band Hose Clamp with Buckle - 5 mm wide

Endless Band Hose Clamp with Buckle - 5 mm wide.

Again one of those items that allows you to put the finishing touches on a restoration!

This is the famous "endless band hose clamp with buckle" that was used throughout the 1950's, 1960's and 1970's in the car industry.

Unfortunately, these band clamps are only suitable for one-time use and are discarded after removing them.

Over the years, these clamps have become harder and harder to find but we managed to find a source!

We are selling these in sets.

Such a set consist of the following:

  • Approximately 100 cm Zinc-plated band, 5 millimeters wide
  • 3 buckles

This way, you have roughly a foot (or 33 cm) of band per clamp / buckle which is more than enough for regular applications.

Thanks to the generous length of band, there is virtually no limit to the diameter or circumference of the clamp that you wish to apply although these were usually applied to small diameter fuel lines.

Please note that this style of clamping is NOT suitable for steel-braided lines.

Endless Band Hose Clamp with Buckle - 5 mm wide

jubilee11-13
11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp for 8 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 8 mm internal diameter fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 8 mm internal diameter (i.e. 11 - 13 mm external hose diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

2134.01.0600
Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

Back in stock: Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

This is the top-of-the-line Cohline, steel-braided E10-resistant, flexible fuel line / hose.

This fuel hose has an 8 mm inner diameter and 16 mm outer diameter and is therewith suitable for 8 mm fuel unions.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

 This fuel line uses 15 - 17 mm jubilee clips.

Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

OWV
Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec Fuel Line One Way Valve

jet sizer
Carburettor Jet Gauges

Carburettor Jet Gauges

Calibrated gauges to measure jet sizes.

The perfect way to determine the exact size of jets, regardless of what is indicated on them.

Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.

With these gauges, you can still determine which size these jets are.

Indispensable when working on modified carburettors!

Two different sets available:

Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mm
Set 2: 16 gauges, ranging from 1,50 to 3,00 mm

Priced per set!

Carburettor Jet Gauges

JSG01
Jet size gauge 0.5 to 1.5 mm

Jet size gauge 0.5 to 1.5 mm

Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.

Measurements are taken by inserting the tapered needle into the jet.

The size can then directly be read from the scale.

 

 

 

Jet size gauge 0.5 to 1.5 mm

JDK01
54-Piece Jet Drill Set

54-Piece Jet Drill Set

Jet drill set comprising 50 jet drills and and 4 pin vises.

The perfect way to fine-tune any jet to suit your needs.

Also highly suited to clean clogged-up jets.

The set contains:

  • 4 pin vises to suit all drill sizes included
  • 10 drills ranging from 1,0 to 2,0 mm:
    1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.7, 1.8, 1.9 & 2.0 mm
  • 20 drills ranging is size from 0.3 mm to 1.6 mm:
    0.3, 0.35, 0.4, 0.45, 0.50, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 & 1.6 mm
  • 20 x drills Gauge Number 80 to 61 (0.343 to 0.991 mm / 0.0135 to 0.0390 inches )

54-Piece Jet Drill Set

JET REAMER
16-Piece Jet Reamer Set

16-Piece Jet Reamer Set

Jet reamer kit comprising 16 reamers and and a pin vise.

The perfect way to fine-tune any jet to suit your needs.

The set contains:

  • 1 pin vise to suit all reamer sizes in this set
  • 1 storage case
  • 16 reamers ranging is size from 0.33 mm to 2.00 mm:
    0.33; 0.40; 0.45; 0.50; 0.60; 0.70; 0.75; 0.80; 0.90; 1.00; 1.10; 1.20; 1.40; 1.60; 1.80; 2.00 mm

16-Piece Jet Reamer Set

G4074
Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit

Back in stock: Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit.

The Tune-up plug for Petrol or LPG, 2 and 4 stroke engines with single, twin or multiple carburettors or fuel injection systems.

The original and best tool for seeing what's happening inside the combustion chamber of the petrol engine.

It allows you to see the combustion and to adjust the mixture by color.

Fits most petrol engines in standard form with additional adapters available for vehicles with alternative sized spark plugs.

Kit includes:

  • See-Through Spark Plug
  • Hexagonal adapter for spark plug wrench
  • Copper sealing washer
  • Extension Cord
  • Extension tube with mirror
  • Cleaning brush
  • Instructions in English

Colortune will fit most vehicles.

Extra adapter sizes available separately

Available in the following basic thread sizes:

  • 10 mm
  • 12 mm
  • 14 mm

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Colortune See Through Spark Plug Kit

Available from our Stock

G4053
Gunson Carbalancer Carburetor Synchronizing Tool

Gunson Carbalancer Carburetor Synchronizing Tool

Gunson Car Balancer.

Internal combustion engines use a mixture of air and petrol to generate their power.

The performance therefore is influenced by the air flowing into it and the petrol that is metered out by the carburettor.

Unless the air flow in Twin or Multiple carburettors is correctly set, the correct mixture adjustment is unlikely to be achieved and this is the simplest tool to achieve that.

Suitable for use on SU, Solex, Auto-Lite (Fomoco), Stromberg, Weber and Zenith and can be adjusted to fit most carburettors including sidedraft, downdraft with air intakes (Venturi) from 25 mm to 67 mm (1”-2”) diameter

  • Easy read scale indicates the air flow and allows adjustment to optimum efficiency
  • Provides smoother and better acceleration
  • Carbalancer can be adjusted to fit most carburettors
  • Easy to follow instructions

The user manual for the Gunson Carbalancer, in English, can be downloaded HERE.

Available from our stock, ready to be shipped.

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Carbalancer Carburetor Synchronizing Tool

MANOMETER2
2 Column Manometer - Synchrometer Carbtune Pro

2 Column Manometer - Synchrometer Carbtune Pro

2 Column Manometer

The New Carbtune Pro - essential for balancing multiple carburettors.

  • Superior resolution to dial type gauges
  • Easily read scale
  • Comes complete with 2 x 5mm and 2 x 6mm ultra high temperature glass filled engineering nylon adapters and rubber hoses.
  • Adapters will suit DHLA & DCOE carburettors and many motorcycle carburettors.
  • Stainless steel columns indicate vacuum
  • No calibration or set-up required
  • High impact plastic casing and scale tubes - no glass
  • Dampers supplied to reduce fluctuations
  • Full instructions

Also suitable for car- and motorcycle engines which have the possibility of hooking up vacuum lines.

Replacement line can be found HERE.
Replacement, brass, vacuum take-off can be found HERE.

2 Column Manometer - Synchrometer Carbtune Pro

MANOMETER4
4 Column Manometer - Synchrometer Carbtune Pro

4 Column Manometer - Synchrometer Carbtune Pro

4 Column Manometer / Synchronometer.

This is the New Carbtune Pro, the essential tool for balancing multiple carburettors.

  • The column type scales give a superior resolution compared to dial type gauges
  • Comes complete with 4 x 5 mm and 4 x 6 mm brass adapters and 4 silicone rubber hoses.
  • The supplied adapters will suit the Dellorto DHLA and Weber DCOE carburetors and many motorcycle carburettors.
  • The stainless steel columns indicate the vacuum that each cylinder draws
  • There is no calibration or set-up required
  • Made out of a high-impact plastic casing and scale tubes - not glass to prevent breakage
  • The built-in dampers reduce fluctuations
  • Supplied with full instructions

Also suitable for car- and motorcycle engines which have the possibility of hooking up vacuum lines.

Replacement line can be found HERE.
Replacement, brass, vacuum take-off adapters can be found HERE.

4 Column Manometer - Synchrometer Carbtune Pro

9679
Brass vacuum take-off adapter for carburetors and manifolds

Brass vacuum take-off adapter for carburetors and manifolds

Vacuum take-off adapter for Dellorto DHLA and PHF.

Vacuum take off adapter, will fit standard take off point of DHLA carburetors, DHLB carburettors, and PHF carburettors.

Also fits the Weber DCOE series carburettors and Solex ADDHE.

 

Brass vacuum take-off adapter for carburetors and manifolds