trumpets_carburettors_rampipes

Trumpets and ram pipes for carburettors

On this page you will find trumpets, or air horns / ram pipes, for various carburettors.

!
W40/26
(18) 26 mm long Slot-In Trumpet for Weber DCOE40 carburetors

(18) 26 mm long Slot-In Trumpet for Weber DCOE40 carburetors

Top quality machined alloy slot-in trumpet for Weber DCOE40 carburetors.

Made from lightweight solid aluminum- no welding or gluing.

To suit Weber DCOE 40mm carburettors ONLY (!)

Please make sure that your DCOE's are suitable for slot-in trumpets as not all versions are!

26 mm long, from fitting face of carburetor to end of flare.

58 mm maximum diameter at the flared end.

When you equip your DCOE40's with these slide-in trumpets for the first time, you require the special tabs so secure the trumpets in place.
For your convenience, you can order these tabs right along with your trumpets by selecting them through the drop-box above.

Required quantity per carburettor: 2

This is number 18 in the drawing.

(18) 26 mm long Slot-In Trumpet for Weber DCOE40 carburetors

W40/30G
(18) 30 mm long Slot-In Trumpet with Gauze for Weber DCOE40 carburetors

(18) 30 mm long Slot-In Trumpet with Gauze for Weber DCOE40 carburetors

Top quality machined alloy slot-in trumpet for Weber DCOE40 carburetors.

The trumpet is made from lightweight solid aluminum - no welding or gluing.

To suit Weber DCOE 40 mm carburettors ONLY (!)

Please make sure that your DCOE's are suitable for slot-in trumpets as not all versions are!

30 mm long from fitting face of carburetor to end of flare

65 mm maximum diameter at the flared end

The domed gauze adds approximately 15 mm to the length of the trumpet thus making it approximately 45 mm in length from the face of the carburetor.

When you equip your DCOE40's with these slide-in trumpets for the first time, you require the special tabs so secure the trumpets in place.
For your convenience, you can order these tabs right along with your trumpets by selecting them through the drop-box above.

Required quantity per carburettor: 2

This is number 18 in the drawing.

(18) 30 mm long Slot-In Trumpet with Gauze for Weber DCOE40 carburetors

8257
43 mm long bolt-on trumpet for 40mm carburetors

43 mm long bolt-on trumpet for 40mm carburetors

Top quality machined alloy bolt-on trumpet for 40mm diameter carburetors.

These trumpets measure 43mm in total length.

Diameter at the flared end is some 57mm.

They will fit the following carburetors:

  • Dellorto DHLA40
  • Dellorto DRLA40
  • Weber DCOE40
  • Weber IDF40
  • Solex, SK and DCOW carburetors with a 40mm bore
  • Throttle bodies with 65mm stud centers and 40mm bore.

Can be excellently combined with our push-fit mesh trumpet gauzes gauze40.

43 mm long bolt-on trumpet for 40mm carburetors

8680
(44) 18 mm trumpet for Dellorto PHB and PHBE carburetors

(44) 18 mm trumpet for Dellorto PHB and PHBE carburetors

18 millimeter long trumpet for the Dellorto PHB and PHBE carburetor.

Black plastic.

Required quantity per carburettor: 1

This is item number 44 in the drawing.

 

 

(44) 18 mm trumpet for Dellorto PHB and PHBE carburetors

11248
(44) 30 mm trumpet for Dellorto PHB and PHBE carburetors

(44) 30 mm trumpet for Dellorto PHB and PHBE carburetors

30 millimeter long trumpet for the Dellorto PHB and PHBE carburetor.

Black plastic.

Required quantity per carburettor: 1

This is item number 44 in the drawing.

 

 

(44) 30 mm trumpet for Dellorto PHB and PHBE carburetors

3100
Aluminum Trumpet for Dellorto PHBG carburetors

Aluminum Trumpet for Dellorto PHBG carburetors

Screw-on aluminum trumpet for the Dellorto PHBG series carburettors with an external thread size of M32 x 1.25mm.

Dimensions:

  • Overall length: 66 mm
  • Width: 40 mm at the widest point

Required quantity per carburettor: 1

This item is NOT shown in the drawing.

Manufactured from a solid billet of aluminium.

Aluminum Trumpet for Dellorto PHBG carburetors

9543
(73) 55 mm trumpet for Dellorto PHBH carburetors

(73) 55 mm trumpet for Dellorto PHBH carburetors

55 millimeter long trumpet for the Dellorto PHBH carburetors.

Grey plastic.

42 mm threaded connection.

Required quantity per carburettor: 1

This is item number 73 in the drawing.

(73) 55 mm trumpet for Dellorto PHBH carburetors

8680
(76) 18 mm trumpet for Dellorto PHF carburetors

(76) 18 mm trumpet for Dellorto PHF carburetors

18 millimeter long trumpet for the Dellorto PHF carburetor.

Black plastic.

Required quantity per carburettor: 1

This is item number 76 in the drawing.

 

(76) 18 mm trumpet for Dellorto PHF carburetors

11248
(77) 30 mm trumpet for Dellorto PHF carburetors

(77) 30 mm trumpet for Dellorto PHF carburetors

30 millimeter long trumpet for the Dellorto PHF carburetor.

Black plastic.

Required quantity per carburettor: 1

This is item number 77 in the drawing.

 

(77) 30 mm trumpet for Dellorto PHF carburetors

PHMTRUMPET36/G
(94) 36 mm Trumpet with Gauze for Dellorto PHM carburetors

(94) 36 mm Trumpet with Gauze for Dellorto PHM carburetors

Trumpet with Gauze for Dellorto PHM carburetors.

Machined from 1 piece aluminum in Germany!

Fitted with fixed, coarse, gauze.

Trumpet Length: 36 mm.

Will fit PHM carburettors with a 52 mm male intake thread.

The gauze adds approximately 18 mm to the trumpet length.

The diameter of the flare at the gauze end is circa 75 mm.

Required quantity per carburettor: 1

This is item number 94 in the drawing.

(94) 36 mm Trumpet with Gauze for Dellorto PHM carburetors

PHMTRUMPET45/G
(94) 45 mm Trumpet with Gauze for Dellorto PHM carburetors

(94) 45 mm Trumpet with Gauze for Dellorto PHM carburetors

Trumpet with Gauze for Dellorto PHM carburetors.

Machined from 1 piece aluminum in Germany!

Fitted with fixed, coarse, gauze.

Trumpet Length: 45 mm.

Will fit PHM carburettors with a 52 mm male intake thread.

The gauze adds approximately 18 mm to the trumpet length.

The diameter of the flare at the gauze end is circa 75 mm.

Required quantity per carburettor: 1

This is item number 94 in the drawing.

(94) 45 mm Trumpet with Gauze for Dellorto PHM carburetors

PHMTRUMPET70/G
(94) 70 mm Trumpet with Gauze for Dellorto PHM carburetors

(94) 70 mm Trumpet with Gauze for Dellorto PHM carburetors

Trumpet with Gauze for Dellorto PHM carburetors.

Machined from 1 piece aluminum in Germany!

Fitted with fixed, coarse, gauze.

Trumpet Length: 70 mm.

Will fit PHM carburettors with a 52 mm male intake thread.

The gauze adds approximately 18 mm to the trumpet length.

The diameter of the flare at the gauze end is circa 75 mm.

Required quantity per carburettor: 1

This is item number 94 in the drawing.

(94) 70 mm Trumpet with Gauze for Dellorto PHM carburetors

2453
Aluminum Trumpet for Dellorto SS1 25 - 30 carburetors

Aluminum Trumpet for Dellorto SS1 25 - 30 carburetors

Screw-on aluminum trumpet for the Dellorto SS1 25 - 30 series carburetors with an internal thread size of M34 x 1.25mm.

Dimensions:

  • Overall length: 55 mm
  • Width: 48 mm at the widest point

Required quantity per carburettor: 1

This item is NOT shown in the drawing.

Manufactured from a solid billet of aluminium.

Aluminum Trumpet for Dellorto SS1 25 - 30 carburetors

2993
(50) Trumpet for the Dellorto UA and MA carburettors

(50) Trumpet for the Dellorto UA and MA carburetors

Screw-on trumpet for the Dellorto UA and MA series carburettors with an external thread size of M27 x 1.25mm.

Measures 56 mm in overall length and 40 mm at the widest point.

Required quantity per carburettor: 1

This is item number 50 in the drawing.

Manufactured from a solid billet of aluminium.

(50) Trumpet for the Dellorto UA and MA carburetors

3100
Aluminum Trumpet for the Dellorto UB and MB carburetors

Aluminum Trumpet for the Dellorto UB and MB carburetors

Screw-on aluminum trumpet for the Dellorto UB and MB carburetors with an external thread size of M32 x 1.25mm.

Dimensions:

  • Overall length: 65 mm
  • Width: 40 mm at the widest point

Required quantity per carburettor: 1

This item is NOT shown in the drawing.

Manufactured from a solid billet of aluminium.

Aluminum Trumpet for the Dellorto UB and MB carburetors

MCT02
50 mm Trumpet with Gauze for Dellorto UB MB PHBG and VHB 20 - 26 carburetors

50 mm Trumpet with Gauze for Dellorto UB MB PHBG and VHB 20 - 26 carburetors

Screw-on aluminum trumpet for Dellorto carburetors with an external thread size of M32 x 1.25mm.

Fit the following carburetors:

  • Dellorto UB
  • Dellorto MB
  • Dellorto PHBG
  • Dellorto VHB 20-26

Please verify that your carburetor has the correct thread size and type.

Dimensions:

  • Trumpet length: 50 mm
  • Gauze length: 15 mm
  • Total length: 65 mm
  • Width: 65 mm at the widest point

Required quantity per carburettor: 1

This item is NOT shown in the drawing.

Manufactured from a solid billet of aluminium with crimped-on Gauze filter.

50 mm Trumpet with Gauze for Dellorto UB MB PHBG and VHB 20 - 26 carburetors

3100
Aluminum Trumpet for Dellorto VHB 20 - 27 carburetors

Aluminum Trumpet for Dellorto VHB 20 - 27 carburetors

Screw-on aluminum trumpet for the Dellorto VHB 20 - 27 series carburetors with an external thread size of M32 x 1.25mm.

Dimensions:

  • Overall length: 65 mm
  • Width: 40 mm at the widest point

Required quantity per carburettor: 1

This item is NOT shown in the drawing.

Manufactured from a solid billet of aluminium.

Aluminum Trumpet for Dellorto VHB 20 - 27 carburetors

2453
Aluminum Trumpet for Dellorto VHB 27 - 30 carburetors

Aluminum Trumpet for Dellorto VHB 27 - 30 carburetors

Screw-on aluminum trumpet for the Dellorto VHB 27 - 30 series carburetors with an internal thread size of M34 x 1.25mm.

Dimensions:

  • Overall length: 55 mm
  • Width: 48 mm at the widest point

Required quantity per carburettor: 1

This item is NOT shown in the drawing.

Manufactured from a solid billet of aluminium.

Aluminum Trumpet for Dellorto VHB 27 - 30 carburetors