Throttle Position Sensors
Throttle Position Sensors

Throttle Position Sensors

On this page you will find throttle position sensors to hook your Weber DCOE or Dellorto DHLA carburettors up to an Alpha Injection System.

You can download the fitting instructions (in English) HERE.

Throttle Position Sensors

!
WC9990290200
Throttle Position Sensor TPS for Dellorto DHLA carburettors

Throttle Position Sensor TPS for Dellorto DHLA carburetors

Throttle Position Sensor (or TPS), suitable for the whole Dellorto DHLA range (40, 45 and 48 versions) to suit the Alpha Injection System.

The kits for the Weber DCOE, Weber DCO/SP and the Dellorto DHLA are basically the same apart from the carburettor mounting bracket which is specific to each carburettor type.

You can download the fitting instruction (in English) HERE.

Individual parts for these sensors can be found HERE.

This set contains all the parts needed at the "carburettor end".

In order to connect this set to your wiring loom, you need a connector kit which you can order separately or directly along with this set.

Throttle Position Sensor TPS for Dellorto DHLA carburetors

WC9990266000
Throttle Position Sensor TPS for Weber DCOE 40 and 45 carburetors

Throttle Position Sensor TPS for Weber DCOE 40 and 45 carburetors

Throttle Position Sensor (or TPS), suitable for the Weber DCOE40 and DCOE45 to suit the Alpha Injection System.

The kits for the Weber DCOE, Weber DCO/SP and the Dellorto DHLA are basically the same apart from the carburettor mounting bracket which is specific to each carburettor type.

You can download the fitting instruction (in English) HERE.

Individual parts for these sensors can be found HERE.

This set contains all the parts needed at the "carburetor end".

In order to connect this set to your wiring loom, you need a connector kit which you can order separately or directly along with this set.

Throttle Position Sensor TPS for Weber DCOE 40 and 45 carburetors

99902.668
Throttle Position Sensor TPS for Weber DCO/SP 48 carburetors

Throttle Position Sensor TPS for Weber DCO/SP 48 carburetors

Throttle Position Sensor (or TPS), suitable for the Weber DCO / SP 48 to suit the Alpha Injection System.

The kits for the Weber DCOE, Weber DCO/SP and the Dellorto DHLA are basically the same apart from the carburettor mounting bracket which is specific to each carburettor type.

You can download the fitting instruction (in English) HERE.

Individual parts for these sensors can be found HERE.

This set contains all the parts needed at the "carburettor end".

In order to connect this set to your wiring loom, you need a connector kit which you can order separately or directly along with this set.

Throttle Position Sensor TPS for Weber DCO/SP 48 carburetors

TPSCONNECTORKIT
Connector Kit for Throttle Position Sensor TPS

Connector Kit for Throttle Position Sensor TPS

This is a complete kit to connect your wiring loom to the Alpha Throttle Position Sensor (or TPS).

It consist of:

  • 1 x connector block
  • 3 x connector pins
  • 1 x cable boot

You can also order these parts individually.

Connector Kit for Throttle Position Sensor TPS

WC99901.669
Connector Block for Throttle Position Sensor TPS

Connector Block for Throttle Position Sensor TPS

This is the connector block that connects your wiring loom to the Alpha Throttle Position Sensor (or TPS).

Please note that you will need 3 connector pins for the individual wires.

In order to hook the TPS up on your system, you need a complete connector set consisting of:

  • 1 x connector block
  • 3 x connector pins
  • 1 x cable boot

This here is the connector block only!

Connector Block for Throttle Position Sensor TPS

WC99902.047
Connector Pin for Connector Block for Throttle Position Sensor TPS

Connector Pin for Connector Block for Throttle Position Sensor TPS

This is a connector pin to connect the individual wires of your wiring loom to the connector block which in turn connects to the Alpha Throttle Position Sensor (or TPS).

Please note that you will need 3 of these connector pins in total to make a first-time connection.

In order to hook the TPS up on your system, you need a complete connector set consisting of:

  • 1 x connector block
  • 3 x connector pins
  • 1 x cable boot

This here is one (1) connector pin only!

Connector Pin for Connector Block for Throttle Position Sensor TPS

WC99901.757
Cable Boot for Connector Block for Throttle Position Sensor TPS

Cable Boot for Connector Block for Throttle Position Sensor TPS

This is a rubber cable boot to protect the wires that go into the connector block of the Alpha Throttle Position Sensor (or TPS).

In order to hook the TPS up on your system, you need a complete connector set consisting of:

  • 1 x connector block
  • 3 x connector pins
  • 1 x cable boot

This here is the cable boot only!

Cable Boot for Connector Block for Throttle Position Sensor TPS

WC9990290100
Mounting Bracket for Throttle Position Sensor TPS on Dellorto DHLA carburettors

Mounting Bracket for Throttle Position Sensor TPS on Dellorto DHLA carburetors

This is the mounting bracket for the Throttle Position Sensor (or TPS) on the early Dellorto DHLA carburetors with "open" idle screws.

Please note that you might have to, slightly, modify this bracket when using it on the DHLA40E and later versions. This due to the position of the idle screw.

 

 

Mounting Bracket for Throttle Position Sensor TPS on Dellorto DHLA carburettors

WC9990265400
Mounting Bracket for Throttle Position Sensor TPS on Weber DCOE carburetors

Mounting Bracket for Throttle Position Sensor TPS on Weber DCOE carburetors

This is the mounting bracket for the Throttle Position Sensor (or TPS) on the Weber DCOE carburetors.

 

 

Mounting Bracket for Throttle Position Sensor TPS on Weber DCOE carburetors

WC58480.02601
Potentiometer Support Plate for Throttle Position Sensor TPS

Potentiometer Support Plate for Throttle Position Sensor TPS

This is the support plate for the potentio meter as used in our Throttle Position Sensor (or TPS).

It suits both the version for the Weber DCOE as well as the version for the Dellorto DHLA carburators.

Potentiometer Support Plate for Throttle Position Sensor TPS

WC99902.655
Spindle Lever for Throttle Position Sensor TPS

Spindle Lever for Throttle Position Sensor TPS

This is the spindle lever is that is mounted on the spindle of the carburettor and activates the Throttle Position Sensor (or TPS).

It suits both the version for the Weber DCOE as well as the version for the Dellorto DHLA carburetors.

 

Spindle Lever for Throttle Position Sensor TPS