Carburettor parts that we expect to be arriving anytime soon
Carburettor parts that we expect to be arriving anytime soon

Expected soon

Carburettor parts that we expect to be arriving anytime soon.

Carburettor parts that we expect to be arriving anytime soon

!
PMS138J
Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Taunus 2600 V6 - PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Taunus 2600 V6 - PMS138J

Service kit for the Solex 32-35 EEIT and Pierburg 32-35EEIT carburetor as used on, amongst others, the:

  • Ford Taunus 2600 V6 - 1998 cc

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Various gaskets
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers
  • 2 x Idle Jet - Size 47.5
  • 2 x Main Jet - Size 130

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Taunus 2600 V6 - PMS138J

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the middle of September.
Supply will be limited so secure yours NOW.

PMS138J
Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Taunus 2000 V6 - PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Taunus 2000 V6 - PMS138J

Service kit for the Solex 32-35 EEIT and Pierburg 32-35EEIT carburetor as used on, amongst others, the:

  • Ford Taunus 2000 V6 - 1998 cc

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Various gaskets
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers
  • 2 x Idle Jet - Size 47.5
  • 2 x Main Jet - Size 130

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Taunus 2000 V6 - PMS138J

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the middle of September.
Supply will be limited so secure yours NOW.

PMS138J
Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Granada 2600 V6 - PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Granada 2600 V6 - PMS138J

Service kit for the Solex 32-35 EEIT and Pierburg 32-35EEIT carburetor as used on, amongst others, the:

  • Ford Granada 2600 V6 - 1998 cc

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Various gaskets
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers
  • 2 x Idle Jet - Size 47.5
  • 2 x Main Jet - Size 130

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Granada 2600 V6 - PMS138J

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the middle of September.
Supply will be limited so secure yours NOW.

PMS138J
Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Granada 2300 V6 - PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Granada 2300 V6 - PMS138J

Service kit for the Solex 32-35 EEIT and Pierburg 32-35EEIT carburetor as used on, amongst others, the:

  • Ford Granada 2300 V6 - 1998 cc

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Various gaskets
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers
  • 2 x Idle Jet - Size 47.5
  • 2 x Main Jet - Size 130

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Granada 2300 V6 - PMS138J

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the middle of September.
Supply will be limited so secure yours NOW.

PMS138J
Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Taunus 2300 V6 - PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Taunus 2300 V6 - PMS138J

Service kit for the Solex 32-35 EEIT and Pierburg 32-35EEIT carburetor as used on, amongst others, the:

  • Ford Taunus 2300 V6 - 1998 cc

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Various gaskets
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers
  • 2 x Idle Jet - Size 47.5
  • 2 x Main Jet - Size 130

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Taunus 2300 V6 - PMS138J

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the middle of September.
Supply will be limited so secure yours NOW.

PMS138J
Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor - PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor - PMS138J

Service kit for the Solex 32-35 EEIT and Pierburg 32-35EEIT carburetor.

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Various gaskets
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers
  • 2 x Idle Jet - Size 47.5
  • 2 x Main Jet - Size 130

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor - PMS138J

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the middle of September.
Supply will be limited so secure yours NOW.

PMS138J
Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Granada 2000 V6 - PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Granada 2000 V6 - PMS138J

Service kit for the Solex 32-35 EEIT and Pierburg 32-35EEIT carburetor as used on, amongst others, the:

  • Ford Granada 2000 V6 - 1998 cc

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Various gaskets
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers
  • 2 x Idle Jet - Size 47.5
  • 2 x Main Jet - Size 130

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Granada 2000 V6 - PMS138J

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the middle of September.
Supply will be limited so secure yours NOW.

PMS138J
Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Capri MKII 2000 - PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Capri MKII 2000 - PMS138J

Service kit for the Solex 32-35 EEIT and Pierburg 32-35EEIT carburetor as used on, amongst others, the:

  • Ford Capri GL MKII 2000 V6 - 1998 cc
  • Ford Capri GT MKII 2000 V6 - 1998 cc
  • Ford Capri S MKII 2000 V6 - 1998 cc

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Various gaskets
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers
  • 2 x Idle Jet - Size 47.5
  • 2 x Main Jet - Size 130

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Capri MKII 2000 - PMS138J

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the middle of September.
Supply will be limited so secure yours NOW.

PMS114/1
Elaborate Rebuild Kit for Solex 34 PBISA 5 carburetors for Peugeot 305 - PMS114/1

Elaborate Rebuild Kit for Solex 34 PBISA 5 carburetors for Peugeot 305 - PMS114/1

Elaborate Service kit for the Solex 34 PBISA 5 carburetors as used on, amongst others the:

  • Peugeot 305 GL - XL5 engine - 1290 cc
  • Peugeot 305 GR - XL5 engine - 1290 cc

This set contains the following parts from our Basic Rebuild Kit to service 1 carburettor:

  • Needle Valve assembly; size 1.5 - Number 5 in the drawing
  • Pump Diaphragm - Number 11 in the drawing
  • Top Cover Gasket - Number 22 in the drawing
  • Flexible (Nitrile) Pump Jet Gasket - Number 41 in the drawing
  • Throttle Body to Spacer Gasket - Number 42 in the drawing
  • Throttle Body to Manifold Gasket - Number 43 in the drawing
  • Various Copper Washers

with additionally:

  • Idle jet - Size 50 - Number 6 in the drawing
  • Main jet - Size 135 - Number 18 in the drawing

The exploded view drawing of the Solex PBISA can be found HERE.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS114/1

Elaborate Rebuild Kit for Solex 34 PBISA 5 carburetors for Peugeot 305 - PMS114/1

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the middle of September.
Supply will be limited so secure yours NOW.

PMS114/1
Elaborate Rebuild Kit for Solex 34 PBISA 3-4-5 carburetors for Peugeot 304 - PMS114/1

Elaborate Rebuild Kit for Solex 34 PBISA 3-4-5 carburetors for Peugeot 304 - PMS114/1

Elaborate Service kit for the Solex 34 PBISA 3-4-5 carburetors as used on, amongst others the:

  • Peugeot 304 - XL3 engine - 1130 cc

This set contains the following parts from our Basic Rebuild Kit to service 1 carburettor:

  • Needle Valve assembly; size 1.5 - Number 5 in the drawing
  • Pump Diaphragm - Number 11 in the drawing
  • Top Cover Gasket - Number 22 in the drawing
  • Flexible (Nitrile) Pump Jet Gasket - Number 41 in the drawing
  • Throttle Body to Spacer Gasket - Number 42 in the drawing
  • Throttle Body to Manifold Gasket - Number 43 in the drawing
  • Various Copper Washers

with additionally:

  • Idle jet - Size 50 - Number 6 in the drawing
  • Main jet - Size 135 - Number 18 in the drawing

The exploded view drawing of the Solex PBISA can be found HERE.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS114/1

Elaborate Rebuild Kit for Solex 34 PBISA 3-4-5 carburetors for Peugeot 304 - PMS114/1

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the middle of September.
Supply will be limited so secure yours NOW.

PMS114/1
Elaborate Rebuild Kit for Solex 34 PBISA 5 carburetors for Peugeot 204 - PMS114/1

Elaborate Rebuild Kit for Solex 34 PBISA 5 carburetors for Peugeot 204 - PMS114/1

Elaborate Service kit for the Solex 34 PBISA 5 carburetors as used on, amongst others the:

  • Peugeot 204 - XK5 engine - 1130 cc

This set contains the following parts from our Basic Rebuild Kit to service 1 carburettor:

  • Needle Valve assembly; size 1.5 - Number 5 in the drawing
  • Pump Diaphragm - Number 11 in the drawing
  • Top Cover Gasket - Number 22 in the drawing
  • Flexible (Nitrile) Pump Jet Gasket - Number 41 in the drawing
  • Throttle Body to Spacer Gasket - Number 42 in the drawing
  • Throttle Body to Manifold Gasket - Number 43 in the drawing
  • Various Copper Washers

with additionally:

  • Idle jet - Size 50 - Number 6 in the drawing
  • Main jet - Size 135 - Number 18 in the drawing

The exploded view drawing of the Solex PBISA can be found HERE.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS114/1

Elaborate Rebuild Kit for Solex 34 PBISA 5 carburetors for Peugeot 204 - PMS114/1

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the middle of September.
Supply will be limited so secure yours NOW.

PMS114/1
Elaborate Rebuild Kit for Solex 34 PBISA carburetors for Fiat Ducato - PMS114/1

Elaborate Rebuild Kit for Solex 34 PBISA carburetors for Fiat Ducato - PMS114/1

Elaborate Service kit for the Solex 34 PBISA carburetors as used on, amongst others the:

  • Fiat Ducato Van - 1976 cc
  • Fiat Ducato Van - 1971 cc

This set contains the following parts from our Basic Rebuild Kit to service 1 carburettor:

  • Needle Valve assembly; size 1.5 - Number 5 in the drawing
  • Pump Diaphragm - Number 11 in the drawing
  • Top Cover Gasket - Number 22 in the drawing
  • Flexible (Nitrile) Pump Jet Gasket - Number 41 in the drawing
  • Throttle Body to Spacer Gasket - Number 42 in the drawing
  • Throttle Body to Manifold Gasket - Number 43 in the drawing
  • Various Copper Washers

with additionally:

  • Idle jet - Size 50 - Number 6 in the drawing
  • Main jet - Size 135 - Number 18 in the drawing

The exploded view drawing of the Solex PBISA can be found HERE.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS114/1

Elaborate Rebuild Kit for Solex 34 PBISA carburetors for Fiat Ducato - PMS114/1

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the middle of September.
Supply will be limited so secure yours NOW.

PMS114/1
Elaborate Rebuild Kit for Solex 34 PBISA carburetors - PMS114/1

Elaborate Rebuild Kit for Solex 34 PBISA carburetors - PMS114/1

Elaborate Service kit for the Solex 34 PBISA carburetors.

This set contains the following parts from our Basic Rebuild Kit to service 1 carburettor:

  • Needle Valve assembly; size 1.5 - Number 5 in the drawing
  • Pump Diaphragm - Number 11 in the drawing
  • Top Cover Gasket - Number 22 in the drawing
  • Flexible (Nitrile) Pump Jet Gasket - Number 41 in the drawing
  • Throttle Body to Spacer Gasket - Number 42 in the drawing
  • Throttle Body to Manifold Gasket - Number 43 in the drawing
  • Various Copper Washers

with additionally:

  • Idle jet - Size 50 - Number 6 in the drawing
  • Main jet - Size 135 - Number 18 in the drawing

The exploded view drawing of the Solex PBISA can be found HERE.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS114/1

Elaborate Rebuild Kit for Solex 34 PBISA carburetors - PMS114/1

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the middle of September.
Supply will be limited so secure yours NOW.

44PHN
Service Kit for Solex 44 PHN carburetors for Volvo Penta Marine - 44PHN

Service Kit for Solex 44 PHN carburetors for Volvo Penta Marine - 44PHN

Service kit for the Solex 44 PHN carburetor as used on, amongst others, Volvo Penta Marine Engines:

  • AQ120B
  • AQ140A
  • BB140A

Contains the parts to service 1 carburettor.

Consists of the following parts:

  • Various gaskets
  • Pump diaphragm
  • Needle Valve
  • Various copper washers
  • Various aluminum washers

For the exact contents, please see the photograph.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: 44PHN

Service Kit for Solex 44 PHN carburetors for Volvo Penta Marine - 44PHN

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse around the middle of September.
Supply will be limited so secure yours NOW.

PMS115
Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 404 - PMS115

Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 404 - PMS115

Service kit for the Solex 32 PBICA carburetors as used on, amongst others, the:

  • 1962 - 1972 Peugeot 404 XC5 - 1618 cc
  • 1970 - 1975 Peugeot 404 XC7 - 1618 cc
  • 1966 - 1975 Peugeot 404 Automatic XC7 - 1618 cc

This rebuild kit contains, amongst others, the following parts to service 1 carburettor:

  • Top Cover Gasket
  • Manifold Gasket
  • Pump Diaphragm
  • Flexible Pump Gasket
  • Flexible Pump Jet Gasket
  • Needle Valve assembly; size 1.7
  • Various Fiber Washers
  • Various Copper Washers

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 404 - PMS115

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the middle of September.
Supply will be limited so secure yours NOW.

PMS115
Rebuild Kit for Solex 32 PBICA carburetors - PMS115

Rebuild Kit for Solex 32 PBICA carburetors - PMS115

Service kit for the Solex 32 PBICA carburetors.

This rebuild kit contains, amongst others, the following parts to service 1 carburettor:

  • Top Cover Gasket
  • Manifold Gasket
  • Pump Diaphragm
  • Flexible Pump Gasket
  • Flexible Pump Jet Gasket
  • Needle Valve assembly; size 1.7
  • Various Fiber Washers
  • Various Copper Washers

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex 32 PBICA carburetors - PMS115

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the middle of September.
Supply will be limited so secure yours NOW.

PMS115
Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 504 - PMS115

Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 504 - PMS115

Service kit for the Solex 32 PBICA carburetors as used on, amongst others, the:

  • 1968 - 1975 Peugeot 504 XM - XM7 - 1796 cc

This rebuild kit contains, amongst others, the following parts to service 1 carburettor:

  • Top Cover Gasket
  • Manifold Gasket
  • Pump Diaphragm
  • Flexible Pump Gasket
  • Flexible Pump Jet Gasket
  • Needle Valve assembly; size 1.7
  • Various Fiber Washers
  • Various Copper Washers

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 504 - PMS115

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the middle of September.
Supply will be limited so secure yours NOW.

PMS115
Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 403 - PMS115

Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 403 - PMS115

Service kit for the Solex 32 PBICA carburetors as used on, amongst others, the:

  • 1955 - 1962 Peugeot 403 - 1290 cc
  • 1955 - 1962 Peugeot 403 - 1468 cc

This rebuild kit contains, amongst others, the following parts to service 1 carburettor:

  • Top Cover Gasket
  • Manifold Gasket
  • Pump Diaphragm
  • Flexible Pump Gasket
  • Flexible Pump Jet Gasket
  • Needle Valve assembly; size 1.7
  • Various Fiber Washers
  • Various Copper Washers

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 403 - PMS115

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the middle of September.
Supply will be limited so secure yours NOW.

Solex
PMS115
Rebuild Kit for Solex 32 PBICA carburetors for Peugeot J7 E & F - PMS115

Rebuild Kit for Solex 32 PBICA carburetors for Peugeot J7 E & F - PMS115

Service kit for the Solex 32 PBICA carburetors as used on, amongst others, the:

  • 1970 - 1975 Peugeot J7 E 1600 - 1618 cc
  • 1970 - 1975 Peugeot J7 F 1800 - 1796 cc

This rebuild kit contains, amongst others, the following parts to service 1 carburettor:

  • Top Cover Gasket
  • Manifold Gasket
  • Pump Diaphragm
  • Flexible Pump Gasket
  • Flexible Pump Jet Gasket
  • Needle Valve assembly; size 1.7
  • Various Fiber Washers
  • Various Copper Washers

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex 32 PBICA carburetors for Peugeot J7 E & F - PMS115

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the middle of September.
Supply will be limited so secure yours NOW.

MCT10
(73) Aluminum 60 mm trumpet for Dellorto PHBH carburetors - MCT10

(73) Aluminum 60 mm trumpet for Dellorto PHBH carburetors - MCT10

Aluminum 60 mm trumpet for Dellorto PHBH carburetors.

Milled from a solid piece of aluminum with a crimped-on gauze.

M42 x 1.25 threaded connection.

The gauze adds some 15 mm to the length of the trumpet bringing the overall length to some 45 mm.

The diameter at the gauze end is some 75 mm.

Please note that in some pictures, the trumpet is depicted on a carburetor.
This carburetor is NOT included in the price.

Required quantity per carburettor: 1

This is item number 73 in the drawing.

Part Number: MCT10

(73) Aluminum 60 mm trumpet for Dellorto PHBH carburetors - MCT10

PLEASE NOTE:
This trumpet is currently on order from our supplier.
We expect it to arrive at our warehouse by the middle of September.
Supply will be limited so secure yours NOW.

HOLLEY128021KIT
Holley 12 Volt Vanes-Type Fuel Pump Kit with Pressure Regulator

Holley 12 Volt Vanes-Type Fuel Pump Kit with Pressure Regulator

Holley 12 Volt Vanes-Type Fuel Pump Kit with Pressure Regulator.

This is the famous Holley Blue Label Vanes Fuel pump.

It is the perfect alternative to the more usual plunger / piston and Solid-State pumps.

Thanks to its vanes-design, there is virtually no pulsation and less wear and tear.

It comes complete with suitable pressure regulator, capable of handling pressures up to 14 PSI.

Pump specification:

  • Current draw: 3 Amps
  • Voltage: 12 Volts
  • Flow rate (free): 110 Gallons / 400 Liters per hour
  • Flow rate at 9 PSI (0.6 Bar): 88 Gallons / 330 Liters per hour
  • Maximum Pressure: 14 PSI / 0.95 Bar
  • Includes an externally accessible pressure regulator
  • Weight: 3 Lbs / 1.36 KG
  • Inlet- and Outlet-Size: 3/8" NPT

Suitable for many different fuels, including modern ones, but NOT suited for Methanol or Ethanol based fuels.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

When using an electrical fuel pump, we also advise you to equip your vehicle with an Inertia Fuel Cut-Off Switch as a safety precaution.

As specified above, this pump uses 3/8th NPT thread for its couplings.

This thread is not widely available in all corners of the earth.
For this reason we offer suitable fuel unions HERE.

In total you need 5 unions (2 on the pump and 3 on the regulator).

To make life even easier for you, you can order 8 mm straight fuel unions right along with your pump by selecting them through the drop-box above.

When ordered separately, these 5 unions would cost US$ 29.75.
When ordered along with the pump, we can discount them to US$ 25.00 for the set of 5.

Holley 12 Volt Vanes-Type Fuel Pump Kit with Pressure Regulator

PLEASE NOTE:
These pumps are currently on order from our supplier.
We expect them to arrive at our warehouse by the end of September.
Supply will be limited so secure yours NOW.

KSK1455SS
Screws Set for Keihin Carburetors on Honda CB750 KZ Boldor 1978 - 1979

Screws Set for Keihin Carburetors on Honda CB750 KZ Boldor 1978 - 1979

Screws Set for Keihin Carburetors on the 1978 - 1979 Honda CB750 KZ Boldor motorcycles.

Often called a "bling set" as it does wonders for the appearance of your carbs but in actual fact it is of course intended to replace the, often maltreated and after 40 years pretty worn, Philips-head screws on your Keihin carburetors.

This kit contains the following for 4 carburettors:

  • 21 pcs. 4 mm screws of various lengths
  • 17 pcs 5 mm screws of various lengths
  • 8 pcs 6 mm screws of various lengths
  • 4 pcs brass float bowl drain plugs complete with o-ring

Although these carburetors were originally delivered on the above mentioned Honda CB750 KZ, they are often transplanted onto other bikes and engines so the range that these service kits might fit is much broader.

Alternatively, your bike might have been equipped with different carburettors during its life so please verify that the parts shown will fit your bike.

Screws Set for Keihin Carburetors on Honda CB750 KZ Boldor 1978 - 1979

PLEASE NOTE:
These pumps are currently on order from our supplier.
We expect them to arrive at our warehouse by the end of September.
Supply will be limited so secure yours NOW.

10305
(10) Genuine Viton-Tipped TURBO Needle Valve Assembly for Dellorto DRLA carburetors - 10305

(10) Genuine Viton-Tipped TURBO Needle Valve Assembly for Dellorto DRLA carburetors - 10305

Dellorto needle valve, seat and fiber washer for the DRLA carburetors on TURBO engines.

Genuine Dellorto part, Viton-tipped!

Only genuine Dellorto needles are marked with the diamond shaped "Inc" logo!

Available from our stock in size:

  • 170
  • 225

Required quantity per carburettor: 1

This is item number 10 in the drawing.

Dellorto Part Number: 10305

(10) Genuine Viton-Tipped TURBO Needle Valve Assembly for Dellorto DRLA carburetors - 10305

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the middle of September.
Supply will be limited so secure yours NOW.

47404.133
(30) Choke Diaphragm for Weber DAT Carburetors - 47407.133

(30) Choke Diaphragm for Weber DAT Carburetors - 47407.133

Choke Diaphragm for Weber DAT Carburetors.

Required quantity per carburettor: 1

This is numbers 30 in the drawing.

Weber Part Number: 47407.133

(30) Choke Diaphragm for Weber DAT Carburetors - 47407.133

Please note:
This diaphragm is currently on order from our supplier.
We expect it to arrive at our warehouse by the end of September.

47404.133
(30) Choke Diaphragm for Weber DATR Carburetors - 47407.133

(30) Choke Diaphragm for Weber DATR Carburetors - 47407.133

Choke Diaphragm for Weber DATR Carburetors.

Required quantity per carburettor: 1

This is numbers 30 in the drawing.

Weber Part Number: 47407.133

(30) Choke Diaphragm for Weber DATR Carburetors - 47407.133

Please note:
This diaphragm is currently on order from our supplier.
We expect it to arrive at our warehouse by the end of September.

47404.133
Choke Diaphragm for Weber DHTA Carburetors - 47407.133

Choke Diaphragm for Weber DHTA Carburetors - 47407.133

Choke Diaphragm for Weber DHTA Carburetors.

Required quantity per carburettor: 1

Weber Part Number: 47407.133

Choke Diaphragm for Weber DHTA Carburetors - 47407.133

Please note:
This diaphragm is currently on order from our supplier.
We expect it to arrive at our warehouse by the end of September.

47407.112
(30) Choke Diaphragm for Weber DIR Carburetors for Renault 5 Turbo - 47407.112

(30) Choke Diaphragm for Weber DIR Carburetors for Renault 5 Turbo - 47407.112

Choke diaphragm specifically for the Weber DIR carburetors as used on the Renault 5 Turbo.

Required quantity per carburettor: 1

This is item number 30 in the drawing.

Weber Part Number: 47407.112

 

(30) Choke Diaphragm for Weber DIR Carburetors for Renault 5 Turbo - 47407.112

Please note:
These diaphragms are currently on order from our supplier.
We expect them to arrive at our warehouse by the end of September.