Weber DIR Carburetor Parts
Weber DIR Carburetor Parts

Weber DIR Parts

Weber DIR carburetor parts.

Click HERE for an exploded view drawing of the Weber DIR carburettor.

On this page you will find all currently available parts for the Weber DIR series carburetors.

Please contact us by email if the part that you are looking for is not listed yet as there's a good chance that we can help you anyway.

Our Contact Page can be found HERE.

Weber DIR Carburetor Parts

!
74409
(7) Idle Jet for Weber DIR carburetors

(7) Idle Jet for Weber DIR carburetors

Idle (or progression) jet for the Weber DIR series carburetors.

Available from our stock in sizes:

  • 40
  • 45
  • 50
  • 52
  • 55

Other sizes are available on request. Please don't hesitate to contact us by email with your requirements, we'll gladly help you.

Required quantity per carburettor: 2

This is item number 7 in the drawing.

(7) Idle Jet for Weber DIR carburetors

47407.131
(11) Pump Diaphragm for Weber DIR Carburetors

(11) Pump Diaphragm for Weber DIR Carburetors

Pump diaphragm for the Weber DIR series carburetors.

Required quantity per carburettor: 1

This is item number 11 in the drawing.

 

 

 

 

(11) Pump Diaphragm for Weber DIR Carburetors

FR0426
Service Kit for Weber 32 DIR 41 carburetors for Alfa Romeo Alfasud 1200 TI

Service Kit for Weber 32 DIR 41 carburetors for Alfa Romeo Alfasud 1200 TI

Service kit for the Weber 32DIR41 series carburetors as, amongst others, used on the following cars:

  • Alfa Romeo Alfasud 1200 TI

Although these carburetors were originally specified for the above cars, they could have been transplanted onto other cars and engines so the range of vehicles that these service sets might fit is much broader.

Alternatively, it is very well possible that your car is no longer be equipped with the carburetor that it left the factory with.

So, we advise you to check carefully if the parts in the picture will fit your carburetor.

In some extreme cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please see the pictures for an example of the markings on a Weber 32 DIR carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Float chamber gasket
  • Base gasket
  • All other required gaskets
  • All required rubber (Viton) o-rings
  • All required copper washers
  • All required aluminum washers

This is a Carburetor City carburettor service set, Made in Italy to the highest standards.

Service Kit for Weber 32 DIR 41 carburetors for Alfa Romeo Alfasud 1200 TI

FR3736
Service Kit for Weber 32 DIR 51/250, 61/100, 61/250, 71/250 en 32 DATRA 7/100 carburetors for Alfasud TI and Alfa 33

Service Kit for Weber 32 DIR 51/250, 61/100, 61/250, 71/250 en 32 DATRA 7/100 carburetors for Alfasud TI and Alfa 33

Service Kit for Weber 32 DIR 51/250, 61/100, 61/250, 71/250 en 32 DATRA 7/100 carburetors for Alfasud TI and Alfa 33.

Service kit for the Weber 32 DIR and 32 DATRA series carburetors as used on, amongst others, the following cars:

  • Alfa Romeo Alfasud TI & QV - 1200
  • Alfa Romeo Alfasud TI & QV - 1300
  • Alfa Romeo Alfasud TI & QV - 1500
  • Alfa Romeo Alfasud Sprint - 1300
  • Alfa Romeo Alfa 33 - 1.3
  • Alfa Romeo Alfa 33 - 1.5

Although these carburetors were originally specified for the above cars, they could have been transplanted onto other cars and engines so the range of vehicles that these service sets might fit is much broader.

Alternatively, it is very well possible that your car is no longer be equipped with the carburetor that it left the factory with.

So, we advise you to check carefully if the parts in the picture will fit your carburetor.

In some extreme cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please see the pictures for an example of the markings on a Weber 32 DIR carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Choke Diaphragm
  • Float chamber gasket
  • Base gasket
  • All other required gaskets
  • All required rubber (Viton) o-rings
  • All required copper washers
  • All required aluminum washers

This is a Carburetor City carburettor service set, Made in Italy to the highest standards.

Service Kit for Weber 32 DIR 51/250, 61/100, 61/250, 71/250 en 32 DATRA 7/100 carburetors for Alfasud TI and Alfa 33

FR8729
Service Kit for Weber 32 DIR 71 - 81 - 91 - 150 - 151 - 250 carburetors for Alfa Romeo Alfasud and Alfa 33

Service Kit for Weber 32 DIR 71 - 81 - 91 - 150 - 151 - 250 carburetors for Alfa Romeo Alfasud and Alfa 33

Service kit for the Weber 32 DIR series carburetors as, amongst others, used on the following cars:

  • Alfa Romeo Alfasud TI - 1351 cc
  • Alfa Romeo Alfasud Sprint - 1351 + 1490 cc
  • Alfa Romeo Alfasud Super - 1286 + 1490 cc
  • Alfa Romeo Alfa 33 - 79 HP + 1350 cc

Although these carburetors were originally specified for the above cars, they could have been transplanted onto other cars and engines so the range of vehicles that these service sets might fit is much broader.

Alternatively, it is very well possible that your car is no longer be equipped with the carburetor that it left the factory with.

So, we advise you to check carefully if the parts in the picture will fit your carburetor.

In some extreme cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please see the pictures for an example of the markings on a Weber 32 DIR carburetor.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Choke Diaphragm
  • Float chamber gasket
  • Base gasket
  • All other required gaskets
  • All required rubber (Viton) o-rings
  • All required copper washers
  • All required aluminum washers

This is a Carburetor City carburettor service set, Made in Italy to the highest standards.

Service Kit for Weber 32 DIR 71 - 81 - 91 - 150 - 151 - 250 carburetors for Alfa Romeo Alfasud and Alfa 33

FR2232
Service Kit for Weber 32 DIR carburetors for Renault 5 TS

Service Kit for Weber 32 DIR carburetors for Renault 5 TS

Service Kit for Weber 32 DIR carburetors for the Renault 5 TS.

Service kit for the Weber 32DIR series carburetors as, amongst others, used on the following cars:

  • Renault 5 TS - 1289 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Float chamber gasket
  • Base gasket
  • All other required gaskets
  • All required rubber (Viton) o-rings
  • All required copper washers
  • All required aluminum washers

This is a Carburetor City carburetor service kit.

Service Kit for Weber 32 DIR carburetors for Renault 5 TS

PMW240
Service Kit for Weber 32 DIR carburetors for Renault 5 Alpine, 5 TS and 5 TX

Service Kit for Weber 32 DIR carburetors for Renault 5 Alpine, 5 TS and 5 TX

Service kit for the Weber 32 DIR 69 / 9700-58T / 8500-89 / 100 series carburetors as used on, amongst others, the:

  • Renault 5 Alpine (Atmospheric) - 1397 cc
  • Renault 5 TS - 1397 cc
  • Renault 5 TX (Automatic) - 1397 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor.

In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Plenum Gasket
  • 2 x Base Gasket
  • Float Chamber Gasket
  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Internal Fuel Filter
  • Rubber (Viton) o-rings
  • All required copper washers
  • Aluminum washer

This is a Carburetor City carburetor service kit.

Service Kit for Weber 32 DIR carburetors for Renault 5 Alpine, 5 TS and 5 TX

FR0720
Service Kit for Weber 32 DIR 75/100 carburetors for Renault 5 Alpine Turbo

Service Kit for Weber 32 DIR 75/100 carburetors for Renault 5 Alpine Turbo

Service Kit for Weber 32 DIR 75/100 carburetors as used on, amongst others, the:

  • Renault 5 Alpine Turbo

This 75/100 version of the Weber DIR was especially modified for Turbo-use on the Renault 5 and consequently, this kit contains a number of extra parts to properly services these carburetors.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Float chamber gasket
  • Base gasket
  • Isolator Block + gaskets
  • Choke Diaphragm
  • Throttle Shaft Seals
  • All other required gaskets
  • All required rubber (Viton) o-rings
  • All required copper washers
  • All required aluminum washers

This is a Carburetor City carburetor service set, Made in Italy to the highest standards.

Service Kit for Weber 32 DIR 75/100 carburetors for Renault 5 Alpine Turbo

FR9643
Service Kit for Weber 32 DIR carburetors for Renault 12 TS and 12 TR

Service Kit for Weber 32 DIR carburetors for Renault 12 TS and 12 TR

Service Kit for Weber 32 DIR 21 / 2305-21 / 2306-39T / 4500 carburetors as used on, amongst others, the:

  • Renault 12 TS and 12 TR

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Float chamber gasket
  • Base gasket
  • All other required gaskets
  • All required rubber (Viton) o-rings
  • All required aluminum washers

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Weber 32 DIR carburetors for Renault 12 TS and 12 TR

PMW240
Service Kit for Weber 32 DIR carburetors for Renault 12 TS (Automatic)

Service Kit for Weber 32 DIR carburetors for Renault 12 TS (Automatic)

Service kit for the following models of the Weber 32 DIR carburetor:

Weber 32 DIR 31:

  • Renault 12 TS - 1397 cc

Weber 32 DIR 69:

  • Renault 12 TS - 1289 cc
  • Renault 12 TS Automatic - 1289 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor.

In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Plenum Gasket
  • 2 x Base Gasket
  • Float Chamber Gasket
  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Internal Fuel Filter
  • Rubber (Viton) o-rings
  • All required copper washers
  • Aluminum washer

This is a Carburetor City carburetor service kit.

Service Kit for Weber 32 DIR carburetors for Renault 12 TS (Automatic)

FR8721
Service Kit for Weber 32 DIR 24/29 carburetors for Renault 15 TL and 15 TS

Service Kit for Weber 32 DIR 24/29 carburetors for Renault 15 TL and 15 TS

Service Kit for Weber 32DIR 24/29 carburetors as used on, amongst others, the:

  • Renault 15 TL
  • Renault 15 TS

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please see the pictures for an example of the markings on a Weber 32 DIR carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Float chamber gasket
  • Base gasket
  • All other required gaskets
  • All required rubber (Viton) o-rings
  • All required copper washers
  • All required aluminum washers

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Weber 32 DIR 24/29 carburetors for Renault 15 TL and 15 TS

PMW240
Service Kit for Weber 32 DIR carburetors for Renault 15 TS

Service Kit for Weber 32 DIR carburetors for Renault 15 TS

Service kit for the Weber 32 DIR carburetor as used on, amongst others, the:

  • Renault 15 TS - 1565 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor.

In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Plenum Gasket
  • 2 x Base Gasket
  • Float Chamber Gasket
  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Internal Fuel Filter
  • Rubber (Viton) o-rings
  • All required copper washers
  • Aluminum washer

This is a Carburetor City carburetor service kit.

Service Kit for Weber 32 DIR carburetors for Renault 15 TS

FR8721
Service Kit for Weber 32 DIR 24/29 carburetors for Renault 16 TS

Service Kit for Weber 32 DIR 24/29 carburetors for Renault 16 TS

Service Kit for Weber 32DIR 24/29 carburetors as used on, amongst others, the:

  • Renault 16 TS

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please see the pictures for an example of the markings on a Weber 32 DIR carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Float chamber gasket
  • Base gasket
  • All other required gaskets
  • All required rubber (Viton) o-rings
  • All required copper washers
  • All required aluminum washers

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Weber 32 DIR 24/29 carburetors for Renault 16 TS

PMW240
Service Kit for Weber 32 DIR carburetors for Renault 16 TL and Renault 16 TS

Service Kit for Weber 32 DIR carburetors for Renault 16 TL and Renault 16 TS

Service kit for the Weber 32 DIR 34 carburetor as used on, amongst others, the:

  • Renault 16 TL - 1565 cc
  • Renault 16 TS - 1565 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor.

In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Plenum Gasket
  • 2 x Base Gasket
  • Float Chamber Gasket
  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Internal Fuel Filter
  • Rubber (Viton) o-rings
  • All required copper washers
  • Aluminum washer

This is a Carburetor City carburetor service kit.

Service Kit for Weber 32 DIR carburetors for Renault 16 TL and Renault 16 TS

PMW240
Service Kit for Weber 32 DIR carburetors for Renault 17 TL

Service Kit for Weber 32 DIR carburetors for Renault 17 TL

Service kit for the Weber 32 DIR carburetor as used on, amongst others, the:

  • Renault 17 TL - 1565 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor.

In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Plenum Gasket
  • 2 x Base Gasket
  • Float Chamber Gasket
  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Internal Fuel Filter
  • Rubber (Viton) o-rings
  • All required copper washers
  • Aluminum washer

This is a Carburetor City carburetor service kit.

Service Kit for Weber 32 DIR carburetors for Renault 17 TL

PMW240
Service Kit for Weber 32 DIR carburetors for Renault 18 TS, 18 GTS and 18 GTL America

Service Kit for Weber 32 DIR carburetors for Renault 18 TS, 18 GTS and 18 GTL America

Service kit for the Weber 32 DIR carburetor as used on, amongst others, the:

  • Renault 18 TS - 1647 cc
  • Renault 18 GTS - 1647 cc
  • Renault 18 GTL America - 1647 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor.

In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Plenum Gasket
  • 2 x Base Gasket
  • Float Chamber Gasket
  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Internal Fuel Filter
  • Rubber (Viton) o-rings
  • All required copper washers
  • Aluminum washer

This is a Carburetor City carburetor service kit.

Service Kit for Weber 32 DIR carburetors for Renault 18 TS, 18 GTS and 18 GTL America

DIR32
Service Kit for Weber 32 DIR 109/102 en 105/100 for Volvo 340 and 360

Service Kit for Weber 32 DIR 109/102 en 105/100 for Volvo 340 and 360

Service kit for the Weber 32DIR series carburetors as used on the following models:

  • Volvo 340 L - DL - GL with 1397 cc engine
  • Volvo 360 1400

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Please compare your old parts carefully with the ones in the picture as there are many different versions of the Weber DIR carburetor. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please see the picture for an example of the markings on a Weber 32 DIR carburetor.

Contains all required parts to service 1 carburettor.

Consists, amongst others, of the following parts:

  • Pump Diaphragm
  • Complete needle valve (size 175)
  • Fuel Filter
  • Power Valve Diaphragm
  • Choke Diaphragm
  • Float chamber gasket
  • Base gasket
  • All other required gaskets
  • All required rubber (Viton) o-rings
  • All required copper washers
  • All required aluminum washers

Service Kit for Weber 32 DIR 109/102 en 105/100 for Volvo 340 and 360

HAYNES6231
The Haynes Manual on Carburettors

The Haynes Manual on Carburettors

The definitive DIY manual on automotive carburettors.

It covers the theory, specifications, fault diagnosis, repairs and service adjustments on the following carburettors:

  • Ford Motorcraft 1V
  • Ford Motorcraft Variable Venturi (VV)
  • Pierburg 1B1
  • Pierburg 1B3
  • Pierburg 2B5
  • Pierburg 2B6
  • Pierburg 2B7
  • Pierburg 2BE
  • Pierburg 2E2
  • Pierburg 2E3
  • Pierburg PDSI
  • Solex PDSI
  • Solex PIC-7
  • Solex BIS
  • Solex EEIT
  • Solex PBISA
  • Solex SEIA
  • Solex Z1
  • Solex Z10
  • Solex Z11
  • Weber DARA
  • Weber DFT
  • Weber DFTH
  • Weber DFTM
  • Weber DGAV
  • Weber DIR
  • Weber DMTE
  • Weber DMTL
  • Weber DRT
  • Weber DRTC
  • Weber IBSH
  • Weber ICEV
  • Weber ICH
  • Weber ICT
  • Weber TL
  • Weber TLA
  • Weber TLDE
  • Weber TLDR
  • Weber TLDM
  • Weber TLF
  • Weber TLM
  • Weber TLP

Some 400 pages that cover the adjusting, tuning and overhauling of the above mentioned carburetors.

Contains colour sections, step-by-step instructions and Haynes Hints.

Language: English

The Haynes Manual on Carburettors

flexoid5xa4
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.

Almost a "First Aid Kit" for the home mechanic!

This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.

You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.

The sheets are made of cellulose based, plasticised gelatin-impregnated material.

The sheets are of the following thickness:

  • 0.15 MM
  • 0.25 MM
  • 0.4 MM
  • 0.8 MM
  • 1.6 MM

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

GREENFUEL8MM-50cm
Italian style clear green fuel line hose with 8 mm inner diameter

Italian style clear green fuel line hose with 8 mm inner diameter

Italian style clear green fuel line hose with 8 mm inner diameter.

This is the perfect finisher for a successful restoration!

This fuel hose has an 8 mm inner diameter and 11 mm outer diameter.

It is sold in lengths of 50 cm (19.7 inch).

When ordering multiple lengths, we will do our utmost to supply that as 1 piece.

This hose uses 10 - 12 mm jubilee clips.

Alternatively, this hose simply looks great when used with the "Endless band & Buckle" hose clamps like in the photo.

Please note:
This hose is NOT E10 resistant.
Do not use this hose if you are not able to avoid using Ethanol-containing fuels.

Italian style clear green fuel line hose with 8 mm inner diameter

gatestextiel8mm
Gates textile covered fuel line hose with 8 mm inner diameter

Gates textile covered fuel line hose with 8 mm inner diameter

This is the top-of-the-line Gates flexible fuel line, resistant to modern day, aggressive, fuels.

Textile covered for the correct "vintage" look.

This fuel hose has an 8 mm inner diameter and 13 mm outer diameter.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

This small-diameter hose has a durable and oil resistant textile cover that provides a dependable and safe service on fuel circuits in passenger cars.

This hose is resistant to heat, leaded and unleaded fuels, oil and Diesel.
Please note that E10 fuel resistance is NOT mentioned by the manufacturer!

Recommended for clamped hose applications on low-pressure (carburetor) fuel systems in passenger cars.
NOT suited for high pressure fuel injection systems.

Key Features and Benefits:

• The tube resists heat, fuel (leaded and unleaded petrol, diesel) and oil
• The braided textile cover reinforces the hose and is resistant to heat, ozone and weathering
• Working pressure up to 0.6 MPa (6 kg/cm²)
• Temperature range from -35°C to +100°C

Maximum, single, length: 15 meters.

This hose uses 11 - 13 mm jubilee clips.

Gates textile covered fuel line hose with 8 mm inner diameter

2134.0600
Cohline E10-resistant fuel line hose with 8 mm inner diameter

Cohline E10-resistant fuel line hose with 8 mm inner diameter

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose.

This fuel hose has an actual inner diameter of 7.5 mm and 13.5 mm outer diameter and therewith a nice and tight fit for 8 mm fuel unions.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

This hose uses 11 - 13 mm jubilee clips.

Cohline E10-resistant fuel line hose with 8 mm inner diameter

norm5mm
Endless Band Hose Clamp with Buckle - 5 mm wide

Endless Band Hose Clamp with Buckle - 5 mm wide

Endless Band Hose Clamp with Buckle - 5 mm wide.

Again one of those items that allows you to put the finishing touches on a restoration!

This is the famous "endless band hose clamp with buckle" that was used throughout the 1950's, 1960's and 1970's in the car industry.

Unfortunately, these band clamps are only suitable for one-time use and are discarded after removing them.

Over the years, these clamps have become harder and harder to find but we managed to find a source!

We are selling these in sets.

Such a set consist of the following:

  • Approximately 100 cm Zinc-plated band, 5 millimeters wide
  • 3 buckles

This way, you have roughly a foot (or 33 cm) of band per clamp / buckle which is more than enough for regular applications.

Thanks to the generous length of band, there is virtually no limit to the diameter or circumference of the clamp that you wish to apply although these were usually applied to small diameter fuel lines.

Please note that this style of clamping is NOT suitable for steel-braided lines.

Endless Band Hose Clamp with Buckle - 5 mm wide

jubilee11-13
11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp for 8 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 8 mm internal diameter fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 8 mm internal diameter (i.e. 11 - 13 mm external hose diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

11 - 13 mm Stainless Steel Jubilee Clip Hose Clamp

2134.01.0600
Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

This is the top-of-the-line Cohline, steel-braided E10-resistant, flexible fuel line / hose.

This fuel hose has an 8 mm inner diameter and 16 mm outer diameter and is therewith suitable for 8 mm fuel unions.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 70 mm

 This hose uses 14 - 16 mm jubilee clips.

Cohline E10-resistant fuel line hose with 8 mm inner diameter and steel braiding

Please note:
This article is currently on order from the manufacturer.
We expect the new supply to arrive at our warehouse by the mid October, 2017.
If you don't want to miss out on it, feel free to place your order now.
Payment is not required until we have your shipment ready to go.

OWV
Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec Fuel Line One Way Valve

jet sizer
Carburettor Jet Gauges

Carburettor Jet Gauges

Calibrated gauges to measure jet sizes.

The perfect way to determine the exact size of jets, regardless of what is indicated on them.

Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.

With these gauges, you can still determine which size these jets are.

Indispensable when working on modified carburettors!

Two different sets available:

Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mm
Set 2: 16 gauges, ranging from 1,50 to 3,00 mm

Priced per set!

Carburettor Jet Gauges

JSG01
Jet size gauge 0.5 to 1.5 mm

Jet size gauge 0.5 to 1.5 mm

Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.

Measurements are taken by inserting the tapered needle into the jet.

The size can then directly be read from the scale.

 

 

 

Jet size gauge 0.5 to 1.5 mm

JDK01
54-Piece Jet Drill Set

54-Piece Jet Drill Set

Jet drill set comprising 50 jet drills and and 4 pin vises.

The perfect way to fine-tune any jet to suit your needs.

Also highly suited to clean clogged-up jets.

The set contains:

  • 4 pin vises to suit all drill sizes included
  • 10 drills ranging from 1,0 to 2,0 mm:
    1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.7, 1.8, 1.9 & 2.0 mm
  • 20 drills ranging is size from 0.3 mm to 1.6 mm:
    0.3, 0.35, 0.4, 0.45, 0.50, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 & 1.6 mm
  • 20 x drills Gauge Number 80 to 61 (0.343 to 0.991 mm / 0.0135 to 0.0390 inches )

54-Piece Jet Drill Set

JET REAMER
16-Piece Jet Reamer Set

16-Piece Jet Reamer Set

Jet reamer kit comprising 16 reamers and and a pin vise.

The perfect way to fine-tune any jet to suit your needs.

The set contains:

  • 1 pin vise to suit all reamer sizes in this set
  • 1 storage case
  • 16 reamers ranging is size from 0.33 mm to 2.00 mm:
    0.33; 0.40; 0.45; 0.50; 0.60; 0.70; 0.75; 0.80; 0.90; 1.00; 1.10; 1.20; 1.40; 1.60; 1.80; 2.00 mm

16-Piece Jet Reamer Set

G4074
Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit.

The Tune-up plug for Petrol or LPG, 2 and 4 stroke engines with single, twin or multiple carburettors or fuel injection systems.

The original and best tool for seeing what's happening inside the combustion chamber of the petrol engine.

It allows you to see the combustion and to adjust the mixture by color.

Fits most petrol engines in standard form with additional adapters available for vehicles with alternative sized spark plugs.

Kit includes:

  • See-Through Spark Plug
  • Hexagonal adapter for spark plug wrench
  • Copper sealing washer
  • Extension Cord
  • Extension tube with mirror
  • Cleaning brush
  • Instructions in English

Colortune will fit most vehicles.

Extra adapter sizes available separately

Available in the following basic thread sizes:

  • 10 mm
  • 12 mm
  • 14 mm - SOLD OUT AT THE MOMENT!

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Colortune See Through Spark Plug Kit

Available from our Stock

G4053
Gunson Carbalancer Carburetor Synchronizing Tool

Gunson Carbalancer Carburetor Synchronizing Tool

Gunson Car Balancer.

Internal combustion engines use a mixture of air and petrol to generate their power.

The performance therefore is influenced by the air flowing into it and the petrol that is metered out by the carburettor.

Unless the air flow in Twin or Multiple carburettors is correctly set, the correct mixture adjustment is unlikely to be achieved and this is the simplest tool to achieve that.

Suitable for use on SU, Solex, Auto-Lite (Fomoco), Stromberg, Weber and Zenith and can be adjusted to fit most carburettors including sidedraft, downdraft with air intakes (Venturi) from 25 mm to 67 mm (1”-2”) diameter

  • Easy read scale indicates the air flow and allows adjustment to optimum efficiency
  • Provides smoother and better acceleration
  • Carbalancer can be adjusted to fit most carburettors
  • Easy to follow instructions

The user manual for the Gunson Carbalancer, in English, can be downloaded HERE.

Available from our stock, ready to be shipped.

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Carbalancer Carburetor Synchronizing Tool

MANOMETER2
2 Column Manometer - Synchrometer Carbtune Pro

2 Column Manometer - Synchrometer Carbtune Pro

2 Column Manometer

The New Carbtune Pro - essential for balancing multiple carburettors.

  • Superior resolution to dial type gauges
  • Easily read scale
  • Comes complete with 2 x 5mm and 2 x 6mm ultra high temperature glass filled engineering nylon adapters and rubber hoses.
  • Adapters will suit DHLA & DCOE carburettors and many motorcycle carburettors.
  • Stainless steel columns indicate vacuum
  • No calibration or set-up required
  • High impact plastic casing and scale tubes - no glass
  • Dampers supplied to reduce fluctuations
  • Full instructions

Also suitable for car- and motorcycle engines which have the possibility of hooking up vacuum lines.

Replacement line can be found HERE.
Replacement, brass, vacuum take-off can be found HERE.

2 Column Manometer - Synchrometer Carbtune Pro

MANOMETER4
4 Column Manometer - Synchrometer Carbtune Pro

4 Column Manometer - Synchrometer Carbtune Pro

4 Column Manometer

The New Carbtune Pro - essential for balancing multiple carburettors.

  • Superior resolution to dial type gauges
  • Easy to read scale
  • Comes complete with 4 x 5 mm and 4 x 6 mm ultra high temperature glass filled engineering nylon adapters and rubber hoses.
  • Adapters will suit DHLA & DCOE carburettors and many motorcycle carburettors.
  • Stainless steel columns indicate vacuum
  • No calibration or set-up required
  • High impact plastic casing and scale tubes - no glass
  • Dampers supplied to reduce fluctuations
  • Full instructions

Also suitable for car- and motorcycle engines which have the possibility of hooking up vacuum lines.

Replacement line can be found HERE.
Replacement, brass, vacuum take-off can be found HERE.

4 Column Manometer - Synchrometer Carbtune Pro

9679
Brass vacuum take-off adapter for carburetors and manifolds

Brass vacuum take-off adapter for carburetors and manifolds

Vacuum take-off adapter for Dellorto DHLA and PHF.

Vacuum take off adapter, will fit standard take off point of DHLA carburetors, DHLB carburettors, and PHF carburettors.

Also fits the Weber DCOE series carburettors and Solex ADDHE.

 

Brass vacuum take-off adapter for carburetors and manifolds

SYNCHRONOMETER
Synchrometer airflow meter for carburetors

Synchrometer airflow meter for carburetors

Synchrometer airflow meter for various carburetors.

Pushes into the trumpet / ram pipe / velocity stack or throat to measure the airflow to enable you to balance multiple carburettors.

  • Instructions included
  • The original genuine high quality German made product
  • Can be used for all Weber DCOE and IDF and Dellorto DHLA, DRLA carbs with round intakes or trumpets
  • Can also be used with motorcycle carburetors with round intakes

    Total length of unit 121mm

    Rubber cone dimensions:
    Small end diameter 40mm
    Large end diameter 55mm
    Length of cone 36mm

Synchrometer airflow meter for carburetors