(25) Pump Diaphragm for Solex PHH carburetors CCR2318

Solex
CCR2318
9504918694852
New Arrival !
Add to cart
  • Description
  • More

Replacement pump diaphragm for the Solex 40 PHH and 44 PHH series carburetors.

Please note that the Solex PHH can use various different sizes (and shapes) diaphragms.
This one here is the hexagonal version, with two layers of sheets, a smooth back side and a smooth tip.
As these descriptions can be very confusing, the best references are the photographs that we are showing here.

The dish on this diaphragm measures 30mm in diameter with the can being 9.7 mm tall, measured from that same dish.

Required quantity per carburetor: 1

This is number 25 in the drawing.

Operating principles of the acceleration pump and the role of the diaphragm in this:

This diaphragm is activated by a lever that is connected to the throttle lever(s).

When releasing the throttle, a spring returns the diaphragm to its initial position and by doing so, it sucks-in fuel into the pump chamber, from the float chamber.
A one-way valve prevents this fuel from leaking back into the valve chamber.

When you then activate throttle, that same lever pushes the diaphragm inwards and the pressure that is thus created makes the fuel being squirted downstream with the main airflow through the pump jet.

This extra flow of fuel will prevent "fuel starvation" from occurring when the throttle is suddenly opened which allows large quantities of air being sucked into the engine.

When you then release the throttle again, the diaphragm is again pushed back by the spring, thus priming the pump chamber with a fresh supply of fuel and making it ready to repeat the procedure.

This is an excellent system that has been employed for decades by various makes of carburetors and applied to all kinds of applications.
So, not only Solex but also Weber, Pierburg, Zenith and Mikuni used this system with more or less identical operating principles.

However, to ascertain a flawless operation of this system, the diaphragm need to be in excellent condition.

The original diaphragms are now coming of age and are suffering from the ravages of aggressive modern fuels which causes the "rubberized textile" material to harden or even crack, causing erratic running of the engine and fuel leaks.

Replacing the diaphragm is then the only sensible option which is a rather simple operation.

A complete overview of our pump diaphragms for Solex carburettors can be found HERE.

(25) Pump Diaphragm for Solex PHH carburetors CCR2318

(25) Pump Diaphragm for Solex PHH carburetors CCR2318

Replacement diaphragm for the pump of the Solex 40 PHH and 44 PHH series carburetors.

Please note that the Solex PHH can use various different sizes (and shapes) diaphragms.
This one here is the hexagonal version, with two layers of sheets, a smooth back side and a smooth tip.
As these descriptions can be very confusing, the best references are the photographs that we are showing here.

The dish on this diaphragm measures 30mm in diameter with the can being 9.7 mm tall, measured from that same dish.

Required quantity per carburetor: 1

This is number 25 in the drawing.

(25) Replacement Pump Diaphragm for Solex PHH carburetors CCR2318

(25) Replacement Pump Diaphragm for Solex PHH carburetors CCR2318

(25) Replacement Pump Diaphragm for Solex PHH carburetors CCR2318


(25) Replacement Pump Diaphragm for Solex PHH carburetors CCR2318

(25) Replacement Pump Diaphragm for Solex PHH carburetors CCR2318
Related Products
!