Airfilters Shop
Airfilters Shop

Airfilters

On this page you will find the various after market airfilters that we have on offer.

Airfilters Shop

!
C1050
C1050 Pipercross Universal Airfilter Socks for Ram Pipes

C1050 Pipercross Universal Airfilter Socks for Ram Pipes

These are the famous Pipercross Ram Pipe Socks which are probably the most universal airfilter solution when working with individual air stacks.

These socks are easily tailored to size by shortening them with a pair of scissors.

The generous inner diameter makes them suitable for virtually all rampipes.

Created out of the famous Pipercross foam, the socks don't require any oiling but are used "dry" and are easily washed out in water with a mild detergent.

This is the "normal" version, very well suited for street and track use. Should you be using your vehicle in extremely dusty circumstances, like auto- and motocross, we recommend the Heavy Duty version, C1050MX.

Dimensions:

  • Internal diameter: 70 mm
  • External diameter: 95 mm
  • Internal height: 100 mm
  • External height: 115 mm

Before putting the socks in place, you cut them to size. Then slide them onto the ram pipes and, when desired, you can secure them in place with a simple plastic tie-strap.

Although Pipercross supplies these only in pairs, we understand the need in the market for "singles" and consequently we sell these individually.

Please note that we show a ram pipe in the photos but that this is NOT included.

C1050 Pipercross Universal Airfilter Socks for Ram Pipes

C1050MX
C1050MX Heavy Duty Pipercross Universal Airfilter Socks for Ram Pipes

C1050MX Heavy Duty Pipercross Universal Airfilter Socks for Ram Pipes

These are the famous Heavy Duty Pipercross Ram Pipe Socks which are probably the most universal airfilter solution when working with individual air stacks.

These socks are easily tailored to size by shortening them with a pair of scissors.

The generous inner diameter makes them suitable for virtually all rampipes.

Created out of not less than 3 layers of the famous, green, Heavy Duty Pipercross foam, the socks don't require any oiling but are used "dry" and are easily washed out in water with a mild detergent.

Being the heavy duty version, these socks are very well suited for use in extremely dusty circumstances like auto- and motocross.

For street and track use, the better option is to pick the normal version, C1050.

Dimensions:

  • Internal diameter: 55 mm
  • External diameter: 95 mm
  • Internal height: 95 mm
  • External height: 120 mm

Before putting the socks in place, you cut them to size. Then slide them onto the ram pipes and, when desired, you can secure them in place with a simple plastic tie-strap.

Although Pipercross supplies these only in pairs, we understand the need in the market for "singles" and consequently we sell these individually.

Please note that we show a ram pipe in the photos but that this is NOT included.

C1050MX Heavy Duty Pipercross Universal Airfilter Socks for Ram Pipes

C1052
C1052 Enclosed Pipercross Universal Airfilter Socks for Ram Pipes

C1052 Enclosed Pipercross Universal Airfilter Socks for Ram Pipes

These are the famous "enclosed" Pipercross Ram Pipe Socks which are probably the most universal airfilter solution when working with individual air stacks.

Contrary to the C1050 "open" socks, this version has a rear panel with opening so that it "hugs" the ram pipe.

The generous inner diameter makes them suitable for virtually all rampipes.

The opening in the rear panel measures some 55 mm in diameter but can of course be stretched significantly thanks to the nature of the foam.

Created out of 3 layers of the the famous Pipercross foam, the socks don't require any oiling but are used "dry" and are easily washed out in water with a mild detergent.

Dimensions:

  • Internal diameter: 80 mm
  • External diameter: 110 mm
  • Internal height: 42.5 mm
  • External height: 70 mm

Simply slide the sock onto the ram pipes and, when desired, you can secure them in place with a plastic tie-strap.

Please note that we show a ram pipe in the photos but that this is NOT included.

C1052 Enclosed Pipercross Universal Airfilter Socks for Ram Pipes

PX300DHLA
Pipercross PX300 Airfilter System for Dellorto DHLA Carburetors

Pipercross PX300 Airfilter System for Dellorto DHLA Carburetors

This is the Pipercross PX300 air filter system for 1 Dellorto DHLA carburateur.

Fits the DHLA40, DHLA45 and DHLA48.

An explanation of this ingenious system can be found HERE.

A set consists of a baseplate made to fit the Dellorto DHLA series and, when desired, a PX300 filter element of your choice.

To make life a little easier for you you can open the tables with sizes in a new window by clicking HERE.

To allow you engine to breath as freely as possible, we advise you to take the largest filter that you can fit under the bonnet.

If you are using ram pipes or trumpets, then please allow at least 19 mm of space between the trumpet mouth and inner face of the filter.

The desired shape and size of the filer can be selected through the dropbox at the top of this page.

Should you desire just the filter element, then please click HERE.

Pricing of these sets is as follows:

 Base plate ONLY  US$ 24.95
 Filterelement ONLY  US$ 64.95
 Total  US$ 89.90


When purchasing a baseplate and element together, we can offer these at US$ 84.95 giving you a savings of US$ 4.95 per set.

Pipercross PX300 Airfilter System for Dellorto DHLA Carburetors

PX300PHH
Pipercross PX300 Airfilter System for Mikuni PHH Carburetors

Pipercross PX300 Airfilter System for Mikuni PHH Carburetors

This is the Pipercross PX300 air filter system for 1 Mikuni 40/50 PHH carburateur.

An explanation of this ingenious system can be found HERE.

A set consists of a baseplate made to fit the Mikuni PHH series and, when desired, a PX300 filter element of your choice.

To make life a little easier for you you can open the tables with sizes in a new window by clicking HERE.

To allow you engine to breath as freely as possible, we advise you to take the largest filter that you can fit under the bonnet.

If you are using ram pipes or trumpets, then please allow at least 19 mm of space between the trumpet mouth and inner face of the filter.

The desired shape and size of the filer can be selected through the dropbox at the top of this page.

Should you desire just the filter element, then please click HERE.

Pricing of these sets is as follows:

 Base plate ONLY  US$ 24.95
 Filterelement ONLY  US$ 64.95
 Total  US$ 89.90


When purchasing a baseplate and element together, we can offer these at US$ 84.95 giving you a savings of US$ 4.95 per set.

Pipercross PX300 Airfilter System for Mikuni PHH Carburetors

PX300ADDHE
Pipercross PX300 Airfilter System for Solex ADDHE Carburetors

Pipercross PX300 Airfilter System for Solex ADDHE Carburetors

This is the Pipercross PX300 air filter system for 1 Solex ADDHE carburateur.

An explanation of this ingenious system can be found HERE.

A set consists of a baseplate made to fit the Solex ADDHE series and, when desired, a PX300 filter element of your choice.

To make life a little easier for you you can open the tables with sizes in a new window by clicking HERE.

To allow you engine to breath as freely as possible, we advise you to take the largest filter that you can fit under the bonnet.

If you are using ram pipes or trumpets, then please allow at least 19 mm of space between the trumpet mouth and inner face of the filter.

The desired shape and size of the filer can be selected through the dropbox at the top of this page.

Should you desire just the filter element, then please click HERE.

Pricing of these sets is as follows:

 Base plate ONLY  US$ 24.95
 Filterelement ONLY  US$ 64.95
 Total  US$ 89.90


When purchasing a baseplate and element together, we can offer these at US$ 84.95 giving you a savings of US$ 4.95 per set.

Pipercross PX300 Airfilter System for Solex ADDHE Carburetors

PX300DDH
Pipercross PX300 Airfilter System for Solex DDH Carburetors

Pipercross PX300 Airfilter System for Solex DDH Carburetors

This is the Pipercross PX300 air filter system for 1 Solex DDH carburateur.

An explanation of this ingenious system can be found HERE.

A set consists of a baseplate made to fit the Solex DDH series and, when desired, a PX300 filter element of your choice.

To make life a little easier for you you can open the tables with sizes in a new window by clicking HERE.

To allow you engine to breath as freely as possible, we advise you to take the largest filter that you can fit under the bonnet.

If you are using ram pipes or trumpets, then please allow at least 19 mm of space between the trumpet mouth and inner face of the filter.

The desired shape and size of the filer can be selected through the dropbox at the top of this page.

Should you desire just the filter element, then please click HERE.

Pricing of these sets is as follows:

 Base plate ONLY  US$ 24.95
 Filterelement ONLY  US$ 64.95
 Total  US$ 89.90


When purchasing a baseplate and element together, we can offer these at US$ 84.95 giving you a savings of US$ 4.95 per set.

Pipercross PX300 Airfilter System for Solex DDH Carburetors

PX300175CD
Pipercross PX300 Airfilter System for Stromberg 175 CD Carburetors

Pipercross PX300 Airfilter System for Stromberg 175 CD Carburetors

This is the Pipercross PX300 air filter system for 1 Stromberg 175 CD carburateur.

An explanation of this ingenious system can be found HERE.

A set consists of a baseplate made to fit the Stromberg 175CD series and, when desired, a PX300 filter element of your choice.

To make life a little easier for you you can open the tables with sizes in a new window by clicking HERE.

To allow you engine to breath as freely as possible, we advise you to take the largest filter that you can fit under the bonnet.

If you are using ram pipes or trumpets, then please allow at least 19 mm of space between the trumpet mouth and inner face of the filter.

The desired shape and size of the filer can be selected through the dropbox at the top of this page.

Should you desire just the filter element, then please click HERE.

Pricing of these sets is as follows:

Base plate ONLY US$ 24.95
Filterelement ONLY US$ 64.95
Total US$ 89.90


When purchasing a baseplate and element together, we can offer these at US$ 84.95 giving you a savings of US$ 4.95 per set.

Pipercross PX300 Airfilter System for Stromberg 175 CD Carburetors

PX300DCOE
Pipercross PX300 Airfilter System for Weber DCOE Carburetors

Pipercross PX300 Airfilter System for Weber DCOE Carburetors

This is the Pipercross PX300 air filter system for 1 Weber DCOE carburateur.

Fits the DCOE40, DCOE45 and DCOE48.

An explanation of this ingenious system can be found HERE.

A set consists of a baseplate made to fit the Weber DCOE series and, when desired, a PX300 filter element of your choice.

To make life a little easier for you you can open the tables with sizes in a new window by clicking HERE.

To allow you engine to breath as freely as possible, we advise you to take the largest filter that you can fit under the bonnet.

If you are using ram pipes or trumpets, then please allow at least 19 mm of space between the trumpet mouth and inner face of the filter.

The desired shape and size of the filer can be selected through the dropbox at the top of this page.

Should you desire just the filter element, then please click HERE.

Pricing of these sets is as follows:

 Base plate ONLY  US$ 24.95
 Filterelement ONLY  US$ 64.95
 Total  US$ 89.90


When purchasing a baseplate and element together, we can offer these at US$ 84.95 giving you a savings of US$ 4.95 per set.

Pipercross PX300 Airfilter System for Weber DCOE Carburetors

PX300FILTER
Pipercross PX300 Airfilter Element

Pipercross PX300 Airfilter Element

These are the Pipercross PX300 air filter elements, to be used in combination with the PX300 baseplates.

An explanation of this ingenious system can be found HERE.

The filters are produced from triple-laminated Pipercross filter foam and are supported on the inside by sturdy mesh.

The filters are produced in two basic shapes, the “Dome” and the“Box”.
The differences between the two are best demonstrated in the photos below:

De tegenhanger van de "Bolhoed", de "Doos" vindt u HIER maar de verschillend worden het duidelijkst in onderstaande foto: The filters are produced in two basic shapes, the “Dome” and the“Box”.

The filters always have the same "groundplan" of 190 x 190 mm in order to fit onto the base plates.

The differences are in the shape and in- and external height.

To allow you engine to breath as freely as possible, we advise you to take the highest filter that you can fit under the bonnet.

If you are using rampipes or trumpets, then please allow at least 19 mm of space between the trumpet mouth and inner face of the filter.

The following heights are available for the various models:

Pipercross PX300 Dome Filter
 Dome   External Height   Internal Height 
 C302D 

 65 mm

 40 mm

 C303D 

 90 mm

 65 mm

 C304D 

 125 mm

 100 mm

 

Pipercross PX300 Box Filter
 Box   External Height   Internal Height 
 C3001 

 40 mm

 25 mm

 C3002 

 55 mm

 40 mm

 C3003 

 80 mm

 65 mm

 C3004 

 115 mm

 100 mm


You can choose the required shape and size through the dropbox at the top of this page.

To make life a little easier for you you can open the tables with sizes in a new window by clicking HERE.

Attention!
This is the filter element only.
To be able to use this, you will always require a PX300 base plate, suitable for your carburetor.
The various baseplates that we have available can be found in the PiperCross PX300 department.

Pipercross PX300 Airfilter Element

C9024
C9024 Pipercross Crank Case Breather Filter

C9024 Pipercross Crank Case Breather Filter

The Pipercross Crank Case Breather prevents contaminated oil vapour from re-entering the engine.

This breather filter vents to the atmosphere.

It has& a female fitting rubber neck suitable for 13, 16 and 19 mm neck diameters.

They use a crushed aluminum filtration medium which is resistant to petrochemical corrosion.

It is ideal for fitting directly to rocker covers, vent pipes and breather bottles.

C9024 Pipercross Crank Case Breather Filter

AFDCOE45
Oval Stainless Steel Airfilter 45 mm tall for Weber DCOE - Dellorto DHLA - Solex ADDHE

Oval Stainless Steel Airfilter 45 mm tall for Weber DCOE - Dellorto DHLA - Solex ADDHE

Great, oval, "pancake" airfilter made of high quality stainless steel.

Suitable for:

  • Weber DCOE 38, 40, 42, 45 and 48
  • Dellorto DHLA 40, 45 and 48
  • Solex ADDHE

Sizes of the oval are 178 x 118 mm.

Thickness: 45 mm

The fixing stud adds some 30 mm to the total thickness.

When using slot-in trumpets in Weber DCOE 48 mm versions, you might have to enlarge the holes in the backing plate to make those fit.

Is being supplied including the gasket hat goes between the filter and the carburettor.

Uses "dry" filter elements, so NOT oiled.

Replacement elements can be found HERE.

Oval Stainless Steel Airfilter 45 mm tall for Weber DCOE - Dellorto DHLA - Solex ADDHE

EMPI8736
Replacement Element for 45 MM Airfilter

Replacement Element for 45 MM Airfilter

Replacement element for our 45 mm tall oval, "pancake" airfilter.

To be used "dry" so NOT oiled.

To be used with our filter reference AFDCOE45.

 

 

 

 

Replacement Element for 45 MM Airfilter

10012
Tipo F8 Airfilter for Dellorto UB and MB carburetors

Tipo F8 Airfilter for Dellorto UB and MB carburetors

Vintage original (and rare!) Tipo F8 wire mesh airfilter for, amongst others, the UB and MB series, carburetors.

Will fit carburetors with a M32 x 1.25 thread.
Please check this carefully against your requirements.

Overall diameter: 97 mm
Depth: 45 mm

Required quantity per carburetor: 1

This item is NOT shown in the drawing.

This is a genuine Dellorto part.

Tipo F8 Airfilter for Dellorto UB and MB carburetors

WCAFB386
Bowler Hat Airfilter for Weber DMTL carburetors

Bowler Hat Airfilter for Weber DMTL carburetors

Great looking "Bowler Hat" style airfilter with chromed mesh and baseplate to fit the Weber DMTL carburetors.

Foam insert.

Made by Webcon.

The total package contains the following:

  • Breather pipe adapter
  • Blanking Plug
  • Base plate gasket
  • Fixing material as per the photograph

The total height is circa 60 mm.

Please note that the base plate will need slight alteration to make it fit onto a Land Rover with 32/34 Weber DMTL.

Bowler Hat Airfilter for Weber DMTL carburetors

WCAFB386
Bowler Hat Airfilter for Weber DMTR carburetors

Bowler Hat Airfilter for Weber DMTR carburetors

Great looking "Bowler Hat" style airfilter with chromed mesh and baseplate to fit the Weber DMTR carburetors.

Foam insert.

Made by Webcon.

The total package contains the following:

  • Breather pipe adapter
  • Blanking Plug
  • Base plate gasket
  • Fixing material as per the photograph

The total height is circa 60 mm.

Please note that the base plate will need slight alteration to make it fit onto a Land Rover with 32/34 Weber DMTL.

Bowler Hat Airfilter for Weber DMTR carburetors

WCAFB386
Bowler Hat Airfilter for Weber DFTH carburetors

Bowler Hat Airfilter for Weber DFTH carburetors

Great looking "Bowler Hat" style airfilter with chromed mesh and baseplate to fit the Weber DFTH carburetors.

Foam insert.

Made by Webcon.

The total package contains the following:

  • Breather pipe adapter
  • Blanking Plug
  • Base plate gasket
  • Fixing material as per the photograph

The total height is circa 60 mm.

Please note that the base plate will need slight alteration to make it fit onto a Land Rover with 32/34 Weber DMTL.

Bowler Hat Airfilter for Weber DFTH carburetors