Sytec Fuel Technology
Sytec Fuel Technology

Sytec Fuel Technology

On this page you will find Sytec Fuel Technology filters and fuel line connectors.

Sytec Fuel Technology

!
PRO804
Sytec Pro-Line in-line fuel filter - 6 mm

Sytec Pro-Line in-line fuel filter - 6 mm

In line fuel filter with cleanable / replaceable filter.

Suitable for 6 mm internal diameter fuel hoses.

Replacement filter elements are available HERE.

Chrome finish.

Toughened glass phial.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

Supplied with 2 Jubilee clips.

Couplings Specifications:
Fuel Unions for fuel lines with 6 mm internal diameter

Sytec Pro-Line in-line fuel filter - 6 mm

PRO805
Sytec Pro-Line in-line fuel filter - 8 mm

Sytec Pro-Line in-line fuel filter - 8 mm

In line fuel filter with cleanable / replaceable filter.

Suitable for 8 mm internal diameter fuel hoses.

Replacement filter elements are available HERE.

Chrome finish.

Toughened glass phial.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

Supplied with 2 Jubilee clips.

Couplings Specifications:
Fuel Unions for fuel lines with 8 mm internal diameter

Sytec Pro-Line in-line fuel filter - 8 mm

PRO896
Replacement elements for Sytec in-line fuel filter

Replacement elements for Sytec in-line fuel filter

3 replacement elements for the Sytec Pro-Line in-line fuel filter.

Come complete with new rubber seals.

These elements fit our PRO804 and PRO805 Sytec in-line fuel filters.

Suitable for system pressures of up to 10 PSI / 0.7 Bar.

 

 

 

 

Replacement elements for Sytec in-line fuel filter

FUELINJECTIONFILTE
Sytec Fuel Filter for Injection Systems - 8 mm

Sytec Fuel Filter for Injection Systems - 8 mm

Newly arrived Sytec Fuel Filter for Injection Systems - 8 mm

Special Sytec fuel filter for injected fuel systems.

Fuel Unions for fuel lines on both end with 8 mm internal diameter.

We strongly advise you to secure your fuel lines using our Stainless Steel Jubilee Clips.

This filter measures some 76 mm in length and 55 mm in diameter.

Sytec Fuel Filter for Injection Systems - 8 mm

FPG001
Sytec Fuel Pressure Gauge 0 - 15 PSI / 0 - 1 Bar

Sytec Fuel Pressure Gauge 0 - 15 PSI / 0 - 1 Bar

Sytec Fuel Pressure Gauge 0 - 15 PSI / 0 - 1 Bar.

Low pressure fuel pressure gauge.

Ideal for setting the pressure on systems with carburettors.

Can be used with the 85mm Filter King filter and pressure regulator or our Fuel Pressure Gauge Adapter.

Range:

  • 0 - 15 PSI
  • 0 - 1 Bar

Thread: 1/8th" tapered NPTF.

Note:
This gauge should only be used for setting-up and then be removed for normal running.
NOT suited for high-pressure (fuel injected) systems!

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 542 Thread Sealant which will offer the added properties of protecting your connections from undoing themselves.

Sytec Fuel Pressure Gauge 0 - 15 PSI / 0 - 1 Bar

FUELGAUGEKIT
Sytec In-Line Fuel Pressure Gauge Kit - 0 - 15 PSI / 0 - 1 Bar

Sytec In-Line Fuel Pressure Gauge Kit - 0 - 15 PSI / 0 - 1 Bar

Sytec In-Line Fuel Pressure Gauge Kit.

A fantastically finished set to build your own in-line fuel pressure monitoring system.

Specifically for, low-pressure carburetor systems.
NOT suited for high-pressure fuel-injection systems!

The set consists of:

  • Sytec fuel pressure gauge (0 - 15 PSI / 0 - 1 Bar)
  • Pressure gauge adapter with connections for 8 mm fuel line
  • Brass blanking plug
  • Roll of our Superior Quality PTFE tape
  • 2 Stainless Steel jubilee clips for 8 mm fuel line

Suitable for flexible fuel lines with an internal diameter of 8 mm.

The adapter is machined from a solid billet of aluminum.

This set is intended to be used on low-pressure fuel systems for carburetors.
A high-pressure set for fuel injection systems can be found HERE.

Spare, brass, blanking plugs can be found HERE.

Sytec In-Line Fuel Pressure Gauge Kit - 0 - 15 PSI / 0 - 1 Bar

OWV
Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec Fuel Line One Way Valve

T6
Sytec 6 mm Brass Fuel T-Piece

Sytec 6 mm Brass Fuel T-Piece

Sytec Brass Fuel T-Piece for fuel lines with an internal diameter of 6 millimeter.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec 6 mm Brass Fuel T-Piece

FUELPIPEPLUG8MM
Blue Anodized Sytec Fuel Line Plug for 8 mm

Blue Anodized Sytec Fuel Line Plug for 8 mm

Blue Anodized Sytec Fuel Line Plug for 8 mm.

Ideal for blanking unused fuel lines.

We do advise you to use our premium quality jubilee clips to secure your fuel line onto this plug.
For your convenience, you can order these right along with the joiner by simply selecting them through the dropbox.

Alternatively, you can go HERE for our accessories for 8 mm fuel line.

Blue Anodized Sytec Fuel Line Plug for 8 mm

T8
Sytec 8 mm Brass Fuel T-Piece

Sytec 8 mm Brass Fuel T-Piece

Sytec Brass Fuel T-Piece for fuel lines with an internal diameter of 8 millimeter.

Despite the barbed edge on these unions, we strongly advise you to secure your fuel lines using our stainless steel jubilee clips.

For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec 8 mm Brass Fuel T-Piece

FPA9011
Sytec 8 mm Pipe Union 90 Degrees with 1/8 NPTF thread

Sytec 8 mm Pipe Union 90 Degrees with 1/8 NPTF thread

Sytec 8 mm Pipe Union 90 Degrees with 1/8th tapered thread.

Union with 1/8" NPTF tapered thread for fuel lines with an internal diameter of 8 mm.

Specification:
Inlet: 1/8" tapered NPTF
Outlet: 8 millimeter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 542 Thread Sealant which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec 8 mm Pipe Union 90 Degrees with 1/8 NPTF thread

FPA9021/A
Sytec 8 mm Pipe Union 90 Degrees with 1/4 NPTF thread

Sytec 8 mm Pipe Union 90 Degrees with 1/4 NPTF thread

Sytec 8 mm Pipe Union 90 Degrees with 1/4th thread for, amongst others, Facet Red Top Fuel Pumps.

Union with 1/4" NPTF tapered thread for fuel lines with an internal diameter of 8 mm.

Sold as a Pair.

Specification:
Inlet: 1/4" tapered NPTF
Outlet: 8 millimeter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec 8 mm Pipe Union 90 Degrees with 1/4 NPTF thread

FPA9022/B
Sytec 10 mm Pipe Union 90 Degrees with 1/4 NPTF thread

Sytec 10 mm Pipe Union 90 Degrees with 1/4 NPTF thread

Sytec 10 mm Pipe Union 90 Degrees with 1/4 thread for, amongst others, Facet Red Top Fuel Pump.

Union with 1/4" NPTF tapered thread for fuel lines with an internal diameter of 10 mm.

Sold as a Pair

Specification:
Inlet: 1/4" tapered NPTF
Outlet: 10 millimeter

Please use our superior quality PTFE tape each time that you (re-)assemble screwed connections in the fuel tract in order to properly seal the connection.
As an alternative, you can use our Loctite 243 Thread Locker which will offer the added properties of protecting your connections from undoing themselves.

Sytec 10 mm Pipe Union 90 Degrees with 1/4 NPTF thread

SYTECPL031
Sytec Replacement Fuel Pump for Weber PL031 - Aston Martin Virage

Sytec Replacement Fuel Pump for Weber PL031 - Aston Martin Virage

Sytec replacement pump for the long obsolete Weber PL-031 fuel pump as used on, amongst others, the 1990 - 1996 Aston Martin Virage and Virage Volante.

The Weber PL031 is no longer produced yet it is a vital part of the car's fuel system.

Systec stepped in and produces this replacement pump in the USA.

Please note: this pump requires a high quality pre-filter to avoid contamination.

Specifications:

  • Fittings In:- Jic 6
  • Fittings Out:- Jic 6
  • Voltage:-12v
  • Flow Ltr/Hr (Max):- 348
  • Flow Ltr/Hr @ 3 Bar (44psi):- 270
  • Flow Ltr/Hr @ 5 Bar (73psi):- 222
  • Location To Tank (Mtrs) 0.6
  • Thread Size:-10x1mm SFT
  • Length (mm):- 160
  • Diameter (mm):- 43
  • Weight (Kg):- 0.46

Limited availability!

Sytec Replacement Fuel Pump for Weber PL031 - Aston Martin Virage

SYTECPL031
Sytec Replacement Fuel Pump for Weber PL031 - Ferrari F40

Sytec Replacement Fuel Pump for Weber PL031 - Ferrari F40

Here we have a Sytec replacement for the long obsolete Weber PL-031 fuel pump as used on, amongst others, the Ferrari F40.

The Weber PL031 is no longer produced yet it is a vital part of the car's fuel system.

Sytec stepped in and produces this replacement pump in the USA.

Please note: this pump requires a high quality pre-filter to avoid contamination.

Specifications:

  • Fittings In:- Jic 6
  • Fittings Out:- Jic 6
  • Voltage:-12v
  • Flow Ltr/Hr (Max):- 348
  • Flow Ltr/Hr @ 3 Bar (44psi):- 270
  • Flow Ltr/Hr @ 5 Bar (73psi):- 222
  • Location To Tank (Mtrs) 0.6
  • Thread Size:-10x1mm SFT
  • Length (mm):- 160
  • Diameter (mm):- 43
  • Weight (Kg):- 0.46

Limited availability!

Sytec Replacement Fuel Pump for Weber PL031 - Ferrari F40

LOCTITE542-10ML
10 ml Loctite 542 Thread Sealant

10 ml Loctite 542 Thread Sealant

LOCTITE 542

Thread Sealant - medium strength.
For fine threads in hydraulic, pneumatic and general fittings.
Fast curing.

LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies.
The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration.
The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.

Your Benefits:

  • Ideal for fine threads as used in hydraulic, pneumatic & general fittings
  • Suitable for metal threads only
  • Instant low-pressure seal
  • Resistant to fuel, oil, coolants and hydraulic fluids
  • Locks connection against vibration loosening
  • DVGW approval (EN 751-1): NG-5146AR0855

Excellently suited for sealing connections on carburetors and fuel pumps!

10 ml Loctite 542 Thread Sealant

LOCTITE243-5ML
5 ml Loctite 243 Thread Locker

5 ml Loctite 243 Thread Locker

LOCTITE 243

Threadlocking Adhesive - medium strength.

General purpose.

Suitable for all metal threaded assemblies.

LOCTITE 243 is a general purpose threadlocker of medium bond strength.
This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration.
The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces.
It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

Your Benefits 

  • Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
  • Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)
  • Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
  • Permits disassembly with hand tools for servicing P1 NSF Reg. No.: 123000

5 ml Loctite 243 Thread Locker