Weber DCOE and DCO/SP Carburetor Parts
Weber DCOE and DCO/SP Carburetor Parts

Weber DCOE and DCO/SP Parts

Weber DCOE and DCO/SP Carburetor Parts.

On this page you will find all currently available parts for the Weber DCOE 40, 45 and 48 carburetors.

Please note that some parts are NOT interchangeable between the Italian made DCOE's and the current production Spanish DCOE's. However, this will be clearly indicated in the article description.

Please contact us by email if the part that you are looking for is not listed.
Our Contact Page can be found HERE.

Also included on this page are parts for the Weber DCO/SP series carburettors.

Please click HERE for the Weber DCOE Pump Rod Specifications.

Please click HERE for the Weber DCOE Idle Jet Specifications.

Click HERE for an exploded view drawing of the Weber DCOE.
The numbers in the drawing correspond to the numbers in brackets at the beginning of the article description on the page below.

Weber DCOE and DCO/SP Carburetor Parts

!
50DCO/SP-NOS
New-Old-Stock set of 2 x Weber 50 DCO/SP Carburetors for Opel 2400 Rallye

New-Old-Stock set of 2 x Weber 50 DCO/SP Carburetors for Opel 2400 Rallye

New-Old-Stock set consisting of 2 x Weber 50 DCO/SP carburettors for Opel 2400 Rallye.

This is what we consider, already, our find of he year!

This is an authentic, unused, set of 2 Weber 50 DCO/SP carburettors, especially made for use on the Opel 2400 Rally engines but will fit of course all engines and manifolds that can accommodate 50 mm carburetors.

Produced around 1980 in Bologna, Italy, this is THE Must-Have for the Opel- freak!

Please note that Weber still has 50DCP/Sp's produced in Spain nowadays but that this concerns and authentic, matched (!) Italian set.

Apart from a slight quality advantage compared to the Spanish production items, the most important is that these carbs are period-correct for creating or restoring one of Opel's Rally Beasts.

In Factory Rally Trim, these 2400 engines boasted, reputedly, over 350 HP with Maestro's like Walter Röhrl at the wheel.

This particular version, 50DCO1/SP 8D, has 4 progression holes.

As this is the DCO/SP version (Doppio Corpo Orizontale / SPort or Twin Barrel Horizontal Sports) these carburettors do NOT have any form of Cold-Start Device (or choke) fitted.

The set will be supplied as depicted, each carburetor in its original box.

Accessories and virtually all jets and tuning parts for these DCO/SP's can be found HERE.

They are supplied with the following jetting recipe:

  • 46 mm choke / venturi (no other sizes available)
  • 180 Main Jet
  • 65F8 Idle Jet
  • F7 Main Emulsion Tube
  • 45 Pump Jet
  • 100 Back Bleed Valve
  • 250 Needle Valve

The trumpets measure 42.5 mm in length.

These carburetors might require a DCO/SP mounting kit which can be found HERE.

Only 1 set available!

New-Old-Stock set of 2 x Weber 50 DCO/SP Carburetors for Opel 2400 Rallye

FK0002
Mounting Kit for Weber DCO/SP carburetors

Mounting Kit for Weber DCO/SP carburetors

Newly arrived Mounting Kit for Weber DCO/SP carburetors

This is a stud kit to mount a Weber DCO/SP 48, 50 or 55 carburetor.

These shouldered studs give more clearance to enable thackery washers & nyloc nuts to be used.

The thread to to the manifold is 5/16 UNC thread.

The total length is some 40mm.

This set is supplied as a set of 4 studs, thackery washers & nyloc nuts, enough to mount 1 DCO/SP.

Mounting Kit for Weber DCO/SP carburetors

40DCOE23
Restored Vintage Weber 40 DCOE 23 carburetor

Restored Vintage Weber 40 DCOE 23 carburetor

Restored Vintage Weber 40 DCOE 23 carburetor.

This is an original, vintage, Weber 40DCOE23, Made in Bologna, Italy.

Originally delivered on a Lamborghini Jarama, they can be dated to the first half of the 1970's.

It concerns 3 carburetors with the extremely low serial numbers 102, 212 en 235.
Please also see the photographs.

Attention: although we have 3 pcs available, the price is for 1 !

These carburettors have been professionally overhauled and restored to their former glory as the photos will show.

It concerns version 23 met 3 progression holes.

Of course they are equipped with their original cable-operated choke / starter mechanisms.

They will be supplied as show in the pictures so with a cable operated throttle handle and single fuel union.

Depending on your set-up, they might require a double fuel union and / or different handles.
These accessories, and virtually all jets, emulsion tubes and chokes can be found in the Weber DCOE department of our store.

The current specification and jetting recipe is as follows:

  • 30 mm Choke
  • 210 Air corrector
  • 115 Main jet
  • 45F9 Idle jet
  • F3 Main emulsion tube
  • 35 Pump jet
  • 70 Back bleed valve
  • 175 Needle valve

The trumpets are new and measure some 40 mm in length.

Restored Vintage Weber 40 DCOE 23 carburetor

19550.174
New Weber 40 DCOE 151 Carburetor

New Weber 40 DCOE 151 Carburetor

Newly arrived Service Kit for Pierburg 36 1B2 carburetors for BMW 315

This is a brand new Weber 40DCOE Carburetor.

It is an authentic Weber, made in Spain.

Equipped with a hand (cable) activated choke (or cold-start device if you prefer that name).

This is version 151 with 3 progression holes.

It is supplied as shown in the picture with a single fuel union and cable-operated lever.

Depending on your set-up, it might be required to purchase a rod-operated lever, balance lever and / or a double fuel union. Please visit the Weber DCOE page for these accessories.

Standard Jetting:

  • Venturi / Choke : 30 mm
  • Main jet: 115
  • Emulsion tube: F11
  • Air corrector jet: 200
  • Pump exhaust valve: 50
  • Idle jet: 45F9
  • Pump jet: 40
  • Needle valve: 1.75
  • Starter Jet: 85F9
  • Starter Air Jet: 150

There is a more than good range of jets available for these carburetor so you can tune it to your requirements.

Click HERE for those Weber DCOE jets.

This Weber carburetor is in stock and ready to ship!

New Weber 40 DCOE 151 Carburetor

19600.060
New Weber 45 DCOE 152 Carburetor

New Weber 45 DCOE 152 Carburetor

This is a brand new Weber 45DCOE Carburetor.

It is an authentic Weber, made in Spain.

Equipped with a hand (cable) activated choke (or cold-start device if you prefer that name).

This is version 152 with 3 progression holes.

It is supplied as shown in the picture with a single fuel union and cable-operated lever.

Depending on your set-up, it might be required to purchase a rod-operated lever, balance lever and / or a double fuel union. Please visit the Weber DCOE page for these accessories.

Standard Jetting:

  • Venturi / Choke : 36 mm
  • Auxiliary Venturi: 4.5
  • Main jet: 145
  • Emulsion tube: F16
  • Air corrector jet: 155
  • Pump exhaust valve: 40
  • Idle jet: 55F8
  • Pump jet: 45
  • Needle valve: 2.00

There is a more than good range of jets available for these carburetor so you can tune it to your requirements.

Click HERE for those Weber DCOE jets.

This Weber carburetor is in stock and ready to ship!

New Weber 45 DCOE 152 Carburetor

WCPME201
Mercedes Benz 190SL 2 x Weber DCOE40 Conversion Kit

Mercedes Benz 190SL 2 x Weber DCOE40 Conversion Kit

If you own a Mercedes 190SL, you are probably very well aware of the fact that the original Solex PHH carburetors are reaching the end of their working life.

Wear and tear to the shafts, housings, butterfly discs etc cause irradical running, rough idle, performance and power loss and loss of driveability.

Second hand prices are running in the thousands by now and those carburettors are just as old and worn as the ones you already have...

"Off the shelf solutions" were not available so far but that has changed now!

As per today, we can offer you a 2 x Weber 40DCOE conversion kit that is tailor-made for the 190 SL!

Superbly crafted in the UK, this kit includes brand new, genuine, Weber 40DCOE carburettors expertly calibrated and jetted to suit the Mercedes so little or no additional calibration will be required (depending on the condition of your engine of course).

The kit also includes superb, CNC machined, anodized air box adapters, replacement rubber mounting blocks, plus the linkage rods, gaskets, studs etc.

We dare to say that this is the finest MB 190SL DCOE kit available on the market today.

Please note:
Barely introduced, there is already a waiting list for these kits and consequently there is a lead time of around 1 week on these kits. Please take this into account when ordering.

Mercedes Benz 190SL 2 x Weber DCOE40 Conversion Kit

99903.987
Stainless Steel Heat Shield for Weber DCOE Carburetors

Stainless Steel Heat Shield for Weber DCOE Carburetors

Stainless Steel Heat Shield for Weber DCOE Carburetors.

Protects the carburettor from radiant heat.

This heat shield is secured using the screws for the Pump Cover.

Required quantity per carburetor: 1

Please note that the the carburetor in the photos is only shown for illustration purposes.
It is NOT included in the price.

Stainless Steel Heat Shield for Weber DCOE Carburetors

DHLA A/C GASKET
Air Cleaner Gasket for Weber DCOE 40 carburetors

Air Cleaner Gasket for Weber DCOE 40 carburetors

Air filter gasket for the Weber DCOE40 carburetors.

This gasket is placed in between the carburettor and the aircleaner housing.

Required quantity per carburetor: 1

Also fits the Dellorto DHLA 40.

 

Air Cleaner Gasket for Weber DCOE 40 carburetors

DHLA A/C GASKET45-48
Air Cleaner gasket for Weber DCOE 45 and 48 carburetors

Air Cleaner gasket for Weber DCOE 45 and 48 carburetors

Air filter gasket for the Weber DCOE45 and DCOE48 carburetors.

This gasket is placed in between the carburettor and the aircleaner housing.

Required quantity per carburetor: 1

Also fits the Dellorto DHLA45 and DHLA48.

 

Air Cleaner gasket for Weber DCOE 45 and 48 carburetors

8084
Weber DCOE 40 Manifold Gasket

Weber DCOE 40 Manifold Gasket

Gasket for between the carburetor and the manifold as used by, amongst others, Alfa Romeo on the Weber DCOE40 carburetors.

Required quantity per carburetor: 2

This gasket is NOT listed in the drawing.

 

Weber DCOE 40 Manifold Gasket

8302
Weber DCOE 45 Manifold Gasket

Weber DCOE 45 Manifold Gasket

Manifold gasket for the Weber DCOE45 carburetors.

This gasket is placed in between the carburetor and the inlet manifold.

Required quantity per carburetor: 2

This gasket is NOT listed in the drawing.

 

Weber DCOE 45 Manifold Gasket

41205
Old Style Starter Jet F5 for Weber DCOE

Old Style Starter Jet F5 for Weber DCOE

This is the old style, 1-piece, F5 starter jet for the Weber DCOE carburetors.

This jet has now been replaced by a separate emulsion tube and air corrector (numbers 62 and 74 in the drawing) which are NOT interchangeable with this particular version!

Due to low demand, we keep a very limited stock of these jets but it is readily available from our warehouse in sizes:

  • 60F5
  • 65F5
  • 80F5
  • 90F5

Most other sizes are available on request but do have a lead time of around 1 week.

Required quantity per carburettor: 1

This jet is NOT listed in the drawing.

Old Style Starter Jet F5 for Weber DCOE

61002.010
(1) Fuel Filter Cover for Weber DCOE carburetors

(1) Fuel Filter Cover for Weber DCOE carburetors

Bronze Fuel Filter Cover for the Weber DCOE carburetor.

Required quantity per carburetor: 1

This is item number 1 in the drawing.

 

 

(1) Fuel Filter Cover for Weber DCOE carburetors

41530.024
(2) Fiber Seal for Fuel Banjo for Weber DCOE carburettors

(2) Fiber Seal for Fuel Banjo for Weber DCOE carburetors

Fiber Seal for the Fuel Filter Cover for the Weber DCOE carburetor.

Also fits the DCO / SP.

Required quantity per carburetor: 1

This is item number 2 in the drawing.

 

(2) Fiber Seal for Fuel Banjo for Weber DCOE carburetors

37022.002
(3) Fuel Inlet Filter for Weber DCOE carburetors

(3) Fuel Inlet Filter for Weber DCOE carburetors

Brass mesh fuel Inlet Filter for the Weber DCOE series carburetor.

Also fits the DCO / SP.

Required quantity per carburettor: 1

This is item number 3 in the drawing.

 

 

 

(3) Fuel Inlet Filter for Weber DCOE carburetors

32376.003
(4) Jet Cover for Weber DCOE carburetors

(4) Jet Cover for Weber DCOE carburetors

Jet cover assembly for the Weber DCOE carburetor.

Assembly includes wing nut and small fiber seal, but not the large seal.

Required quantity per carburetor: 1

This is item number 4 in the drawing.

 

(4) Jet Cover for Weber DCOE carburetors

64695.021
(5) Screw for Weber DCOE carburetors

(5) Screw for Weber DCOE carburetors

Screw to secure the top and the bottom cover on the Weber DCOE carburetor.

Required quantity per carburetor: 9

This is item number 5 in the drawing.

 

 

 

 

(5) Screw for Weber DCOE carburetors

41550.002
(6) Jet Cover Washer for Weber DCOE carburetors

(6) Jet Cover Washer for Weber DCOE carburetors

Washer for the jet cover assembly for the Weber DCOE carburetor.

Required quantity per carburetor: 1

This is item number 6 in the drawing.

 

 

(6) Jet Cover Washer for Weber DCOE carburetors

41715.001
(7) Top Cover Gasket for Italian Weber DCOE carburetors

(7) Top Cover Gasket for Italian Weber DCOE carburetors

Top cover gasket for the Italian-made Weber DCOE carburetor.

Fits the DCOE40 up to version 150, DCOE45 up to version 150 and all DCOE48's.

Required quantity per carburetor: 1

This is item number 7 in the drawing.

 

(7) Top Cover Gasket for Italian Weber DCOE carburetors

41715.001R
(7) Rubber Top Cover Gasket for Italian Weber DCOE carburetors

(7) Rubber Top Cover Gasket for Italian Weber DCOE carburetors

Extra strong rubber top cover gasket for the Italian-made Weber DCOE carburetor.

Fits the DCOE40 up to version 150, DCOE45 up to version 150 and all DCOE48's.

Required quantity per carburetor: 1

This is item number 7 in the drawing.

(7) Rubber Top Cover Gasket for Italian Weber DCOE carburetors

41715.011
(7) Top Cover Gasket for Spanish Weber DCOE carburetors

(7) Top Cover Gasket for Spanish Weber DCOE carburetors

Top cover gasket for the Spanish-made Weber DCOE carburetor.

Fits the DCOE40 higher than version 150 and DCOE45 higher than version 150.

Required quantity per carburetor: 1

This is item number 7 in the drawing.

 

(7) Top Cover Gasket for Spanish Weber DCOE carburetors

79503
(8) Needle Valve Assembly for Weber DCOE carburetors

(8) Needle Valve Assembly for Weber DCOE carburetors

Needle valve assembly for the Weber DCOE carburetor.

Consists of:

  • Spring-loaded, metal-tipped needle valve
  • Needle valve seat

Available from our stock in the following sizes:

  • 150
  • 175
  • 200
  • 225
  • 250
  • 300

Required quantity per carburetor: 1

This is item number 8 in the drawing.

(8) Needle Valve Assembly for Weber DCOE carburetors

41030.005
(9) Brass Float for Italian Weber DCOE carburetors

(9) Brass Float for Italian Weber DCOE carburetors

Brass float for the Weber DCOE series carburettor as originally produced in Bologna, Italy.

The current production Spanish DCOE's please use a plastic float and these two should NOT be interchanged!

Required quantity per carburettor: 1

This is item number 9 in the drawing.

(9) Brass Float for Italian Weber DCOE carburetors

41030.034
(9) Plastic Float for Spanish Weber DCOE DCO SP carburetors

(9) Plastic Float for Spanish Weber DCOE DCO SP carburetors

Plastic float for the Weber DCOE and DCO/SP carburetor as currently being produced in Spain.

For the original production Italian DCOE's please use a brass float and these two should NOT be interchanged!

Required quantity per carburetor: 1

This is item number 9 in the drawing.

 

(9) Plastic Float for Spanish Weber DCOE DCO SP carburetors

52580.001
(10) Emulsion Tube Holder for Weber DCOE carburetors

(10) Emulsion Tube Holder for Weber DCOE carburetors

Emulsion Tube Holder for the Weber DCOE carburetor.

Required quantity per carburetor: 2

This is item number 10 in the drawing.

 

 

(10) Emulsion Tube Holder for Weber DCOE carburetors

77401
(11) Air Corrector Jet for Weber DCOE carburetors

(11) Air Corrector Jet for Weber DCOE carburetors

Air corrector jet for the Weber DCOE carburetors.

Available from our stock in size:

  • 100
  • 105
  • 110
  • 115
  • 120
  • 125
  • 130
  • 135
  • 145
  • 150
  • 160
  • 165
  • 170
  • 175
  • 180
  • 185
  • 190
  • 200
  • 205
  • 210
  • 215
  • 220
  • 225
  • 230
  • 235
  • 240
  • 245
  • 250
  • 260

Required quantity per carburettor: 2

This is item number 11 in the drawing.

(11) Air Corrector Jet for Weber DCOE carburetors

52585.006
(12) Idle Jet Holder for Weber DCOE carburetors

(12) Idle Jet Holder for Weber DCOE carburetors

Idle Jet Holder for Weber DCOE carburetors.

Holds the idle jet in place and allows for easy changing of jets when fine tuning the carburetors.

Required quantity per carburettor: 2

This is item number 12 in the drawing.

 

 

(12) Idle Jet Holder for Weber DCOE carburetors

61450
(13) F-type Emulsion Tube for Weber DCOE carburetors

(13) F-type Emulsion Tube for Weber DCOE carburetors

F-type emulsion for Weber DCOE carburetors.

Available in versions:

  • F1 - available from stock
  • F2 - available from stock
  • F3 - available from stock
  • F4 - available from stock
  • F5 - available from stock
  • F7 - available from stock
  • F8 - available from stock
  • F9 - available from stock
  • F11 - available from stock
  • F12
  • F14
  • F15 - available from stock
  • F16 - available from stock
  • F41 - available from stock
  • F47 - available from stock
  • F50

Please note that we have varying quantities in stock and that supply to us is dramatic at times.
If a version is not listed as being in stock, then please take a delivery time of some 10 extra days into account.

Required quantity per carburettor: 2

This is item number 13 in the drawing.

(13) F-type Emulsion Tube for Weber DCOE carburetors

73401
(15) Main Jet for Weber DCOE carburetors

(15) Main Jet for Weber DCOE carburetors

Main jet for the Weber DCOE carburetors.

Available from our stock in size:

  • 100
  • 105
  • 107
  • 110
  • 112
  • 115
  • 117
  • 120
  • 122
  • 125
  • 130
  • 135
  • 138
  • 140
  • 142
  • 145
  • 150
  • 152
  • 155
  • 160
  • 165
  • 170
  • 175
  • 180
  • 185
  • 190
  • 195
  • 200
  • 205
  • 210
  • 215
  • 220
  • 225
  • 230
  • 235
  • 240
  • 245
  • 250

Required quantity per carburetor: 2

This is item number 15 in the drawing.

(15) Main Jet for Weber DCOE carburetors

DCOEIDLEJET
(16) Idle Jet for Weber DCOE carburetors

(16) Idle Jet for Weber DCOE carburetors

Idle jet for the Weber DCOE carburetors.

Available from our stock in size:

  • 40 F8
  • 45 F9
  • 46 F9
  • 47 F9
  • 48 F9
  • 49 F9
  • 50 F2
  • 50 F6
  • 50 F8
  • 50 F9
  • 50 F11
  • 50 F14
  • 55 F8
  • 59 F21
  • 65 F8
  • 65 F11

Other sizes are available on request.

Weber maintains a rather complicated system of marking these idle jets. Part of this is due to the fact that the jets, more or less, have the emulsion tube built-it (or at least air holes).

A complete overview of the Weber DCOE idle jets can be found HERE.

Required quantity per carburettor: 2

This is item number 16 in the drawing.

(16) Idle Jet for Weber DCOE carburetors

69912.45
(17) Auxiliary Venturi for late Weber 40 DCOE carburetors

(17) Auxiliary Venturi for late Weber 40 DCOE carburetors

Auxiliary Venturi for late Weber 40 DCOE carburetors.

This is the auxiliary venturi for the late, Spanish, Weber 40DCOE (later than type 40DCOE 150).
This type of venturi is secured with a grub screw and NOT a steel clip.

It is suitable for bolt-on trumpets but not for the slide-in type trumpets.

Please note that the late type and early type venturis are NOT interchangeable!

Required quantity per carburettor: 2

This is item number 17 in the drawing.

(17) Auxiliary Venturi for late Weber 40 DCOE carburetors

70003.450
(17) Auxiliary Venturi for early Weber 40 DCOE carburetors

(17) Auxiliary Venturi for early Weber 40 DCOE carburetors

Auxiliary Venturi for early Weber 40 DCOE carburetors.

This is the auxiliary venturi for the early, Italian, Weber 40DCOE.
This type of venturi is secured with a steel clip and NOT a grub screw.

It is suitable for both slide-in and bolt-on trumpets.

Please note that the early type and later type (grub screw) venturis are NOT interchangeable!

Required quantity per carburettor: 2

This is item number 17 in the drawing.

(17) Auxiliary Venturi for early Weber 40 DCOE carburetors

DCOEAVCLIP
Auxiliary Venturi Spring Clip for early Weber DCOE carburetors

Auxiliary Venturi Spring Clip for early Weber DCOE carburetors

Auxiliary Venturi Spring Clip for early Weber DCOE carburetors.

This is the clip that secures the early type auxiliary venturi in the body of the Weber DCOE.

Please note that the early type and later type (grub screw) venturis are NOT interchangeable!

Required quantity per carburettor: 4

This clip is NOT in the drawing.

Auxiliary Venturi Spring Clip for early Weber DCOE carburetors

W40/26
(18) 26 mm long Slot-In Trumpet for Weber DCOE40 carburetors

(18) 26 mm long Slot-In Trumpet for Weber DCOE40 carburetors

Top quality machined alloy slot-in trumpet for Weber DCOE40 carburetors.

Made from lightweight solid aluminum- no welding or gluing.

To suit Weber DCOE 40mm carburettors ONLY (!)

Please make sure that your DCOE's are suitable for slot-in trumpets as not all versions are!

26 mm long, from fitting face of carburetor to end of flare.

58 mm maximum diameter at the flared end.

When you equip your DCOE40's with these slide-in trumpets for the first time, you require the special tabs so secure the trumpets in place.
For your convenience, you can order these tabs right along with your trumpets by selecting them through the drop-box above.

Required quantity per carburettor: 2

This is number 18 in the drawing.

(18) 26 mm long Slot-In Trumpet for Weber DCOE40 carburetors

W40/30G
(18) 30 mm long Slot-In Trumpet with Gauze for Weber DCOE40 carburetors

(18) 30 mm long Slot-In Trumpet with Gauze for Weber DCOE40 carburetors

Top quality machined alloy slot-in trumpet for Weber DCOE40 carburetors.

The trumpet is made from lightweight solid aluminum - no welding or gluing.

To suit Weber DCOE 40 mm carburettors ONLY (!)

Please make sure that your DCOE's are suitable for slot-in trumpets as not all versions are!

30 mm long from fitting face of carburetor to end of flare

65 mm maximum diameter at the flared end

The domed gauze adds approximately 15 mm to the length of the trumpet thus making it approximately 45 mm in length from the face of the carburetor.

When you equip your DCOE40's with these slide-in trumpets for the first time, you require the special tabs so secure the trumpets in place.
For your convenience, you can order these tabs right along with your trumpets by selecting them through the drop-box above.

Required quantity per carburettor: 2

This is number 18 in the drawing.

(18) 30 mm long Slot-In Trumpet with Gauze for Weber DCOE40 carburetors

W40/60G
(18) 60 mm long Slot-In Trumpet with Gauze for Weber DCOE40 carburetors

(18) 60 mm long Slot-In Trumpet with Gauze for Weber DCOE40 carburetors

Top quality machined alloy slot-in trumpet for Weber DCOE40 carburetors.

The trumpet is made from lightweight solid aluminum - no welding or gluing.

To suit Weber DCOE 40 mm carburettors ONLY (!)

Please make sure that your DCOE's are suitable for slot-in trumpets as not all versions are!

60 mm long from fitting face of carburetor to end of flare

65 mm maximum diameter at the flared end

The domed gauze adds approximately 15 mm to the length of the trumpet thus making it approximately 75 mm in length from the face of the carburetor.

When you equip your DCOE40's with these slide-in trumpets for the first time, you require the special tabs so secure the trumpets in place.
For your convenience, you can order these tabs right along with your trumpets by selecting them through the drop-box above.

Required quantity per carburettor: 2

This is number 18 in the drawing.

(18) 60 mm long Slot-In Trumpet with Gauze for Weber DCOE40 carburetors

99901.165
(19) Nut for Weber DCOE carburetors

(19) Nut for Weber DCOE carburetors

Nut to secure the trumpets or air filter on the standard studs on the Weber DCOE and DCO/SP series carburetors.

Required quantity per carburettor: 4

This is number 19 in the drawing.

 

 

 

(19) Nut for Weber DCOE carburetors

99901.138
(20) Spring Washer for Weber DCOE carburetors

(20) Spring Washer for Weber DCOE carburetors

Spring washer for the nut to secure the trumpets or air filter on the standard studs on the Weber DCOE and DCO/SP series carburetors.

Required quantity per carburettor: 4

This is number 20 in the drawing.

 

 

 

(19) Nut for Weber DCOE carburetors

DCOETrumpetTab
(21) Trumpet Tab for Weber DCOE carburetors

(21) Trumpet Tab for Weber DCOE carburetors

Special shape & size tab to secure slot-in trumpets on the Weber DCOE and DCO/SP series carburetors.

Please note that each specific model of these carburetors requires a special tab and that these are NOT interchangeable.

These tabs are ONLY required for slot-in trumpets.

Required quantity per carburettor: 4

This is number 21 in the drawing.

(21) Trumpet Tab for Weber DCOE carburetors

72302
(22) Choke / Venturi for Weber DCOE40 carburetors

(22) Choke / Venturi for Weber DCOE40 carburetors

Venturi (or choke if you want) for the Weber DCOE40 series carburetors.

These chokes are suitable for the Weber DCOE 40 and some of the DCOM models.

Dimensions:

  • 44.9 mm diameter at the widest part
  • 43 mm at the shoulder
  • 37.5 mm long

These chokes are NOT fitted with a locating pin as this is not required.

Available in the following sizes:

  • 26 mm internal diameter
  • 28 mm internal diameter
  • 30 mm internal diameter
  • 32 mm internal diameter
  • 34 mm internal diameter
  • 36 mm internal diameter

Other sizes are available on special request.
Please contact us with your requirements.

Required quantity per carburettor: 2

This is number 22 in the drawing.

(22) Choke / Venturi for Weber DCOE40 carburetors

72116
(22) Choke / Venturi for Weber DCOE45 carburetors

(22) Choke / Venturi for Weber DCOE45 carburetors

Venturi (or choke if you want) for the Weber DCOE45 series carburetors.

Dimensions:

  • 47.8 mm diameter at the widest part
  • 42.9 mm at the shoulder

Available in the following sizes:

  • 28 mm internal diameter - available from our stock
  • 30 mm internal diameter
  • 32 mm internal diameter
  • 33 mm internal diameter
  • 34 mm internal diameter - available from our stock
  • 35 mm internal diameter
  • 36 mm internal diameter - available from our stock
  • 37 mm internal diameter
  • 38 mm internal diameter
  • 40 mm internal diameter

Sizes that are not available from our stock have, on average, a leadtime of 5 working days.

Required quantity per carburettor: 2

This is number 22 in the drawing.

(22) Choke / Venturi for Weber DCOE45 carburetors

52155.003
(24) Venturi grub screw locking washer for Weber 45DCOE carburetors

(24) Venturi grub screw locking washer for Weber 45DCOE carburetors

Special lock tab washer for the venturi grub screw on the Weber 45DCOE (only!) carburetors.

Please note that this is ONLY used on the 45DCOE and NOT on the 40DCOE or 48 DCOE.

The special shape of the tab washer allows for additional securing by safety wire.

Required quantity per carburetor: 2

This is item number 24 in the drawing.

(24) Venturi grub screw locking washer for Weber 45DCOE carburetors

14945.003
(25) Air By-Pass Screw Cap for Weber DCOE carburetors

(25) Air By-Pass Screw Cap for Weber DCOE carburetors

Plastic cap to cover the Air By-Pass Screw on the Weber DCOE carburetors.

Prevents unwanted tempering with these important screws.

Please note that not every DCOE is equipped with these by-pass screws.

Required quantity per carburetor (when applicable): 2

This is item number 25 in the drawing.

(25) Air By-Pass Screw Cap for Weber DCOE carburetors

64750.002
(26) Air By-Pass Screw on Weber DCOE carburetors

(26) Air By-Pass Screw on Weber DCOE carburetors

Air By-Pass Screw for the Weber DCOE carburetors.

Please note that not every DCOE is equipped with these by-pass screws.

Required quantity per carburetor (when applicable): 2

This is item number 26 in the drawing.

 

(26) Air By-Pass Screw on Weber DCOE carburetors

34705.001
(27) Lock Nut for Air By-Pass Screw on Weber DCOE carburetors

(27) Lock Nut for Air By-Pass Screw on Weber DCOE carburetors

Lock Nut for Air By-Pass Screw for the Weber DCOE carburetors.

Lock-nut that is used to secure the setting of the air by-pass screw on the DCOE.

Please note that not every DCOE is equipped with these by-pass screws.

Required quantity per carburetor: 2

This is item number 27 in the drawing.

(27) Lock Nut for Air By-Pass Screw on Weber DCOE carburetors

64840.003
(28) Venturi grub screw for Weber 45DCOE carburetors

(28) Venturi grub screw for Weber 45DCOE carburetors

Special venturi grub screw on the Weber 45DCOE (only!) carburetors.

Please note that this is ONLY used on the 45DCOE and NOT on the 40DCOE or 48 DCOE.

The head is pre-dilled to facilitate securing by safety wire.

It also uses tab washer 52155.003 (number 24 on the drawing).

Required quantity per carburetor: 4

This is item number 28 in the drawing.

(28) Venturi grub screw for Weber 45DCOE carburetors

55520.004
(31) Spindle Nut Lock Washer for Weber DCOE carburetors

(31) Spindle Nut Lock Washer for Weber DCOE carburetors

Nut lock washer for the Weber DCOE carburetors.

We advise to replace these lock tabs after each use as they are prone to metal fatigue and might lose their locking qualities as a consequence.

Required quantity per carburetor: 2

This is item number 31 in the drawing.

(31) Spindle Nut Lock Washer for Weber DCOE carburetors

34710.003
(32) Nut for Weber DCOE carburetors

(32) Nut for Weber DCOE carburetors

Nut for the Weber DCOE carburetors.

Is used as a spindle nut as well as a lock nut on the venturi grub screw.

Required quantity per carburetor: 4

This is item number 32 in the drawing.

 

 

(32) Nut for Weber DCOE carburetors

64005.044
(33) Butterfly Valve for Weber DCOE40 carburetors - 78°

(33) Butterfly Valve for Weber DCOE40 carburetors - 78°

This is a 78° butterfly valve for the 40mm Weber DCOE carburetors.

We strongly advise against experimenting with different angles so please replace damaged or missing butterfly valves with the same type and angle ONLY.

Required quantity per carburettor: 2

This is item number 33 in the drawing.

If you are replacing butterfly valves, please ALWAYS use new screws!
For Italian-Made Weber DCOE's: 64570.009
For Spanish-made Weber DCOE's: S57392022

For your convenience, you can order new screws right along with your butterfly valve by simply selecting them through the drop box

(33) Butterfly Valve for Weber DCOE40 carburetors - 78°

64005.059
(33) Butterfly Valve for Weber DCOE40 carburetors - 79°30

(33) Butterfly Valve for Weber DCOE40 carburetors - 79°30

This is a 79°30 butterfly valve for the 40mm Weber DCOE carburetors.

We strongly advise against experimenting with different angles so please replace damaged or missing butterfly valves with the same type and angle ONLY.

Required quantity per carburettor: 2

This is item number 33 in the drawing.

If you are replacing butterfly valves, please ALWAYS use new screws!
For Italian-Made Weber DCOE's: 64570.009
For Spanish-made Weber DCOE's: S57392022

For your convenience, you can order new screws right along with your butterfly valve by simply selecting them through the drop box

(33) Butterfly Valve for Weber DCOE40 carburetors - 79°30

64005.084
(33) Butterfly Valve for Weber DCOE45 carburetors

(33) Butterfly Valve for Weber DCOE45 carburetors

This is a butterfly valve for the 45mm Weber DCOE carburetors.

Required quantity per carburettor: 2

This is item number 33 in the drawing.

If you are replacing butterfly valves, please ALWAYS use new screws!
For Italian-Made Weber DCOE's: 64570.009
For Spanish-made Weber DCOE's: S57392022

For your convenience, you can order new screws right along with your butterfly valve by simply selecting them through the drop box

(33) Butterfly Valve for Weber DCOE45 carburetors

64005.108
(33) Butterfly Valve for Weber DCO/SP 48 carburetors

(33) Butterfly Valve for Weber DCO/SP 48 carburetors

This is a butterfly valve for the 48mm Weber DCO/SP carburetors.

Required quantity per carburettor: 2

This is item number 33 in the drawing.

If you are replacing butterfly valves, please ALWAYS use new screws!
For Italian-Made Weber DCOE's: 64570.009
For Spanish-made Weber DCOE's: S57392022

For your convenience, you can order new screws right along with your butterfly valve by simply selecting them through the drop box

(33) Butterfly Valve for Weber DCO/SP 48 carburetors

64570.009
(35) Countersunk Screw for Butterfly Valve on Italian Weber DCOE carburetors

(35) Countersunk Screw for Butterfly Valve on Italian Weber DCOE carburetors

This is a counter sunk screw for the butterfly valve on the Italian-made Weber DCOE carburetors.

Please note that the Spanish-made DCOE's use screw S57392022.

Required quantity per carburetor: 4

This is item number 35 in the drawing.

 

(35) Countersunk Screw for Butterfly Valve on Italian Weber DCOE carburetors

S57392022
(35) Screw for Butterfly Valve on Spanish Weber DCOE carburetors

(35) Screw for Butterfly Valve on Spanish Weber DCOE carburetors

This is the screw to secure the butterfly valve on the Spanish-made Weber DCOE carburetors.

Please note that the Italian-made DCOE's use screw 64570.009.

Required quantity per carburetor: 4

This is item number 35 in the drawing.

(35) Screw for Butterfly Valve on Spanish Weber DCOE carburetors

41640.06901
(36) Bottom Cover gasket for Weber DCOE carburetors

(36) Bottom Cover gasket for Weber DCOE carburetors

Extra-resilient Bottom Cover Gasket for Weber DCOE carburetors.

Required quantity per carburettor: 1

This is item number 36 in the drawing.

 

 

 

 

(36) Bottom Cover gasket for Weber DCOE carburetors

64570.009
(39) Spindle Cover Screw for Weber DCOE carburetors

(39) Spindle Cover Screw for Weber DCOE carburetors

Spindle Cover Screw for the Weber DCOE carburetors.

Used on early DCOE's with countersunk holes in the spindle cover.

Required quantity per carburetor: 2

This is item number 39 in the drawing.

 

 

(39) Spindle Cover Screw for Weber DCOE carburetors

32556.018
(42) Choke Activating Mechanism for Weber DCOE carburetors

(42) Choke Activating Mechanism for Weber DCOE carburetors

Choke activating mechanism for the Weber DCOE carburetors.

Complete assembly as depicted in the photographs.

Required quantity per carburettor: 1

This is item number 42 in the drawing.

 

(42) Choke Activating Mechanism for Weber DCOE carburetors

32556.018REPAIR
Choke Activating Mechanism REPAIR KIT for Weber DCOE carburetors

Choke Activating Mechanism REPAIR KIT for Weber DCOE carburetors

Repair kit for the choke activating mechanism for the Weber DCOE carburetors.

Set of gears, as shown in photo 1, to replace worn or damaged gears in the choke piston lifting mechanism.

Photo 2 is for illustration purposes only and shows the set installed in the activating mechanism.

Required quantity per carburettor: 1

This is item is NOT in the drawing.

Choke Activating Mechanism REPAIR KIT for Weber DCOE carburetors

79701
(43) Pump Exhaust - Spill Valve for Weber DCOE carburetors

(43) Pump Exhaust - Spill Valve for Weber DCOE carburetors

Pump Exhaust - Spill Valve for Weber DCOE carburetors.

Available from stock in sizes:

  • 35
  • 40
  • 45
  • 50
  • 55
  • 60
  • 65
  • 70
  • 80
  • 90
  • 100

Required quantity per carburettor: 1

This is item number 43 in the drawing.

(43) Pump Exhaust - Spill Valve for Weber DCOE carburetors

41565.045
(44) O-Ring for the Idle Screw on Weber DCOE carburetors

(44) O-Ring for the Idle Screw on Weber DCOE carburetors

Viton o-ring to seal the idle screws on the Weber DCOE series carburetors.

Required quantity per carburetor: 2

This is item number 44 in the drawing.

 

 

(44) O-Ring for the Idle Screw on Weber DCOE carburetors

45048.007
(45) Lotus Lever Assembly for Weber DCOE carburetors

(45) Lotus Lever Assembly for Weber DCOE carburetors

Cable activated lever assembly as used by Lotus Automobiles for the Weber DCOE carburetors.

This assembly matches up with balance lever assembly 45048.005.

Please note the angle of the slot for the throttle shaft. This differs per application!

Required quantity per set of carburettors: 1

This is item number 45 in the drawing.

It uses LotusBarrel to hook up the accelerator cable.

(45) Lotus Lever Assembly for Weber DCOE carburetors

lotusbarrel
Lotus lever cable barrel

Lotus lever cable barrel

Lotus lever cable barrel for use with Lotus type levers, to retain throttle cable.

This item is NOT in the drawing.

Required quantity per set of 2 carburettors: 1

It matches Lotus Throttle Lever 45048.007 (item 45 in this list)

Lotus lever cable barrel

58000.006
(46) Mixture Screw Cup Washer for Weber DCOE carburetors

(46) Mixture Screw Cup Washer for Weber DCOE carburetors

Mixture screw cup washer for the Weber DCOE series carburetors.

Required quantity per carburettor: 1

This is item number 46 in the drawing.

 

 

 

(46) Mixture Screw Cup Washer for Weber DCOE carburetors

47600.007
(47) Spring for Throttle Stop Screw and Idle Screw on Weber DCOE carburetors

(47) Spring for Throttle Stop Screw and Idle Screw on Weber DCOE carburetors

Spring that secures the setting on the throttle stop screw on the Weber DCOE carburetors.

This spring is also used to secure the setting on the idle screws.

Required quantity per carburetor: depending on application

This is item number 47 in the drawing.

 

(47) Spring for Throttle Stop Screw and Idle Screw on Weber DCOE carburetors

64590.008
(48) Vacuum Take Off Cover Plug for Weber DCOE carburetors

(48) Vacuum Take Off Cover Plug for Weber DCOE carburetors

Vacuum Take Off Cover Plug for Weber DCOE carburetors.

Plugs the connection for vacuum lines or synchro meters when these are not in use.

Required quantity per carburettor: 2

This is item number 48 in the drawing.

 

(48) Vacuum Take Off Cover Plug for Weber DCOE carburetors

41535.021
(49) Alloy Pump Jet Washer for Weber DCOE carburetors

(49) Alloy Pump Jet Washer for Weber DCOE carburetors

Alloy washer that seals the connection of the pump jet in the carburettor body on the Weber DCOE carburetors.

This washer is often neglected but should basically be renewed every time you remove the pump jet to assure a proper seal.

Required quantity per carburetor: 2

This is item number 49 in the drawing.

(49) Alloy Pump Jet Washer for Weber DCOE carburetors

47605.027
(50) Throttle Return Spring for Weber DCOE carburetors

(50) Throttle Return Spring for Weber DCOE carburetors

Throttle return spring for the Weber DCOE carburetors.

Required quantity per carburettor: 1

This is item number 50 in the drawing.

 

 

(50) Throttle Return Spring for Weber DCOE carburetors

52210.006
(51) Spring Anchor Plate for Weber DCOE carburetors

(51) Spring Anchor Plate for Weber DCOE carburetors

Anchor plate for the throttle return spring for the Weber DCOE carburetors.

Required quantity per carburettor: 1

This is item number 51 in the drawing.

 

 

(51) Spring Anchor Plate for Weber DCOE carburetors

64625.012
(52) Throttle Stop Screw for Weber DCOE and DCO/SP carburetors

(52) Throttle Stop Screw for Weber DCOE and DCO/SP carburetors

Throttle stop screw for the Weber DCOE and DCO / SP carburetor.

Required quantity per carburettor: depending on set-up

This is item number 52 in the drawing.

 

 

(52) Throttle Stop Screw for Weber DCOE and DCO/SP carburetors

58602.003
(53) Pump Plunger for Weber DCOE carburetors

(53) Pump Plunger for Weber DCOE carburetors

Pump plunger for the Weber DCOE carburetors.

Required quantity per carburettor: 1

This is item number 53 in the drawing.

 

 

 

 

(53) Pump Plunger for Weber DCOE carburetors

64330.003
(54) Choke Piston for Weber DCOE carburetors

(54) Choke Piston for Weber DCOE carburetors

Choke (or starter) piston for the Weber DCOE carburetor.

Required quantity per carburetor: 2

This is item number 54 in the drawing.

 

 

(54) Choke Piston for Weber DCOE carburetors

47600.105
(55) Choke - Starter Piston Spring for Weber DCOE carburetors

(55) Choke - Starter Piston Spring for Weber DCOE carburetors

Choke (or Starter) Piston Spring for Weber DCOE carburetors.

Allows the starter piston (or choke piston if you want) to easily return to its original position and seat properly.

Required quantity per carburettor: 2

This is item number 55 in the drawing.

 

(55) Choke - Starter Piston Spring for Weber DCOE carburetors

64750.001
(56) Short Mixture Screw for Weber DCOE carburetors

(56) Short Mixture Screw for Weber DCOE carburetors

Mixture screw for the Weber DCOE carburetor.

This is the short version with an overall length of 30 mm.

Required quantity per carburettor: 2

This is item number 56 in the drawing.

 

(56) Short Mixture Screw for Weber DCOE carburetors

64750.003
(56) Long Mixture Screw for Weber DCOE carburetors

(56) Long Mixture Screw for Weber DCOE carburetors

Mixture screw for the Weber DCOE carburetors.

This is the long version with an overall length of 33 mm.
It uses spring number 47 to secure its setting.

Required quantity per carburettor: 2

This is item number 56 in the drawing.

 

(56) Long Mixture Screw for Weber DCOE carburetors

64750.058
(56) Mixture Screw for Weber DCO/SP carburetors

(56) Mixture Screw for Weber DCO/SP carburetors

Mixture screw for the Weber DCO/SP carburetor.

This is the version that uses an o-ring rather than a spring to lock its setting.

Required quantity per carburetor: 2

This is item number 56 in the drawing.

 

(56) Mixture Screw for Weber DCO/SP carburetors

76801
(57) Pump Jet for Weber DCOE carburetors

(57) Pump Jet for Weber DCOE carburetors

Pump jet for the Weber DCOE carburetors.

Available in size:

  • 30
  • 35
  • 40
  • 45
  • 50
  • 55
  • 60
  • 65
  • 70
  • 75

Required quantity per carburetor: 2

This is item number 57 in the drawing.

These jets use an alloy washer which should be renewed along with the jets.
You can find this washer HERE.

(57) Pump Jet for Weber DCOE carburetors

41565.009
(58) Pump jet cover O ring for Weber DCOE carburetors

(58) Pump jet cover O ring for Weber DCOE carburetors

Pump jet cover O ring for the Weber DCOE carburetors.

Required quantity per carburetor: 2

This is item number 58 in the drawing.

 

 

(58) Pump jet cover O ring for Weber DCOE carburetors

61015.008
(59) Pump Jet Cover for Weber DCOE carburetors

(59) Pump Jet Cover for Weber DCOE carburetors

Pump jet cover for the Weber DCOE carburetors.

Required quantity per carburettor: 2

This is item number 59 in the drawing.

 

 

(59) Pump Jet Cover for Weber DCOE carburetors

47600.064
(60) Pump Rod Spring for Weber DCOE carburetors

(60) Pump Rod Spring for Weber DCOE carburetors

Pump rod spring for Weber DCOE carburetors.

Required quantity per carburettor: 1

This is item number 60 in the drawing.

 

 

 

 

(60) Pump Rod Spring for Weber DCOE carburetors

10410
(61) Pump Rod for Weber DCOE carburetors

(61) Pump Rod for Weber DCOE carburetors

Pump rod for the Weber DCOE carburetors.

Is supplied including a new retaining clip (number 89 in the drawing).

This rod is available in the following versions:

  • 10410.004
  • 10410.012
  • 10410.015
  • 10410.016
  • 10410.018
  • 10410.024
  • 10410.025
  • 10410.026

Please click HERE for the Weber DCOE Pump Rod Specifications.

Please note that the dimensions of this pump rod directly influence the quantity of fuel that is injected through the pump jets.

Required quantity per carburettor: 1

This is item number 61 in the drawing.

(61) Pump Rod for Weber DCOE carburetors

58300.003
(63) Pump Demand Ball Valve for Weber DCOE carburetors

(63) Pump Demand Ball Valve for Weber DCOE carburetors

Pump demand ball valve for the Weber DCOE carburetors.

Ball bearing of the correct weight and size for the pump mechanism.

Required quantity per carburetor: 2

This is item number 63 in the drawing.

(63) Pump Demand Ball Valve for Weber DCOE carburetors

52730.001
(64) Pump Valve Weight for Weber DCOE carburetors

(64) Pump Valve Weight for Weber DCOE carburetors

Pump valve weight for the Weber DCOE carburetors.

Required quantity per carburetor: 2

This is item number 64 in the drawing.

 

 

(64) Pump Valve Weight for Weber DCOE carburetors

61015.006
(65) Pump demand valve cover plug for Weber DCOE carburetors

(65) Pump demand valve cover plug for Weber DCOE carburetors

Pump demand valve cover plug for the Weber DCOE carburetors.

Required quantity per carburetor: 2

This is item number 65 in the drawing.

 

 

(65) Pump demand valve cover plug for Weber DCOE carburetors

41530.031
(67) Fiber Seal for Fuel Banjo for Weber DCOE carburetors

(67) Fiber Seal for Fuel Banjo for Weber DCOE carburetors

Fiber Seal for Fuel Banjo for the Weber DCOE carburetor.

This is the seal that fits between the banjo and carburetor body.

Also fits the Weber DCO / SP.

Required quantity per carburettor: 1

This is item number 69 in the drawing.

 

(67) Fiber Seal for Fuel Banjo for Weber DCOE carburetors

10536.035
(68) Single Fuel Union for Weber DCOE and DCO/SP carburetors

(68) Single Fuel Union for Weber DCOE and DCO/SP carburetors

Single 90 degrees fuel union for the Weber DCOE carburetors.

Connects to the regular 8 mm internal diameter fuel line.

Also fits the Weber DCO / SP.

Required quantity per set of carburetors: 1

This is item number 68 in the drawing.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

(68) Single Fuel Union for Weber DCOE and DCO/SP carburetors

41530.024
(69) Fiber Seal for Fuel Banjo for Weber DCOE carburetors

(69) Fiber Seal for Fuel Banjo for Weber DCOE carburetors

Fiber Seal for Fuel Banjo for the Weber DCOE carburetor.

This is the seal that fits between the banjo and the bolt.

Also fits the Weber DCO / SP.

Required quantity per carburetor: 1

This is item number 69 in the drawing.

 

(69) Fiber Seal for Fuel Banjo for Weber DCOE carburetors

12715.008
(70) Fuel Union Bolt for Weber DCOE carburetors

(70) Fuel Union Bolt for Weber DCOE carburetors

Fuel union bolt for the Weber DCOE carburetors.

Also fits the Weber DCO / SP.

Required quantity per carburettor: 1

This is item number 70 in the drawing.

 

 

(70) Fuel Union Bolt for Weber DCOE carburetors

61015.009
(71) Progression Hole Cover Screw for Weber DCOE carburetors

(71) Progression Hole Cover Screw for Weber DCOE carburetors

Progression Hole Cover Screw for Weber DCOE carburetors.

Used to plug the bore for the progression holes.

Thread: 9 mm x 1 mm.
Total height: 7.37 mm

Please note that there are two different versions available, the other being 61015.002.

Required quantity per carburettor: 2

This is item number 71 in the drawing.

(71) Progression Hole Cover Screw for Weber DCOE carburetors

61015.002
(71) Progression Hole Cover Screw for Weber DCOE carburetors

(71) Progression Hole Cover Screw for Weber DCOE carburetors

Progression Hole Cover Screw for Weber DCOE carburetors.

Used to plug the bore for the progression holes.

Thread: 8 mm x 1 mm.
Total height: 7.65 mm

Please note that there are two different versions available, the other being 61015.009.

Required quantity per carburettor: 2

This is item number 71 in the drawing.

(71) Progression Hole Cover Screw for Weber DCOE carburetors

52000.001
(72) Float Pivot Pin for Weber DCOE carburetors

(72) Float Pivot Pin for Weber DCOE carburetors

Float pivot pin for the Weber DCOE carburetors.

Can be used on both the brass float as well as on the plastic float.

Required quantity per carburetor: 1

This is item number 72 in the drawing.

 

(72) Float Pivot Pin for Weber DCOE carburetors

64605.017
(73) Choke cable clamp screw for Weber DCOE carburetors

(73) Choke cable clamp screw for Weber DCOE carburetors

Choke cable clamp screw for Weber DCOE carburetors.

Special-sized screw to secure the outer choke cable to the choke activating mechanism.

Required quantity per carburettor: 1

This is item number 73 in the drawing.

 

 

(73) Choke cable clamp screw for Weber DCOE carburetors

52130.003
(76) Internal Plate for Weber DCOE carburetors

(76) Internal Plate for Weber DCOE carburetors

Internal plate for the Weber DCOE and DCO/SP carburetors.

Required quantity per carburettor: 1

This is item number 76 in the drawing.

 

 

 

 

(76) Internal Plate for Weber DCOE carburetors

55510.128
(77) Thin Washer for Weber DCOE carburetors

(77) Thin Washer for Weber DCOE carburetors

Thin spacer for the Weber DCOE and DCO/SP carburetors.

Required quantity per carburettor: 2

This is item number 77 in the drawing.

 

 

 

 

(77) Thin Washer for Weber DCOE carburetors

7490
(78) Spindle bearing for Weber DCOE carburetors

(78) Spindle bearing for Weber DCOE carburetors

Spindle bearing for the Weber DCOE and DCO/SP carburetors.

Sealed and lubricated for life.

Required quantity per carburettor: 2

This is item number 78 in the drawing.

 

 

 

(78) Spindle bearing for Weber DCOE carburetors

41575.025
(79) Spindle Seal for Weber DCOE carburetors

(79) Spindle Seal for Weber DCOE carburetors

Spindle O-Ring Seal for the Weber DCOE and DCO/SP series carburetors.

Used on those carburettors that are not equipped with the leather seal.

Required quantity per carburettor: 2

This is item number 79 in the drawing.

 

(79) Spindle Seal for Weber DCOE carburetors

52135.024
(80) Spring Cover Plate for Weber DCOE carburetors

(80) Spring Cover Plate for Weber DCOE carburetors

Spring cover plate for the Weber DCOE carburetors.

Covers the throttle return spring and protects it dirt and direct moisture.

With inspection hole and chamfered screw holes.

Required quantity per carburetor: 1

This is item number 80 in the drawing.

 

(80) Spring Cover Plate for Weber DCOE carburetors

41640.021
(81) Spring Cover Plate Gasket for Weber DCOE carburetors

(81) Spring Cover Plate Gasket for Weber DCOE carburetors

Gasket for the spring cover plate for the Weber DCOE carburetors.

With inspection hole.

Required quantity per carburetor: 1

This is item number 81 in the drawing (is also listed under number 41 !).

 

(81) Spring Cover Plate Gasket for Weber DCOE carburetors

58445.001
(82) Spindle Roll Pin for Weber DCOE carburetors

(82) Spindle Roll Pin for Weber DCOE carburetors

Spindle roll pin for the Weber DCOE carburetors.

Secures the pump actuating cam onto the throttle spindle.

Required quantity per carburettor: 1

This is item number 82 in the drawing.

 

 

(82) Spindle Roll Pin for Weber DCOE carburetors

32374.008
(83) Bottom Cover for Weber DCOE carburetors

(83) Bottom Cover for Weber DCOE carburetors

Newly arrived Bottom Cover for Weber DCOE carburetors

Bottom Cover for the Weber DCOE carburetors.

Required quantity per carburettor: 1

This is item number 83 in the drawing.

 

(83) Bottom Cover for Weber DCOE carburetors

55555.010
(86) Spindle End Cover for Weber DCOE carburetors

(86) Spindle End Cover for Weber DCOE carburetors

Spindle end cover for the Weber DCOE series carburetors.

Required quantity per carburettor: 2

This is item number 86 in the drawing.

 

 

 

 

(86) Spindle End Cover for Weber DCOE carburetors

64830.006
(88) Venturi Grub Screw for 151 Type Weber DCOE40 carburetors

(88) Venturi Grub Screw for 151 Type Weber DCOE40 carburetors

Grub screw used to locate the auxiliary venturi on the Spanish-made 151 type Weber DCOE 40 carburetors.

Required quantity per carburettor: 2

This is item number 88 in the drawing.

 

 

(88) Venturi Grub Screw for 151 Type Weber DCOE40 carburetors

52140.004
(89) Pump rod retaining plate for Weber DCOE carburetors

(89) Pump rod retaining plate for Weber DCOE carburetors

Pump rod retaining plate for Weber DCOE carburetors.

Required quantity per carburettor: 1

This is item number 89 in the drawing.

 

 

(89) Pump rod retaining plate for Weber DCOE carburetors

52030.003
(90) Choke Spring Retainer for Weber DCOE carburetors

(90) Choke Spring Retainer for Weber DCOE carburetors

Choke Spring Retainer for Weber DCOE carburetors.

Secures the choke piston spring in its bore.

Required quantity per carburettor: 2

This is item number 90 in the drawing.

 

 

 

(90) Choke Spring Retainer for Weber DCOE carburetors

41570.001
(91) Leather Dust Cover for Weber DCOE carburetors with open bearings

(91) Leather Dust Cover for Weber DCOE carburetors with open bearings

Leather dust cover seal for the Weber DCOE carburetors.

This leather cover is used on the Italian-made versions with open bearings.

Required quantity per carburettor: 2

This is item number 91 in the drawing; is also listed under number 103.

Depending on the Ladies and Gentlemen at Weber, these seals are supplied in either Black or Brown color which has no further impact on the quality.

(91) Leather Dust Cover for Weber DCOE carburetors with open bearings

45048.005
(92) Balance Lever Assembly for Weber DCOE and DCO/SP carburetors

(92) Balance Lever Assembly for Weber DCOE and DCO/SP carburetors

Balance lever assembly for the Weber DCOE and DCO SP carburetors.

This assembly matches up with the standard Lotus type main lever 45048.007.

Please note the angle of the slot for the throttle shaft. This differs per application!

Required quantity per set of carburetors: 1

This is item number 92 in the drawing.

(92) Balance Lever Assembly for Weber DCOE and DCO/SP carburetors

10536.034
(93) T Fuel Union for Weber DCOE and DCO/SP carburetors

(93) T Fuel Union for Weber DCOE and DCO/SP carburetors

Double ("T") fuel union for the Weber DCOE carburetors.

Connects to the regular 8 mm internal diameter fuel line.

Also fits the Weber DCO / SP.

Required quantity per set of carburetors: 1

This is item number 93 in the drawing.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

(93) T Fuel Union for Weber DCOE and DCO/SP carburetors

45041.009
(97) Ball Lever for Weber DCOE and DCO/SP carburetors

(97) Ball Lever for Weber DCOE and DCO/SP carburetors

Ball lever for the Weber DCOE and DCO/SP carburetors.

This ball lever matches up with balance lever 45048.005.

Please note the angle of the slot for the throttle shaft. This differs per application!

Required quantity per set of carburetors: 1

This is item number 97 in the drawing.

(97) Ball Lever for Weber DCOE and DCO/SP carburetors

45034.044
(98) Left Hand Ball Lever for a single Weber DCOE and DCO/SP carburetor

(98) Left Hand Ball Lever for a single Weber DCOE and DCO/SP carburetor

Left Hand Ball Lever for a single Weber DCOE and DCO/SP carburetor.

This lever is intended to be mounted on the LEFT hand side of either DCOE or DCO/SP carburetor.
To avoid confusion: that is seen from the airfilter side of the carburetor.

It has no provisions for a balance lever as it is intended for a single carburettor.

Required quantity per carburetor: 1

This is item number 98 in the drawing.

(98) Left Hand Ball Lever for a single Weber DCOE and DCO/SP carburetor

CUA001
(100) Straight Fuel Union Set for Weber DCOE carburetors

(100) Straight Fuel Union Set for Weber DCOE carburetors

Straight Fuel Union Set for the Weber DCOE carburetors.

Connects to the regular fuel line with 8 mm internal diameter.

The set consists of a straight fuel union, banjo bolt and two copper washers.
These represent items 67, 68, 69 / 93 and 70 in the drawing.

Also fits the Weber DCO / SP.

Required quantity per carburettor: 1

This is item number 100 in the drawing.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

(100) Straight Fuel Union Set for Weber DCOE carburetors

99901.632
(101) Main Lever Assembly for Weber DCOE and DCO/SP carburetors

(101) Main Lever Assembly for Weber DCOE and DCO/SP carburetors

Main command lever for the Weber DCOE and DCO SP carburetors.

This lever matches up with balance lever assembly 45048.149.

Required quantity per set of carburetors: 1

This is item number 101 in the drawing.

 

(101) Main Lever Assembly for Weber DCOE and DCO/SP carburetors

M1281
(101) Mangoletsi Main Lever Assembly with extra long tongue for Weber DCOE and DCO/SP carburetors

(101) Mangoletsi Main Lever Assembly with extra long tongue for Weber DCOE and DCO/SP carburetors

Main command lever with extra long tongue for the Weber DCOE and DCO SP carburetors.

Designed and produced by John Mangoletsi's company "Mangoletsi Design", the lever is equipped with a 40 mm long "tongue" and can therewith be used in situations where the carburetor spacing is wider than standard.

This lever matches up with balance lever assembly 45048.149.

Required quantity per set of carburetors: 1

This is item number 101 in the drawing.

(101) Mangoletsi Main Lever Assembly with extra long tongue for Weber DCOE and DCO/SP carburetors

45048.149
(102) Balance Lever Assembly for Weber DCOE and DCO/SP carburetors

(102) Balance Lever Assembly for Weber DCOE and DCO/SP carburetors

Balance lever assembly for the the Weber DCOE and DCO SP carburetors.

This assembly matches up with main lever 99901.632.

Please note the angle of the slot for the throttle shaft. This differs per application!

Required quantity per set of carburetors: 1

This is item number 102 in the drawing.

(102) Balance Lever Assembly for Weber DCOE and DCO/SP carburetors

41570.001
(103) Leather Dust Cover for Weber DCOE carburetors with open bearings

(103) Leather Dust Cover for Weber DCOE carburetors with open bearings

Leather dust cover seal for the Weber DCOE carburetors.

This leather cover is used on the Italian-made versions with open bearings.

Required quantity per carburettor: 2

This is item number 103 in the drawing; is also listed under item number 91.

Depending on the Ladies and Gentlemen at Weber, these seals are supplied in either Black or Brown color which has no further impact on the quality.

(103) Leather Dust Cover for Weber DCOE carburetors with open bearings

58000.007
(105) Spindle End Cover for Weber DCOE carburetors

(105) Spindle End Cover for Weber DCOE carburetors

Spindle end cover for Italian made Weber DCOE carburetors.

This cover is NOT used on Spanish made Weber DCOE carbs.

Required quantity per carburetor: 2

This is item number 105 in the drawing.

 

(105) Spindle End Cover for Weber DCOE carburetors

4957
(107) Spring Washer for Weber DCOE carburetors

(107) Spring Washer for Weber DCOE carburetors

Spring washer for the top cover, or float chamber cover, of the Weber DCOE carburetors.

Required quantity per carburetor: 5

This is item number 107 in the drawing.

 

(107) Spring Washer for Weber DCOE carburetors

PMW236
Service Kit for 2 x Italian Weber 40 DCOE Carburetors

Service Kit for 2 x Italian Weber 40 DCOE Carburetors

Comprehensive service kit for the original ITALIAN-made (!) Weber 40 DCOE carburetors.

Contains the following parts to service 2 carburettors:

  • 2 x 150 Size Needle Valves
  • 4 Carburetor-to-Manifold Gaskets
  • 2 Float Chamber / Top Cover Gaskets
  • 2 Jet Cover Gaskets
  • 2 Spring Cover gaskets
  • 2 Nitrile Bottom Gaskets
  • 2 Fuel inlet filters
  • Various fiber washers
  • Various Aluminum washers
  • Various rubber (Vito) o-rings

This set is suitable for the above mentioned original-production Italian Weber DCOE's.

For the current production Spanish-made DCOE's, please use the WE437 kit.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as that is what you will be supplied with.
In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburetor rebuild kit.

Service Kit for 2 x Italian Weber 40 DCOE Carburetors

WE436
Comprehensive service kit for 1 x Italian Weber DCOE carburetor

Comprehensive service kit for 1 x Italian Weber DCOE carburetor

Comprehensive service kit for the ITALIAN-made (!) Weber DCOE carburetor.

This set is suitable for the following versions of the DCOE:

  • Weber 38 DCOE
  • Weber 40 DCOE
  • Weber 42 DCOE
  • Weber 45 DCOE
  • Weber 48 DCOE

For this service kit, the difference between the above versions is made by the size of the needle valve.
The original size can be found stamped in the brass needle valve seat which is mounted in the top cover of the carburetor.

We can offer the following sizes which you can select through the drop-box above:

  • 150
  • 175
  • 200
  • 225
  • 250
  • 300

Contains the following parts to service 1 carburetor:

  • Needle valve
  • Full gasket set
  • Pump jet washers
  • Fuel inlet filter
  • Float pivot pin
  • Mixture screws x 2, long taper for better adjustment
  • Throttle return spring

Suitable for the original Italian Weber DCOE's.
You can recognize these by the text "Made in Italy" on the top cover.

For the current production Spanish-made DCOE's, please use the WE437 kit.

Comprehensive service kit for 1 x Italian Weber DCOE carburetor

WE437
Comprehensive service kit for 1 x Spanish Weber DCOE carburetor

Comprehensive service kit for 1 x Spanish Weber DCOE carburetor

Comprehensive service kit for the SPANISH-made (!) Weber DCOE carburetor.

This set is suitable for the following versions of the DCOE:

  • Weber 40 DCOE
  • Weber 45 DCOE
  • Weber 48 DCOE
  • Weber DCO 2/SP 48
  • Weber DCO 2/SP 50
  • Weber DCO 2/SP 55

For this service kit, the difference between the above versions is made by the size of the needle valve.
The original size can be found stamped in the brass needle valve seat which is mounted in the top cover of the carburetor.

We can offer the following sizes which you can select through the drop-box above:

  • 150
  • 175
  • 200
  • 225
  • 250
  • 300

Contains the following parts to service 1 carburetor:

  • Needle valve
  • Full gasket set
  • Pump jet washers
  • Fuel inlet filter
  • Float pivot pin

Suitable for the current production Spanish Weber DCOE's.
You can recognize these by the text "Made in Spain" on the top cover.

For the original production Italian-made DCOE's, please use the WE436 kit.

Comprehensive service kit for 1 x Spanish Weber DCOE carburetor

DCOESK175NV
Budget service kit for 1 x Italian Weber DCOE carburetor

Budget service kit for 1 x Italian Weber DCOE carburetor

Budget service kit for the ITALIAN-made (!) Weber DCOE versions 38, 40, 42, 45 and 48.

Contains all required parts to service 1 carburetor.

Consists, amongst others, of the following parts:

  • 175 size Needle valve
  • Full gasket set
  • Fuel inlet filter
  • Float pivot pin
  • Parts diagram and float level setting instructions

Suitable for the original Italian Weber DCOE's.

For the current production Spanish-made DCOE's, please use the WE437 kit.

Budget service kit for 1 x Italian Weber DCOE carburetor

DCOE GASKET KIT
Gasket kit for 1 x Italian Weber DCOE carburetor

Gasket kit for 1 x Italian Weber DCOE carburetor

This is a simple gasket kit for the Weber DCOE 40 carburetors.

Contains all required gaskets seals and rings to freshen-up 1 carb.

Suitable for the original Italian-made Weber DCOE's.

 

 

Gasket kit for 1 x Italian Weber DCOE carburetor

PMW236
Service Kit for 2 x Weber 40 DCOE Carburetor for Fiat Ritmo 130 TC

Service Kit for 2 x Weber 40 DCOE Carburetor for Fiat Ritmo 130 TC

Comprehensive service kit for the original ITALIAN-made (!) Weber 40 DCOE 145 / 146 carburetors as used on the 1995 cc Fiat Ritmo 130 TC.

Contains the following parts to service 2 carburettors:

  • 2 x 150 Size Needle Valves
  • 4 Carburetor-to-Manifold Gaskets
  • 2 Float Chamber / Top Cover Gaskets
  • 2 Jet Cover Gaskets
  • 2 Spring Cover gaskets
  • 2 Nitrile Bottom Gaskets
  • 2 Fuel inlet filters
  • Various fiber washers
  • Various Aluminum washers
  • Various rubber (Vito) o-rings

This set is suitable for the above mentioned original-production Italian Weber DCOE's.

For the current production Spanish-made DCOE's, please use the WE437 kit.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as that is what you will be supplied with.
In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for 2 x Weber 40 DCOE Carburetor for Fiat Ritmo 130 TC

PMW236
Service Kit for 2 x Weber 40 DCOE Carburetor for Lotus Cortina

Service Kit for 2 x Weber 40 DCOE Carburetor for Lotus Cortina

Comprehensive service kit for the original ITALIAN-made (!) Weber 40 DCOE 145 / 146 carburetors as used on the 1967 - 1970 1558 cc Lotus Ford Cortina.

Contains the following parts to service 2 carburettors:

  • 2 x 150 Size Needle Valves
  • 4 Carburetor-to-Manifold Gaskets
  • 2 Float Chamber / Top Cover Gaskets
  • 2 Jet Cover Gaskets
  • 2 Spring Cover gaskets
  • 2 Nitrile Bottom Gaskets
  • 2 Fuel inlet filters
  • Various fiber washers
  • Various Aluminum washers
  • Various rubber (Vito) o-rings

This set is suitable for the above mentioned original-production Italian Weber DCOE's.

For the current production Spanish-made DCOE's, please use the WE437 kit.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as that is what you will be supplied with.
In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for 2 x Weber 40 DCOE Carburetor for Lotus Cortina

PMW236
Service Kit for 2 x Weber 40 DCOE Carburetor for Ford Escort 1600

Service Kit for 2 x Weber 40 DCOE Carburetor for Ford Escort 1600

Comprehensive service kit for the original ITALIAN-made (!) Weber 40 DCOE carburetors as used on, amongst other, the:

  • 1970 - 1975 Ford Escort 1600 - 1601 cc
  • 1968 - 1971 Ford Escort 1600 DOHC - 1558 cc

Contains the following parts to service 2 carburettors:

  • 2 x 150 Size Needle Valves
  • 4 Carburetor-to-Manifold Gaskets
  • 2 Float Chamber / Top Cover Gaskets
  • 2 Jet Cover Gaskets
  • 2 Spring Cover gaskets
  • 2 Nitrile Bottom Gaskets
  • 2 Fuel inlet filters
  • Various fiber washers
  • Various Aluminum washers
  • Various rubber (Vito) o-rings

This set is suitable for the above mentioned original-production Italian Weber DCOE's.

For the current production Spanish-made DCOE's, please use the WE437 kit.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as that is what you will be supplied with.
In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for 2 x Weber 40 DCOE Carburetor for Ford Escort 1600

PMW236
Service Kit for 2 x Weber 40 DCOE Carburetor for Ford Escort RS2000

Service Kit for 2 x Weber 40 DCOE Carburetor for Ford Escort RS2000

Comprehensive service kit for the original ITALIAN-made (!) Weber 40 DCOE carburetors as used on, amongst other, the:

  • 1975 - 1980 Ford Escort RS2000

Contains the following parts to service 2 carburettors:

  • 2 x 150 Size Needle Valves
  • 4 Carburetor-to-Manifold Gaskets
  • 2 Float Chamber / Top Cover Gaskets
  • 2 Jet Cover Gaskets
  • 2 Spring Cover gaskets
  • 2 Nitrile Bottom Gaskets
  • 2 Fuel inlet filters
  • Various fiber washers
  • Various Aluminum washers
  • Various rubber (Vito) o-rings

This set is suitable for the above mentioned original-production Italian Weber DCOE's.

For the current production Spanish-made DCOE's, please use the WE437 kit.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Please compare your old parts carefully with the ones in the picture as that is what you will be supplied with.
In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for 2 x Weber 40 DCOE Carburetor for Ford Escort RS2000

PMW100
Rebuild kit for 2 x Italian Weber 45 DCOE carburetors

Rebuild kit for 2 x Italian Weber 45 DCOE carburetors

Rebuild kit for 2 x Italian Weber 45 DCOE carburetors.

Comprehensive service kit for the ITALIAN-made (!) Weber DCOE carburetor in 45 mm version.
You can recognize these by the text "Made in Italy" on the top cover.

Contains the following parts to service 2 carburetor:

  • Fuel inlet filters
  • Needle valves in size 150
  • Comprehensive gasket set
  • Pump jet washers
  • Various aluminum washers
  • Various fiber washers

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Rebuild kit for 2 x Italian Weber 45 DCOE carburetors

PMW100
Rebuild kit for 2 x Italian Weber 45 DCOE 14 carburetors for Alfa Romeo Giulia TI Super

Rebuild kit for 2 x Italian Weber 45 DCOE 14 carburetors for Alfa Romeo Giulia TI Super

Rebuild kit for 2 x Italian Weber 45 DCOE 14 carburetors as used on the famous Alfa Romeo Giulia TI Super.

Comprehensive service kit for the ITALIAN-made (!) Weber DCOE carburetor in 45 mm version.
You can recognize these by the text "Made in Italy" on the top cover.

Contains the following parts to service 2 carburetor:

  • Fuel inlet filters
  • Needle valves in size 150
  • Comprehensive gasket set
  • Pump jet washers
  • Various aluminum washers
  • Various fiber washers

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of outstanding Italian manufacture.

Rebuild kit for 2 x Italian Weber 45 DCOE 14 carburetors for Alfa Romeo Giulia TI Super

CRK001A
Cold Start Device Elimination Kit for Weber DCOE carburetors

Cold Start Device Elimination Kit for Weber DCOE carburetors

This kit is designed to allow removal of the cold start functionality of the Weber DCOE series carburetors.

The requirement to do this is commonplace in situations where the engine can be warmed properly before use, typically off road or track day use, where the user wants to simplify the carburettor operation and reduce the chance of fuel leakage in extreme operating conditions.

Full installation instructions are included.

Suitable for both Spanish and Italian made Weber DCOE carburetors.

Cold Start Device Elimination Kit for Weber DCOE carburetors

WC9990266000
Throttle Position Sensor TPS for Weber DCOE 40 and 45 carburetors

Throttle Position Sensor TPS for Weber DCOE 40 and 45 carburetors

Throttle Position Sensor (or TPS), suitable for the Weber DCOE40 and DCOE45 to suit the Alpha Injection System.

The kits for the Weber DCOE, Weber DCO/SP and the Dellorto DHLA are basically the same apart from the carburettor mounting bracket which is specific to each carburettor type.

You can download the fitting instruction (in English) HERE.

Individual parts for these sensors can be found HERE.

This set contains all the parts needed at the "carburetor end".

In order to connect this set to your wiring loom, you need a connector kit which you can order separately or directly along with this set.

Throttle Position Sensor TPS for Weber DCOE 40 and 45 carburetors

WC9990265400
Mounting Bracket for Throttle Position Sensor TPS on Weber DCOE carburetors

Mounting Bracket for Throttle Position Sensor TPS on Weber DCOE carburetors

This is the mounting bracket for the Throttle Position Sensor (or TPS) on the Weber DCOE carburetors.

 

 

Mounting Bracket for Throttle Position Sensor TPS on Weber DCOE carburetors

99902.668
Throttle Position Sensor TPS for Weber DCO/SP 48 carburetors

Throttle Position Sensor TPS for Weber DCO/SP 48 carburetors

Throttle Position Sensor (or TPS), suitable for the Weber DCO / SP 48 to suit the Alpha Injection System.

The kits for the Weber DCOE, Weber DCO/SP and the Dellorto DHLA are basically the same apart from the carburettor mounting bracket which is specific to each carburettor type.

You can download the fitting instruction (in English) HERE.

Individual parts for these sensors can be found HERE.

This set contains all the parts needed at the "carburettor end".

In order to connect this set to your wiring loom, you need a connector kit which you can order separately or directly along with this set.

Throttle Position Sensor TPS for Weber DCO/SP 48 carburetors

40/15
15 mm long bolt-on trumpet for 40mm carburetors

15 mm long bolt-on trumpet for 40mm carburetors

Top quality machined alloy bolt-on trumpet for 40mm diameter carburetors.

These trumpets measure 15 mm in total length.

Diameter at the flared end is some 57mm.

They will fit the following carburetors:

  • Dellorto DHLA40
  • Dellorto DRLA40
  • Weber DCOE40
  • Weber IDF40
  • Solex, SK and DCOW carburetors with a 40mm bore
  • Throttle bodies with 65mm stud centers and 40mm bore

15 mm long bolt-on trumpet for 40mm carburetors

40/25
25 mm long bolt-on trumpet for 40mm carburetors

25 mm long bolt-on trumpet for 40mm carburetors

Top quality machined alloy bolt-on trumpet for 40mm diameter carburetors.

These trumpets measure 25 mm in total length.

Diameter at the flared end is some 57mm.

They will fit the following carburetors:

  • Dellorto DHLA40
  • Dellorto DRLA40
  • Weber DCOE40
  • Weber IDF40
  • Solex, SK and DCOW carburetors with a 40mm bore
  • Throttle bodies with 65mm stud centers and 40mm bore

25 mm long bolt-on trumpet for 40mm carburetors

8257
43 mm long bolt-on trumpet for 40mm carburetors

43 mm long bolt-on trumpet for 40mm carburetors

Top quality machined alloy bolt-on trumpet for 40mm diameter carburetors.

These trumpets measure 43mm in total length.

Diameter at the flared end is some 57mm.

They will fit the following carburetors:

  • Dellorto DHLA40
  • Dellorto DRLA40
  • Weber DCOE40
  • Weber IDF40
  • Solex, SK and DCOW carburetors with a 40mm bore
  • Throttle bodies with 65mm stud centers and 40mm bore

43 mm long bolt-on trumpet for 40mm carburetors

40/50
50 mm long bolt-on trumpet for 40mm carburetors

50 mm long bolt-on trumpet for 40mm carburetors

Newly arrived 50 mm long bolt-on trumpet for 40mm carburetors

Top quality machined alloy bolt-on trumpet for 40mm diameter carburetors.

These trumpets measure 50 mm in total length.

They will fit the following carburetors:

  • Dellorto DHLA40
  • Dellorto DRLA40
  • Weber DCOE40
  • Weber IDF40
  • Solex ADDHE 40
  • SK and DCOW carburetors with a 40mm bore
  • Throttle bodies with 65mm stud centers and 40mm bore

50 mm long bolt-on trumpet for 40mm carburetors

E40/60G
62 mm long bolt-on trumpet with gauze for 40 mm carburetors

62 mm long bolt-on trumpet with gauze for 40 mm carburetors

Top quality machined alloy bolt-on trumpet with coarse gauze, for 40 mm diameter carburetors.

Machined from a solid billet of aluminum.

This trumpet is of the so-called bolt-on type and thus requires two nuts & bolts to be attached to the carburettor.

These trumpets measure 62 mm in length to which some 13 mm has to be added for the domed gauze filter, making a total length of 75 mm.

Diameter at the flared end is some 64 mm.

They will fit the following carburetors:

  • Dellorto DHLA40
  • Dellorto DRLA40
  • Weber DCOE40
  • Weber IDF40
  • Solex ADDHE
  • Solex, SK and DCOW carburetors with a 40 mm bore
  • Throttle bodies with 65 mm stud centers and 40 mm bore

62 mm long bolt-on trumpet with gauze for 40 mm carburetors

PX300DCOE
Pipercross PX300 Airfilter System for Weber DCOE Carburetors

Pipercross PX300 Airfilter System for Weber DCOE Carburetors

This is the Pipercross PX300 air filter system for 1 Weber DCOE carburateur.

Fits the DCOE40, DCOE45 and DCOE48.

An explanation of this ingenious system can be found HERE.

A set consists of a baseplate made to fit the Weber DCOE series and, when desired, a PX300 filter element of your choice.

To make life a little easier for you you can open the tables with sizes in a new window by clicking HERE.

To allow you engine to breath as freely as possible, we advise you to take the largest filter that you can fit under the bonnet.

If you are using ram pipes or trumpets, then please allow at least 19 mm of space between the trumpet mouth and inner face of the filter.

The desired shape and size of the filer can be selected through the dropbox at the top of this page.

Should you desire just the filter element, then please click HERE.

Pricing of these sets is as follows:

 Base plate ONLY  US$ 24.95
 Filterelement ONLY  US$ 64.95
 Total  US$ 89.90


When purchasing a baseplate and element together, we can offer these at US$ 84.95 giving you a savings of US$ 4.95 per set.

Pipercross PX300 Airfilter System for Weber DCOE Carburetors

PX300FILTER
Pipercross PX300 Airfilter Element

Pipercross PX300 Airfilter Element

These are the Pipercross PX300 air filter elements, to be used in combination with the PX300 baseplates.

An explanation of this ingenious system can be found HERE.

The filters are produced from triple-laminated Pipercross filter foam and are supported on the inside by sturdy mesh.

The filters are produced in two basic shapes, the “Dome” and the“Box”.
The differences between the two are best demonstrated in the photos below:

De tegenhanger van de "Bolhoed", de "Doos" vindt u HIER maar de verschillend worden het duidelijkst in onderstaande foto: The filters are produced in two basic shapes, the “Dome” and the“Box”.

The filters always have the same "groundplan" of 190 x 190 mm in order to fit onto the base plates.

The differences are in the shape and in- and external height.

To allow you engine to breath as freely as possible, we advise you to take the highest filter that you can fit under the bonnet.

If you are using rampipes or trumpets, then please allow at least 19 mm of space between the trumpet mouth and inner face of the filter.

The following heights are available for the various models:

Pipercross PX300 Dome Filter
 Dome   External Height   Internal Height 
 C302D 

 65 mm

 40 mm

 C303D 

 90 mm

 65 mm

 C304D 

 125 mm

 100 mm

 

Pipercross PX300 Box Filter
 Box   External Height   Internal Height 
 C3001 

 40 mm

 25 mm

 C3002 

 55 mm

 40 mm

 C3003 

 80 mm

 65 mm

 C3004 

 115 mm

 100 mm


You can choose the required shape and size through the dropbox at the top of this page.

To make life a little easier for you you can open the tables with sizes in a new window by clicking HERE.

Attention!
This is the filter element only.
To be able to use this, you will always require a PX300 base plate, suitable for your carburetor.
The various baseplates that we have available can be found in the PiperCross PX300 department.

Pipercross PX300 Airfilter Element

C1050
C1050 Pipercross Universal Airfilter Socks for Ram Pipes

C1050 Pipercross Universal Airfilter Socks for Ram Pipes

These are the famous Pipercross Ram Pipe Socks which are probably the most universal airfilter solution when working with individual air stacks.

These socks are easily tailored to size by shortening them with a pair of scissors.

The generous inner diameter makes them suitable for virtually all rampipes.

Created out of the famous Pipercross foam, the socks don't require any oiling but are used "dry" and are easily washed out in water with a mild detergent.

This is the "normal" version, very well suited for street and track use. Should you be using your vehicle in extremely dusty circumstances, like auto- and motocross, we recommend the Heavy Duty version, C1050MX.

Dimensions:

  • Internal diameter: 70 mm
  • External diameter: 95 mm
  • Internal height: 100 mm
  • External height: 115 mm

Before putting the socks in place, you cut them to size. Then slide them onto the ram pipes and, when desired, you can secure them in place with a simple plastic tie-strap.

Although Pipercross supplies these only in pairs, we understand the need in the market for "singles" and consequently we sell these individually.

Please note that we show a ram pipe in the photos but that this is NOT included.

C1050 Pipercross Universal Airfilter Socks for Ram Pipes

C1050MX
C1050MX Heavy Duty Pipercross Universal Airfilter Socks for Ram Pipes

C1050MX Heavy Duty Pipercross Universal Airfilter Socks for Ram Pipes

These are the famous Heavy Duty Pipercross Ram Pipe Socks which are probably the most universal airfilter solution when working with individual air stacks.

These socks are easily tailored to size by shortening them with a pair of scissors.

The generous inner diameter makes them suitable for virtually all rampipes.

Created out of not less than 3 layers of the famous, green, Heavy Duty Pipercross foam, the socks don't require any oiling but are used "dry" and are easily washed out in water with a mild detergent.

Being the heavy duty version, these socks are very well suited for use in extremely dusty circumstances like auto- and motocross.

For street and track use, the better option is to pick the normal version, C1050.

Dimensions:

  • Internal diameter: 55 mm
  • External diameter: 95 mm
  • Internal height: 95 mm
  • External height: 120 mm

Before putting the socks in place, you cut them to size. Then slide them onto the ram pipes and, when desired, you can secure them in place with a simple plastic tie-strap.

Although Pipercross supplies these only in pairs, we understand the need in the market for "singles" and consequently we sell these individually.

Please note that we show a ram pipe in the photos but that this is NOT included.

C1050MX Heavy Duty Pipercross Universal Airfilter Socks for Ram Pipes

C1052
C1052 Enclosed Pipercross Universal Airfilter Socks for Ram Pipes

C1052 Enclosed Pipercross Universal Airfilter Socks for Ram Pipes

These are the famous "enclosed" Pipercross Ram Pipe Socks which are probably the most universal airfilter solution when working with individual air stacks.

Contrary to the C1050 "open" socks, this version has a rear panel with opening so that it "hugs" the ram pipe.

The generous inner diameter makes them suitable for virtually all rampipes.

The opening in the rear panel measures some 55 mm in diameter but can of course be stretched significantly thanks to the nature of the foam.

Created out of 3 layers of the the famous Pipercross foam, the socks don't require any oiling but are used "dry" and are easily washed out in water with a mild detergent.

Dimensions:

  • Internal diameter: 80 mm
  • External diameter: 110 mm
  • Internal height: 42.5 mm
  • External height: 70 mm

Simply slide the sock onto the ram pipes and, when desired, you can secure them in place with a plastic tie-strap.

Please note that we show a ram pipe in the photos but that this is NOT included.

C1052 Enclosed Pipercross Universal Airfilter Socks for Ram Pipes

G40