Stromberg 175CD Carburetor Parts
Stromberg 175CD Carburetor Parts

Stromberg 175 CD Parts

Stromberg 175 CD Carburetor Parts and Service Kits.

On this page you will find all currently available parts for the Stromberg 175 CD carburettors.

We are still very much expanding our parts offerings for these carburettors so please contact us by email if the part that you are looking for is not yet listed.

Our Contact Page can be found HERE.

Please note that the 175 CD was also marketed as Pierburg 175 CD and Solex 175 CD.

Stromberg 175CD Carburetor Parts and Service Kits

!
STROMBERGTOOL
Special Tool for Stromberg 175 CD Carburetors

Special Tool for Stromberg 175 CD Carburetors

Special Tool for tuning the Stromberg 175 CD carburetors.

A vital tool for both the DIY mechanic as well as professionals!

 

 

 

 

Special Tool for Stromberg 175 CD Carburetors

PM10784
Replacement Diaphragm for Stromberg 175 CD carburetors

Replacement Diaphragm for Stromberg 175 CD carburetors

Replacement Diaphragm for the Stromberg 175 CD carburetors.

High quality, precision moulded, replacement diaphragm to fit the following variations of the 175 CD:

  • Stromberg 175 CD 2S
  • Stromberg 175 CD 2SE
  • Stromberg 175 CD 2SET
  • Stromberg 175 CD 3
  • Stromberg 175 CD 3-5
  • Stromberg 175 CD S
  • Stromberg 175 CD SE
  • Stromberg 175 CD SEV
  • Stromberg 175 CD SEVX
  • Stromberg 175 CD T
  • Stromberg 175 TCDT

This is a Carburetor City diaphragm of excellent Italian manufacture.

Replacement Diaphragm for Stromberg 175 CD carburetors

PX300175CD
Pipercross PX300 Airfilter System for Stromberg 175 CD Carburetors

Pipercross PX300 Airfilter System for Stromberg 175 CD Carburetors

This is the Pipercross PX300 air filter system for 1 Stromberg 175 CD carburetor.

An explanation of this ingenious system can be found HERE.

A set consists of a baseplate made to fit the Stromberg 175CD series and, when desired, a PX300 filter element of your choice.

To make life a little easier for you you can open the tables with sizes in a new window by clicking HERE.

To allow you engine to breath as freely as possible, we advise you to take the largest filter that you can fit under the bonnet.

If you are using ram pipes or trumpets, then please allow at least 19 mm of space between the trumpet mouth and inner face of the filter.

The desired shape and size of the filer can be selected through the dropbox at the top of this page.

Should you desire just the filter element, then please click HERE.

Pricing of these sets is as follows:

Base plate ONLY US$ 24.95
Filterelement ONLY US$ 64.95
Total US$ 89.90


When purchasing a baseplate and element together, we can offer these at US$ 84.95 giving you a savings of US$ 4.95 per set.

Pipercross PX300 Airfilter System for Stromberg 175 CD Carburetors

HAYNES1575
Haynes Weber Carburetor Manual - Zenith - Stromberg - SU

Haynes Weber Carburetor Manual - Zenith - Stromberg - SU

Written for the do-it-yourselfer and good enough for the professional!

Table of contents:

  • Introduction
  • Chapter 1: Basic carburetion
  • Chapter 2: Carburetor fitting
  • Chapter 3: Maintenance and servicing
  • Chapter 4: Overhaul
  • Chapter 5: Converting to Weber carburetors
  • Chapters 6 -13: Specific Weber carburetors
  • Chapters 14-16: Specific Zenith Stromberg carburetors
  • Chapters 17-21: Specific SU carburetors

It covers the theory, specifications, fault diagnosis, repairs and service adjustments on the following carburettors:

  • Weber DAF
  • Weber DCD
  • Weber DFA
  • Weber DFV
  • Weber DFD
  • Weber DFE
  • Weber DFM
  • Weber DFT
  • Weber DGV
  • Weber DIF
  • Weber IDA
  • Weber IDF
  • Weber IDS
  • Weber IDT
  • Weber DCNF
  • Weber DCOE
  • Weber DFAV
  • Weber DFTA
  • Weber DGAS
  • Weber DGAV
  • Weber IDAP
  • Weber IDTP
  • Zenith Stromberg CD “constant depression” carburetors
  • Zenith Stromberg CD
  • Zenith Stromberg CDS
  • Zenith Stromberg CDS-2
  • Zenith Stromberg CDSE
  • Zenith Stromberg CD-2E
  • Zenith Stromberg CDST
  • Zenith Stromberg CDSET
  • SU type H
  • SU type HD
  • SU type HS
  • SU type HIF (including electronic) carburetors and auxiliary starting devices

Some 352 pages that cover the adjusting, tuning and overhauling of the above mentioned carburetors.

Contains step-by-step instructions and Haynes Hints.

Language: English

Haynes Weber Carburetor Manual - Zenith - Stromberg - SU

PMS208
Rebuild Kit for Stromberg 175 CD carburetors

Rebuild Kit for Stromberg 175 CD carburetors

Service kit for the Stromberg 175 CD carburetor.

This set is suitable for the following variations of the 175 CD:

  • Stromberg 175 CD 2S
  • Stromberg 175 CD 2SE
  • Stromberg 175 CD 2SET
  • Stromberg 175 CD 3
  • Stromberg 175 CD 3-5
  • Stromberg 175 CD S
  • Stromberg 175 CD SE
  • Stromberg 175 CD SEV
  • Stromberg 175 CD SEVX
  • Stromberg 175 CD T

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD carburetors

PMS208
Rebuild Kit for Stromberg 175 CD 3 carburetors for Chrysler Avenger

Rebuild Kit for Stromberg 175 CD 3 carburetors for Chrysler Avenger

Service kit for the Stromberg 175 CD 3 carburetor as fitted to, amongst others, the:

  • 1976 - 1979 Chrysler Avenger 1300 - 1295 cc
  • 1976 - 1979 Chrysler Avenger 1600 - 1598 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 3 carburetors for Chrysler Avenger

PMS208
Rebuild Kit for Stromberg 175 CD 3 carburetors for Chrysler Sunbeam

Rebuild Kit for Stromberg 175 CD 3 carburetors for Chrysler Sunbeam

Service kit for the Stromberg 175 CD 3 carburetor as fitted to, amongst others, the:

  • 1977 - 1979 Chrysler Sunbeam 1300 - 1295 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 3 carburetors for Chrysler Sunbeam

PMS208
Rebuild Kit for Stromberg 175 CD 3-5 carburetors for Hillman Avenger

Rebuild Kit for Stromberg 175 CD 3-5 carburetors for Hillman Avenger

Service kit for the Stromberg 175 CD 3-5 carburetor as fitted to, amongst others, the:

  • 1971 - 1976 Hillman Avenger 1300 GT
  • 1971 - 1976 Hillman Avenger 1600 GT

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 3-5 carburetors for Hillman Avenger

PMS208
Rebuild Kit for Stromberg 175 CDSE carburetors for Jaguar XJ6

Rebuild Kit for Stromberg 175 CDSE carburetors for Jaguar XJ6

Service kit for the Stromberg 175 CDSE carburetor as fitted to, amongst others, the:

  • 1975 Jaguar XJ6 4.2L

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CDSE carburetors for Jaguar XJ6

PMS208
Rebuild Kit for Stromberg 175 CDS carburetors for Land Rover 2.6 Liter

Rebuild Kit for Stromberg 175 CDS carburetors for Land Rover 2.6 Liter

Service kit for the Stromberg 175 CDS carburetor as fitted to, amongst others, the:

  • 1967 - 1980 Landrover 2.6 Litre

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CDS carburetors for Land Rover 2.6 Liter

PMS208
Rebuild Kit for Stromberg 175 CDSE carburetors for Land Rover 2.6 Liter

Rebuild Kit for Stromberg 175 CDSE carburetors for Land Rover 2.6 Liter

Service kit for the Stromberg 175 CDSE carburetor as fitted to, amongst others, the:

  • 1967 - 1980 Landrover 2.6 Litre

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CDSE carburetors for Land Rover 2.6 Liter

PMS208
Rebuild Kit for Stromberg 175 CD carburetors for Land Rover 3.5 Liter V8

Rebuild Kit for Stromberg 175 CD carburetors for Land Rover 3.5 Liter V8

Service kit for the Stromberg 175 CD carburetor as fitted to, amongst others, the:

  • Landrover 3.5 V8 - 1978 and later

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD carburetors for Land Rover 3.5 Liter V8

PMS208
Rebuild Kit for Stromberg 175 CDSE carburetors for Land Rover 3.5 Liter V8

Rebuild Kit for Stromberg 175 CDSE carburetors for Land Rover 3.5 Liter V8

Service kit for the Stromberg 175 CDSE carburetor as fitted to, amongst others, the:

  • Landrover 3.5 V8 - 1978 and later

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CDSE carburetors for Land Rover 3.5 Liter V8

PMS208
Rebuild Kit for Stromberg 175 CD 2SE carburetors for Lotus Elan 1600

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Lotus Elan 1600

Service kit for the Stromberg 175 CD 2SE carburetor as fitted to, amongst others, the:

  • 1970 - 1975 Lotus Elan 1600 - 1588 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Lotus Elan 1600

PMS208
Rebuild Kit for Stromberg 175 CD 2SE carburetors for Lotus Elan 2000

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Lotus Elan 2000

Service kit for the Stromberg 175 CD 2SE carburetor as fitted to, amongst others, the:

  • 1970 - 1975 Lotus Elan 2000 - 1973 cc 

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Lotus Elan 2000

PMS159
Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W115

Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W115

Service kit for the Stromberg 175 CDT carburetor as fitted to, amongst others, the:

  • Mercedes Benz 200 W115

Please note that these varieties of the Stromberg / Solex 175CD were exclusively used by Mercedes-Benz and Volvo.

Referring to the drawing, this set contains the following parts to service 1 carburetor:

  • 1 x Choke Housing Gasket - Number 15
  • 1 x Viton (Rubber) O-Ring for Choke Housing - Number 19
  • 1 x Needle Valve Size 225 (see note below) - Number 39
  • 1 x Aluminum Washer for Needle Valve - Number 40
  • 1 x Throttle Slide Diaphragm - Number 48
  • 1 x Paper Float Chamber Gasket - Number 49
  • 1 x Top Cover Gasket - Number 64
  • 1 x Manifold Gasket - NOT indicated in the Drawing

Please note!
The basis of the carburetor is the Stromberg 175CD as produced in the United Kingdom (England / Great Britain).

This version here, the 175 CDT, was produced in Germany for Volvo and Mercedes-Benz and differs from the British versions.

The, scarcely available, literature remains very vague and also the carburettors themselves do not always indicate the exact type.

The German versions often carry the Pierburg or Deutsche Vergaser GMBH names on the top cover and in some cases also "Made in Germany".

However... also of this variety there are at least two versions to be found...

The set that we offer here is suitable for the versions with the round top cover with gasket without eyelets.
So, as indicated in the drawing below:
Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W115
Another major difference can be found in the needle valves as illustrated below:

Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W115

Basically (!) PM8011 is the needle valve as used in the German versions. This is the valve with the FINE thread, as visible in the photo.

If your carburetor is equipped with needle valve PM8016, with COARSE thread, then we would like to refer your to our department for the regular Stromberg 175CD rebuild kits that you will find HERE.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W115

ECCDT175
Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W123

Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W123

Service kit for the Stromberg 175 TCDT carburetor as fitted to the:

  • Mercedes Benz 200 W123

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 225
  • Aluminum Washer for Needle Valve
  • Various rubber / Viton O-Rings
  • Fiber Washer
  • Choke Pull-Down Diaphragm

Please note that the Stromberg 175 CDT was manufactured in Germany and ONLY used by Mercedes-Benz and Volvo.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W123

ECCDT175
Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W201

Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W201

Service kit for the Stromberg 175 TCDT carburetor as fitted to the:

  • Mercedes Benz 200 W201

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 225
  • Aluminum Washer for Needle Valve
  • Various rubber / Viton O-Rings
  • Fiber Washer
  • Choke Pull-Down Diaphragm

Please note that the Stromberg 175 CDT was manufactured in Germany and ONLY used by Mercedes-Benz and Volvo.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 200 W201

ECCDT175
Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 230/4 W115

Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 230/4 W115

Service kit for the Stromberg 175 TCDT carburetor as fitted to the:

  • Mercedes Benz 230/4 W115

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 225
  • Aluminum Washer for Needle Valve
  • Various rubber / Viton O-Rings
  • Fiber Washer
  • Choke Pull-Down Diaphragm

Please note that the Stromberg 175 CDT was manufactured in Germany and ONLY used by Mercedes-Benz and Volvo.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Rebuild Kit for Stromberg 175 CDT carburetors for Mercedes 230/4 W115

PMS159
Rebuild Kit for Stromberg 175 CDT-V carburetors for Mercedes 220 W115

Rebuild Kit for Stromberg 175 CDT-V carburetors for Mercedes 220 W115

Service kit for the Stromberg 175 CDTV carburetor as fitted to, amongst others, the:

  • Mercedes Benz 220 W115

Please note that these varieties of the Stromberg / Solex 175CD were exclusively used by Mercedes-Benz and Volvo.

Referring to the drawing, this set contains the following parts to service 1 carburetor:

  • 1 x Choke Housing Gasket - Number 15
  • 1 x Viton (Rubber) O-Ring for Choke Housing - Number 19
  • 1 x Needle Valve Size 225 (see note below) - Number 39
  • 1 x Aluminum Washer for Needle Valve - Number 40
  • 1 x Throttle Slide Diaphragm - Number 48
  • 1 x Paper Float Chamber Gasket - Number 49
  • 1 x Top Cover Gasket - Number 64
  • 1 x Manifold Gasket - NOT indicated in the Drawing

Please note!
The basis of the carburetor is the Stromberg 175CD as produced in the United Kingdom (England / Great Britain).

This version here, the 175 CDT-V, was produced in Germany for Volvo and Mercedes-Benz and differs from the British versions.

The, scarcely available, literature remains very vague and also the carburettors themselves do not always indicate the exact type.

The German versions often carry the Pierburg or Deutsche Vergaser GMBH names on the top cover and in some cases also "Made in Germany".

However... also of this variety there are at least two versions to be found...

The set that we offer here is suitable for the versions with the round top cover with gasket without eyelets.
So, as indicated in the drawing below:
Rebuild Kit for Stromberg 175 CDT-V carburetors for Mercedes 220 W115
Another major difference can be found in the needle valves as illustrated below:

Rebuild Kit for Stromberg 175 CDT-V carburetors for Mercedes 220 W115

Basically (!) PM8011 is the needle valve as used in the German versions. This is the valve with the FINE thread, as visible in the photo.

If your carburetor is equipped with needle valve PM8016, with COARSE thread, then we would like to refer your to our department for the regular Stromberg 175CD rebuild kits that you will find HERE.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CDT-V carburetors for Mercedes 220 W115

PMS159
Rebuild Kit for Stromberg 175 CDT-U carburetors for Mercedes 230 W115

Rebuild Kit for Stromberg 175 CDT-U carburetors for Mercedes 230 W115

Service kit for the Stromberg 175 CDTU carburetor as fitted to, amongst others, the:

  • Mercedes Benz 230 W115

Please note that these varieties of the Stromberg / Solex 175CD were exclusively used by Mercedes-Benz and Volvo.

Referring to the drawing, this set contains the following parts to service 1 carburetor:

  • 1 x Choke Housing Gasket - Number 15
  • 1 x Viton (Rubber) O-Ring for Choke Housing - Number 19
  • 1 x Needle Valve Size 225 (see note below) - Number 39
  • 1 x Aluminum Washer for Needle Valve - Number 40
  • 1 x Throttle Slide Diaphragm - Number 48
  • 1 x Paper Float Chamber Gasket - Number 49
  • 1 x Top Cover Gasket - Number 64
  • 1 x Manifold Gasket - NOT indicated in the Drawing

Please note!
The basis of the carburetor is the Stromberg 175CD as produced in the United Kingdom (England / Great Britain).

This version here, the 175 CDTU, was produced in Germany for Volvo and Mercedes-Benz and differs from the British versions.

The, scarcely available, literature remains very vague and also the carburettors themselves do not always indicate the exact type.

The German versions often carry the Pierburg or Deutsche Vergaser GMBH names on the top cover and in some cases also "Made in Germany".

However... also of this variety there are at least two versions to be found...

The set that we offer here is suitable for the versions with the round top cover with gasket without eyelets.
So, as indicated in the drawing below:
Rebuild Kit for Stromberg 175 CDT-U carburetors for Mercedes 230 W115
Another major difference can be found in the needle valves as illustrated below:

Rebuild Kit for Stromberg 175 CDT-U carburetors for Mercedes 230 W115

Basically (!) PM8011 is the needle valve as used in the German versions. This is the valve with the FINE thread, as visible in the photo.

If your carburetor is equipped with needle valve PM8016, with COARSE thread, then we would like to refer your to our department for the regular Stromberg 175CD rebuild kits that you will find HERE.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CDT-U carburetors for Mercedes 230 W115

PMS208
Rebuild Kit for Stromberg 175 CD carburetors for Morgan Plus 4 TR-4

Rebuild Kit for Stromberg 175 CD carburetors for Morgan Plus 4 TR-4

Service kit for the Stromberg 175 CD carburetor as fitted to, amongst others, the:

  • 1961 - 1967 Morgan Plus 4 - 1387 cc - Triumph TR-4 engined

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD carburetors for Morgan Plus 4 TR-4

PMS208
Rebuild Kit for Stromberg 175 CD S carburetors for Range Rover 3.5 Liter V8

Rebuild Kit for Stromberg 175 CD S carburetors for Range Rover 3.5 Liter V8

Service kit for the Stromberg 175 CDS carburetor as fitted to, amongst others, the:

  • 1970 - 1983 Range Rover 3.5 V8

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD S carburetors for Range Rover 3.5 Liter V8

PMS208
Rebuild Kit for Stromberg 175 CD SE carburetors for Range Rover 3.5 Liter V8

Rebuild Kit for Stromberg 175 CD SE carburetors for Range Rover 3.5 Liter V8

Service kit for the Stromberg 175 CDSE carburetor as fitted to, amongst others, the:

  • 1970 - 1983 Range Rover 3.5 V8

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD SE carburetors for Range Rover 3.5 Liter V8

PMS208
Rebuild Kit for Stromberg 175 CD SEV carburetors for Range Rover 3.5 Liter V8

Rebuild Kit for Stromberg 175 CD SEV carburetors for Range Rover 3.5 Liter V8

Service kit for the Stromberg 175 CDSEV carburetor as fitted to, amongst others, the:

  • 1970 - 1983 Range Rover 3.5 V8

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD SEV carburetors for Range Rover 3.5 Liter V8

PMS208
Rebuild Kit for Stromberg 175 CD 2S carburetors for Range Rover 3.5 Liter V8

Rebuild Kit for Stromberg 175 CD 2S carburetors for Range Rover 3.5 Liter V8

Service kit for the Stromberg 175 CD2S carburetor as fitted to, amongst others, the:

  • 1970 - 1983 Range Rover 3.5 V8

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2S carburetors for Range Rover 3.5 Liter V8

PMS208
Rebuild Kit for Stromberg 175 CD 2SE carburetors for Range Rover 3.5 Liter V8

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Range Rover 3.5 Liter V8

Service kit for the Stromberg 175 CD2SE carburetor as fitted to, amongst others, the:

  • 1970 - 1983 Range Rover 3.5 V8

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Range Rover 3.5 Liter V8

PMS208
Rebuild Kit for Stromberg 175 CD 2SET carburetors for Range Rover 3.5 Liter V8

Rebuild Kit for Stromberg 175 CD 2SET carburetors for Range Rover 3.5 Liter V8

Service kit for the Stromberg 175 CD2SET carburetor as fitted to, amongst others, the:

  • 1970 - 1983 Range Rover 3.5 V8

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2SET carburetors for Range Rover 3.5 Liter V8

PMS208
Rebuild Kit for Stromberg 175 CD carburetors for Rover 3500 V8 SD1

Rebuild Kit for Stromberg 175 CD carburetors for Rover 3500 V8 SD1

Service kit for the Stromberg 175 CD carburetor as fitted to, amongst others, the:

  • 1977 - 1981 Rover SD 1 3500 V8

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD carburetors for Rover 3500 V8 SD1

PMS208
Rebuild Kit for Stromberg 175 CD S carburetors for Saab 99 1700

Rebuild Kit for Stromberg 175 CD S carburetors for Saab 99 1700

Service kit for the Stromberg 175 CDS carburetor as fitted to, amongst others, the:

  • 1968 - 1971 Saab 99 1700 - 1709 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD S carburetors for Saab 99 1700

PMS208
Rebuild Kit for Stromberg 175 CD SE carburetors for Saab 99 1700

Rebuild Kit for Stromberg 175 CD SE carburetors for Saab 99 1700

Service kit for the Stromberg 175 CDSE carburetor as fitted to, amongst others, the:

  • 1968 - 1971 Saab 99 1700 - 1709 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD SE carburetors for Saab 99 1700

PMS208
Rebuild Kit for Stromberg 175 CD S carburetors for Saab 99 1900

Rebuild Kit for Stromberg 175 CD S carburetors for Saab 99 1900

Service kit for the Stromberg 175 CDS carburetor as fitted to, amongst others, the:

  • 1968 - 1971 Saab 99 1900 - 1854 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD S carburetors for Saab 99 1900

PMS208
Rebuild Kit for Stromberg 175 CD S carburetors for Saab 99 B20

Rebuild Kit for Stromberg 175 CD S carburetors for Saab 99 B20

Service kit for the Stromberg 175 CDS carburetor as fitted to, amongst others, the:

  • 1972 - 1976 Saab 99 B20 2000 - 1985 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD S carburetors for Saab 99 B20

PMS208
Rebuild Kit for Stromberg 175 CD SEVX carburetors for Saab 99 B20

Rebuild Kit for Stromberg 175 CD SEVX carburetors for Saab 99 B20

Service kit for the Stromberg 175 CDSEVX carburetor as fitted to, amongst others, the:

  • 1972 - 1976 Saab 99 B20 2000 - 1985 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD SEVX carburetors for Saab 99 B20

PMS208
Rebuild Kit for Stromberg 175 CD SEVX carburetors for Saab 900 2000

Rebuild Kit for Stromberg 175 CD SEVX carburetors for Saab 900 2000

Service kit for the Stromberg 175 CDSEVX carburetor as fitted to, amongst others, the:

  • Saab 900 2000 - 1985 cc - 1979 onwards

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD SEVX carburetors for Saab 900 2000

PMS208
Rebuild Kit for Stromberg 175 CD 3 carburetors for Sunbeam 1300

Rebuild Kit for Stromberg 175 CD 3 carburetors for Sunbeam 1300

Service kit for the Stromberg 175 CD3 carburetor as fitted to, amongst others, the:

  • 1979 - 1981 Sunbeam 1300 GLS - 1295 cc
  • 1979 - 1981 Sunbeam 1300 GT - 1295 cc 

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 3 carburetors for Sunbeam 1300

PMS208
Rebuild Kit for Stromberg 175 CD 3 carburetors for Sunbeam GLS

Rebuild Kit for Stromberg 175 CD 3 carburetors for Sunbeam GLS

Service kit for the Stromberg 175 CD3 carburetor as fitted to, amongst others, the:

  • 1979 - 1981 Sunbeam 1600 GLS - 1598 cc  

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 3 carburetors for Sunbeam GLS

PMS208
Rebuild Kit for Stromberg 175 CD 2S carburetors for Triumph Stag V8

Rebuild Kit for Stromberg 175 CD 2S carburetors for Triumph Stag V8

Service kit for the Stromberg 175 CD2S carburetor as fitted to, amongst others, the:

  • 1970 - 1977 Triumph Stag V8 3000 - 2997 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2S carburetors for Triumph Stag V8

PMS208
Rebuild Kit for Stromberg 175 CD SEVX carburetors for Triumph TR-6

Rebuild Kit for Stromberg 175 CD SEVX carburetors for Triumph TR-6

Service kit for the Stromberg 175 CDSEVX carburetor as fitted to, amongst others, the:

  • 1974 - 1975 Triumph TR6 - 2498 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD SEVX carburetors for Triumph TR-6

PMS208
Rebuild Kit for Stromberg 175 CD SET carburetors for Triumph TR-8

Rebuild Kit for Stromberg 175 CD SET carburetors for Triumph TR-8

Service kit for the Stromberg 175 CDSET carburetor as fitted to, amongst others, the:

  • 1976 - 1981 Triumph TR8 V8 3500 - 3525 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD SET carburetors for Triumph TR-8

PMS208
Rebuild Kit for Stromberg 175 CD 2 carburetors for Vauxhall Firenza 2000 SL

Rebuild Kit for Stromberg 175 CD 2 carburetors for Vauxhall Firenza 2000 SL

Service kit for the Stromberg 175 CD2 carburetor as fitted to, amongst others, the:

  • Vauxhall Firenza 2000 SL - 1975 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2 carburetors for Vauxhall Firenza 2000 SL

PMS208
Rebuild Kit for Stromberg 175 CD 2SE carburetors for Vauxhall Firenza 2300 OHC

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Vauxhall Firenza 2300 OHC

Service kit for the Stromberg 175 CD2SE carburetor as fitted to, amongst others, the:

  • Vauxhall Firenza 2300 OHC - 2279 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Vauxhall Firenza 2300 OHC

PMS208
Rebuild Kit for Stromberg 175 CD 2 carburetors for Vauxhall Firenza 2300 SL Sport

Rebuild Kit for Stromberg 175 CD 2 carburetors for Vauxhall Firenza 2300 SL Sport

Service kit for the Stromberg 175 CD2 carburetor as fitted to, amongst others, the:

  • Vauxhall Firenza 2300 SL Sport - 2279 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2 carburetors for Vauxhall Firenza 2300 SL Sport

PMS208
Rebuild Kit for Stromberg 175 CD 2SET carburetors for Vauxhall Magnum 1800 OHC

Rebuild Kit for Stromberg 175 CD 2SET carburetors for Vauxhall Magnum 1800 OHC

Service kit for the Stromberg 175 CD2SET carburetor as fitted to, amongst others, the:

  • 1975 - 1978 Vauxhall Magnum 1800 OHC - 1759 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2SET carburetors for Vauxhall Magnum 1800 OHC

PMS208
Rebuild Kit for Stromberg 175 CD 2SE carburetors for Vauxhall Magnum 2300 OHC

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Vauxhall Magnum 2300 OHC

Service kit for the Stromberg 175 CD2SE carburetor as fitted to, amongst others, the:

  • 1973 - 1975 Vauxhall Magnum 2300 OHC - 2279 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Vauxhall Magnum 2300 OHC

PMS208
Rebuild Kit for Stromberg 175 CD 2SET carburetors for Vauxhall Magnum 2300 OHC

Rebuild Kit for Stromberg 175 CD 2SET carburetors for Vauxhall Magnum 2300 OHC

Service kit for the Stromberg 175 CD2SET carburetor as fitted to, amongst others, the:

  • 1975 - 1978 Vauxhall Magnum 2300 OHC - 2279 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2SET carburetors for Vauxhall Magnum 2300 OHC

PMS208
Rebuild Kit for Stromberg 175 CD 2S carburetors for Vauxhall Victor 2300 FD Series

Rebuild Kit for Stromberg 175 CD 2S carburetors for Vauxhall Victor 2300 FD Series

Service kit for the Stromberg 175 CD2S carburetor as fitted to, amongst others, the:

  • 1969 - 1972 Vauxhall Victor 2300 FD Series - 2279 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2S carburetors for Vauxhall Victor 2300 FD Series

PMS208
Rebuild Kit for Stromberg 175 CD 2SE carburetors for Vauxhall Victor 2300 FE Series

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Vauxhall Victor 2300 FE Series

Service kit for the Stromberg 175 CD2SE carburetor as fitted to, amongst others, the:

  • 1972 - 1976 Vauxhall Victor 2300 FE Series - 2279 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Vauxhall Victor 2300 FE Series

PMS208
Rebuild Kit for Stromberg 175 CD 2SET carburetors for Vauxhall Viva 1800 OHC

Rebuild Kit for Stromberg 175 CD 2SET carburetors for Vauxhall Viva 1800 OHC

Service kit for the Stromberg 175 CD2SET carburetor as fitted to, amongst others, the:

  • 1975 - 1978 Vauxhall Viva 1800 OHC - 1760 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2SET carburetors for Vauxhall Viva 1800 OHC

PMS208
Rebuild Kit for Stromberg 175 CD 2SE carburetors for Vauxhall Viva 2300 OHC

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Vauxhall Viva 2300 OHC

Service kit for the Stromberg 175 CD2SE carburetor as fitted to, amongst others, the:

  • 1972 - 1975 Vauxhall Viva 2300 OHC - 2279 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Vauxhall Viva 2300 OHC

PMS208
Rebuild Kit for Stromberg 175 CD 2SET carburetors for Vauxhall Viva 2300 OHC

Rebuild Kit for Stromberg 175 CD 2SET carburetors for Vauxhall Viva 2300 OHC

Service kit for the Stromberg 175 CD2SET carburetor as fitted to, amongst others, the:

  • 1975 - 1978 Vauxhall Viva 2300 OHC - 2279 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2SET carburetors for Vauxhall Viva 2300 OHC

PMS208
Rebuild Kit for Stromberg 175 CD 2SET carburetors for Vauxhall VX 1800 FE

Rebuild Kit for Stromberg 175 CD 2SET carburetors for Vauxhall VX 1800 FE

Service kit for the Stromberg 175 CD2SET carburetor as fitted to, amongst others, the:

  • 1976 - 1978 Vauxhall VX 1800 FE - 1759 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2SET carburetors for Vauxhall VX 1800 FE

PMS208
Rebuild Kit for Stromberg 175 CD 2S carburetors for Vauxhall VX 4/90 FD

Rebuild Kit for Stromberg 175 CD 2S carburetors for Vauxhall VX 4/90 FD

Service kit for the Stromberg 175 CD2S carburetor as fitted to, amongst others, the:

  • 1969 - 1972 Vauxhall VX 4/90 FD - 1975 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2S carburetors for Vauxhall VX 4/90 FD

PMS208
Rebuild Kit for Stromberg 175 CD 2S carburetors for Vauxhall VX 4/90 FE

Rebuild Kit for Stromberg 175 CD 2S carburetors for Vauxhall VX 4/90 FE

Service kit for the Stromberg 175 CD2S carburetor as fitted to, amongst others, the:

  • 1972 - 1978 Vauxhall VX 4/90 FE - 2279 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2S carburetors for Vauxhall VX 4/90 FE

PMS208
Rebuild Kit for Stromberg 175 CD 2SE carburetors for Vauxhall W 2300 FE

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Vauxhall W 2300 FE

Service kit for the Stromberg 175 CD2SE carburetor as fitted to, amongst others, the:

  • 1972 - 1978 Vauxhall W 2300 FE - 2279 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Vauxhall W 2300 FE

PMS208
Rebuild Kit for Stromberg 175 CD 2S carburetors for Volvo 140 B18

Rebuild Kit for Stromberg 175 CD 2S carburetors for Volvo 140 B18

Service kit for the Stromberg 175 CD2S carburetor as fitted to, amongst others, the:

  • 1966 - 1968 Volvo 140 B18 - 1788 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2S carburetors for Volvo 140 B18

PMS208
Rebuild Kit for Stromberg 175 CD 2SE carburetors for Volvo 140 B20

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Volvo 140 B20

Service kit for the Stromberg 175 CD2SE carburetor as fitted to, amongst others, the:

  • 1968 - 1974 Volvo 140 B20 - 1986 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Volvo 140 B20

PMS208
Rebuild Kit for Stromberg 175 CD 2SE carburetors for Volvo 240 B18

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Volvo 240 B18

Service kit for the Stromberg 175 CD2SE carburetor as fitted to, amongst others, the:

  • 1979 - 1985 Volvo 240 B18

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Volvo 240 B18

PMS208
Rebuild Kit for Stromberg 175 CD 2SE carburetors for Volvo 240 B20

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Volvo 240 B20

Service kit for the Stromberg 175 CD2SE carburetor as fitted to, amongst others, the:

  • 1974 - 1976 Volvo 240 B20 - 1986 cc
  • 1976 - 1984 Volvo 240 B20 - 1986 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Volvo 240 B20

PMS208
Rebuild Kit for Stromberg 175 CD 2SE carburetors for Volvo 240 B21

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Volvo 240 B21

Service kit for the Stromberg 175 CD2SE carburetor as fitted to, amongst others, the:

  • 1974 - 1984 Volvo 240 B21 - 2127 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Volvo 240 B21

CDUS175
Rebuild Kit for Stromberg 175 CDUS carburetors for Volvo 240 2.3 GL

Rebuild Kit for Stromberg 175 CDUS carburetors for Volvo 240 2.3 GL

Service kit for the Stromberg 175 CDUS carburetor as fitted to, amongst others, the:

  • Volvo 240 2.3GL

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Pump Diaphragm
  • Gasket Set
  • Needle Valve assembly; size 225
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CDUS carburetors for Volvo 240 2.3 GL

PMS208
Rebuild Kit for Stromberg 175 CD 2SE carburetors for Volvo 340

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Volvo 340

Service kit for the Stromberg 175 CD2SE carburetor as fitted to, amongst others, the:

  • 1981 - 1983 Volvo 340 - 1986 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Volvo 340

PMS208
Rebuild Kit for Stromberg 175 CD 2SE carburetors for Volvo 360

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Volvo 360

Service kit for the Stromberg 175 CD2SE carburetor as fitted to, amongst others, the:

  • 1981 - 1984 Volvo 360 - 1986 cc

This set contains, amongst others, the following parts to service 1 carburettor:

  • Piston Diaphragm
  • Elaborate Gasket Set
  • Needle Valve assembly; size 175
  • Copper washer
  • Various aluminum washers
  • Various rubber / Viton O-Rings

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City carburetor rebuild kit of excellent Italian manufacture.

Please note that, contrary to many other makes of carburetors, most of the Stromberg 175CD's use fuel line with an inner diameter of 6 mm.
Our product range of 6 mm fuel line and connectors can be found HERE.

Rebuild Kit for Stromberg 175 CD 2SE carburetors for Volvo 360

gatestextiel6mm
Gates textile covered fuel line hose with 6 mm inner diameter

Gates textile covered fuel line hose with 6 mm inner diameter

This is the top-of-the-line Gates flexible fuel line, resistant to modern day, aggressive, fuels.

Textile covered for the correct "vintage" look.

This fuel hose has an 6 mm inner diameter and 11 mm outer diameter.

It is sold in lengths of 0.5 meter.

When ordering multiple lengths, we will do our best to supply it as 1 piece.

This small-diameter hose has a durable and oil resistant textile cover that provides a dependable and safe service on fuel circuits in passenger cars.

This hose is resistant to heat, leaded and unleaded fuels, oil and Diesel.
Please note that E10 fuel resistance is NOT mentioned by the manufacturer!

Recommended for clamped hose applications on fuel systems in passenger cars.

Key Features and Benefits:

• The tube resists heat, fuel (leaded and unleaded petrol, diesel) and oil
• The braided textile cover reinforces the hose and is resistant to heat, ozone and weathering
• Working pressure up to 0.6 MPa (6 kg/cm²)
• Temperature range from -35°C to +100°C

Maximum, single, length: 15 meters.

This hose uses 10 - 12 mm jubilee clips.

Gates textile covered fuel line hose with 6 mm inner diameter

2134.0400
Cohline E10-resistant fuel line hose with 6 mm inner diameter

Cohline E10-resistant fuel line hose with 6 mm inner diameter

This is the top-of-the-line Cohline, E10-resistant, flexible fuel line / hose.

This fuel hose has an 6 mm inner diameter and 12 mm outer diameter and is therewith a nice, tight, fit onto 6 mm fuel unions.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 50 mm

This hose uses 10 - 12 mm jubilee clips.

Cohline E10-resistant fuel line hose with 6 mm inner diameter

2134.01.0400
Cohline E10-resistant fuel line hose with 6 mm inner diameter and steel braiding

Cohline E10-resistant fuel line hose with 6 mm inner diameter and steel braiding

This is the top-of-the-line Cohline, steel-braided E10-resistant, flexible fuel line / hose.

This fuel hose has an 6 mm inner diameter and 13.5 mm outer diameter and is therewith suitable for 6 mm fuel unions.

It is sold in lengths of 1 meter (3 Feet 3 3/8 inch).

When ordering multiple lengths, we will do our best to supply it as 1 piece.

Maximum, single, length: 15 meters.

Black rubber textile reinforced hose for conveying commercial fuels, including Super Grade and E10.
Also suitable for Diesel fuels with Bio–Diesel addition.

Construction:

  • Cover: Black smooth CR
  • Reinforcement: High tensile synthetic textile plies
  • Liner: Black smooth NBR

Temperature:

  • -30°C to + 50°C (Petrol), 65°C (Diesel) / -22°F to + 122°C (Petrol), 149°C (Diesel)

Safety Factor:

  • 3:1 (Burst pressure = 3 x working pressure)

Regular pressures:

  • Regular working pressure: 10 Bars / 145 PSI
  • Tested pressure: 20 Bars / 290 PSI
  • Bursting pressure: 30 Bars / 435 PSI

Minimum bend radius in mm:

  • 50 mm

This hose uses 12 - 14 mm jubilee clips.

Cohline E10-resistant fuel line hose with 6 mm inner diameter and steel braiding

norm5mm
Endless Band Hose Clamp with Buckle - 5 mm wide

Endless Band Hose Clamp with Buckle - 5 mm wide

Endless Band Hose Clamp with Buckle - 5 mm wide.

Again one of those items that allows you to put the finishing touches on a restoration!

This is the famous "endless band hose clamp with buckle" that was used throughout the 1950's, 1960's and 1970's in the car industry.

Unfortunately, these band clamps are only suitable for one-time use and are discarded after removing them.

Over the years, these clamps have become harder and harder to find but we managed to find a source!

We are selling these in sets.

Such a set consist of the following:

  • Approximately 100 cm Zinc-plated band, 5 millimeters wide
  • 3 buckles

This way, you have roughly a foot (or 33 cm) of band per clamp / buckle which is more than enough for regular applications.

Thanks to the generous length of band, there is virtually no limit to the diameter or circumference of the clamp that you wish to apply although these were usually applied to small diameter fuel lines.

Please note that this style of clamping is NOT suitable for steel-braided lines.

Endless Band Hose Clamp with Buckle - 5 mm wide

jubilee10-12
10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

Stainless Steel Jubilee Clip Hose Clamp for 6 mm Flexible Fuel Line.

This hose clamp (or jubilee clip) is perfectly suited for our 6 mm internal diameter fuel line as well as our green "Italian Style" transparent fuel line.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to our textile covered fuel hose.

It is rated for between 10 and 12 mm internal diameter (i.e. 10 - 12 mm external hose/line diameter).

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

10 - 12 mm Stainless Steel Jubilee Clip Hose Clamp

jubilee12-14
12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp

12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp

12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp.

Neatly finished, the stainless steel (Grade 304) makes it the perfect compliment to a well-cared for "under the hood" look.

It is rated for between 12 and 14 mm external diameter flexible hose / line.

Can be tightened using a 7 mm socket or flat head screwdriver.
Excellently suited for use with our Gates Flexi Driver tool.

12 - 14 mm Stainless Steel Jubilee Clip Hose Clamp

flexoid5xa4
Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material.

Almost a "First Aid Kit" for the home mechanic!

This set of first quality gasket paper contains 5 sheets in DIN A4 size (300 x 210 mm or roughly 11.8 x 8.3 inches) in 5 different thicknesses.

You can cut these sheets to almost any desirable size and shape to help you out when the required gasket is not at hand.

The sheets are made of cellulose based, plasticised gelatin-impregnated material.

The sheets are of the following thickness:

  • 0.15 MM
  • 0.25 MM
  • 0.4 MM
  • 0.8 MM
  • 1.6 MM

Set of 5 x A4 Sheets of Flexoid Gasket Paper Material

LBT565
Set of 9 Hollow Punches for Gasket Material 2.5 - 10 mm

Set of 9 Hollow Punches for Gasket Material 2.5 - 10 mm

Set of 9 Hollow Punches for Gasket Material 2.5 - 10 mm.

An excellent addition to our our sets of gasket paper sheets!

This is a set of 9 different sizes, round, hollow punches to make perfectly round holes in you your home-made gaskets.

Simply put the gasket-to-be on a suitable surface, position the punch with care, hit it firmly with a hammer and there you go! A perfectly round hole in your gasket!

This set consists of punches in the following sizes:

  • 1 x 2.5 mm
  • 1 x 3 mm
  • 1 x 4 mm
  • 1 x 5 mm
  • 1 x 6 mm
  • 1 x 7 mm
  • 1 x 8 mm
  • 1 x 9 mm
  • 1 x 10 mm

Set of 9 Hollow Punches for Gasket Material 2.5 - 10 mm

OWV
Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve

Sytec Fuel Line One Way Valve.

We have two versions available:

  • Suitable for 6 mm internal diameter fuel hoses
  • Suitable for 8 mm internal diameter fuel hoses

Silver anodized finish.

Prevents fuel from leaking back into the fuel tank.

Suitable for regular fuel, E10, E85 and Diesel.

Viton seals.

We strongly advise you to secure your fuel lines using our stainless steel jubilee clips, despite the barbed edge on these unions.
For your convenience, you can order these clips right along with the union by simply selecting it through the drop-box above.

Sytec Fuel Line One Way Valve

jet sizer
Carburettor Jet Gauges

Carburettor Jet Gauges

Calibrated gauges to measure jet sizes.

The perfect way to determine the exact size of jets, regardless of what is indicated on them.

Sometimes jets are drilled out to requirement and / or the original indicators are removed or illegible which leaves you questioning the true size.

With these gauges, you can still determine which size these jets are.

Indispensable when working on modified carburettors!

Two different sets available:

Set 1: 20 gauges, ranging from 0,45 mm to 1,50 mm
Set 2: 16 gauges, ranging from 1,50 to 3,00 mm

Priced per set!

Carburettor Jet Gauges

JSG01
Jet size gauge 0.5 to 1.5 mm

Jet size gauge 0.5 to 1.5 mm

Jet sizing tool to measure jets between 0.5 and 1.5 mm internal diameter.

Measurements are taken by inserting the tapered needle into the jet.

The size can then directly be read from the scale.

 

 

Jet size gauge 0.5 to 1.5 mm

JDK01
54-Piece Jet Drill Set

54-Piece Jet Drill Set

Jet drill set comprising 50 jet drills and and 4 pin vises.

The perfect way to fine-tune any jet to suit your needs.

Also highly suited to clean clogged-up jets.

The set contains:

  • 4 pin vises to suit all drill sizes included
  • 10 drills ranging from 1,0 to 2,0 mm:
    1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.7, 1.8, 1.9 & 2.0 mm
  • 20 drills ranging is size from 0.3 mm to 1.6 mm:
    0.3, 0.35, 0.4, 0.45, 0.50, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 & 1.6 mm
  • 20 x drills Gauge Number 80 to 61 (0.343 to 0.991 mm / 0.0135 to 0.0390 inches )

54-Piece Jet Drill Set

JET REAMER
16-Piece Jet Reamer Set

16-Piece Jet Reamer Set

Jet reamer kit comprising 16 reamers and and a pin vise.

The perfect way to fine-tune any jet to suit your needs.

The set contains:

  • 1 pin vise to suit all reamer sizes in this set
  • 1 storage case
  • 16 reamers ranging is size from 0.33 mm to 2.00 mm:
    0.33; 0.40; 0.45; 0.50; 0.60; 0.70; 0.75; 0.80; 0.90; 1.00; 1.10; 1.20; 1.40; 1.60; 1.80; 2.00 mm

16-Piece Jet Reamer Set

G4074
Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit

Gunson Colortune See Through Spark Plug Kit.

The Tune-up plug for Petrol or LPG, 2 and 4 stroke engines with single, twin or multiple carburettors or fuel injection systems.

The original and best tool for seeing what's happening inside the combustion chamber of the petrol engine.

It allows you to see the combustion and to adjust the mixture by color.

Fits most petrol engines in standard form with additional adapters available for vehicles with alternative sized spark plugs.

Kit includes:

  • See-Through Spark Plug
  • Hexagonal adapter for spark plug wrench
  • Copper sealing washer
  • Extension Cord
  • Extension tube with mirror
  • Cleaning brush
  • Instructions in English

Colortune will fit most vehicles.

Extra adapter sizes available separately

Available in the following basic thread sizes:

  • 10 mm
  • 12 mm
  • 14 mm

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Colortune See Through Spark Plug Kit

G4053
Gunson Carbalancer Carburetor Synchronizing Tool - G4053

Gunson Carbalancer Carburetor Synchronizing Tool - G4053

Gunson Car Balancer.

Internal combustion engines use a mixture of air and petrol to generate their power.

The performance therefore is influenced by the air flowing into it and the petrol that is metered out by the carburettor.

Unless the air flow in Twin or Multiple carburettors is correctly set, the correct mixture adjustment is unlikely to be achieved and this is the simplest tool to achieve that.

Suitable for use on SU, Solex, Auto-Lite (Fomoco), Stromberg, Weber and Zenith and can be adjusted to fit most carburettors including sidedraft, downdraft with air intakes (Venturi) from 25 mm to 67 mm (1”-2”) diameter

  • Easy read scale indicates the air flow and allows adjustment to optimum efficiency
  • Provides smoother and better acceleration
  • Carbalancer can be adjusted to fit most carburettors
  • Easy to follow instructions

The user manual for the Gunson Carbalancer, in English, can be downloaded HERE.

Available from our stock, ready to be shipped.

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Carbalancer Carburetor Synchronizing Tool - G4053

MANOMETER2
2 Column Manometer - Synchrometer Carbtune Pro

2 Column Manometer - Synchrometer Carbtune Pro

2 Column Manometer

The New Carbtune Pro - essential for balancing multiple carburettors.

  • Superior resolution to dial type gauges
  • Easily read scale
  • Comes complete with 2 x 5mm and 2 x 6mm ultra high temperature glass filled engineering nylon adapters and rubber hoses.
  • Adapters will suit DHLA & DCOE carburettors and many motorcycle carburettors.
  • Stainless steel columns indicate vacuum
  • No calibration or set-up required
  • High impact plastic casing and scale tubes - no glass
  • Dampers supplied to reduce fluctuations
  • Full instructions

Also suitable for car- and motorcycle engines which have the possibility of hooking up vacuum lines.

Replacement line can be found HERE.
Replacement, brass, vacuum take-off can be found HERE.

2 Column Manometer - Synchrometer Carbtune Pro

MANOMETER4
4 Column Manometer - Synchrometer Carbtune Pro

4 Column Manometer - Synchrometer Carbtune Pro

4 Column Manometer / Synchronometer.

This is the New Carbtune Pro, the essential tool for balancing multiple carburettors.

  • The column type scales give a superior resolution compared to dial type gauges
  • Comes complete with 4 x 5 mm and 4 x 6 mm brass adapters and 4 silicone rubber hoses.
  • The supplied adapters will suit the Dellorto DHLA and Weber DCOE carburetors and many motorcycle carburettors.
  • The stainless steel columns indicate the vacuum that each cylinder draws
  • There is no calibration or set-up required
  • Made out of a high-impact plastic casing and scale tubes - not glass to prevent breakage
  • The built-in dampers reduce fluctuations
  • Supplied with full instructions

Also suitable for car- and motorcycle engines which have the possibility of hooking up vacuum lines.

Replacement line can be found HERE.
Replacement, brass, vacuum take-off adapters can be found HERE.

4 Column Manometer - Synchrometer Carbtune Pro

9679
Brass vacuum take-off adapter for carburetors and manifolds

Brass vacuum take-off adapter for carburetors and manifolds

Vacuum take-off adapter for Dellorto DHLA and PHF.

Vacuum take off adapter, will fit standard take off point of DHLA carburetors, DHLB carburettors, and PHF carburettors.

Also fits the Weber DCOE series carburettors and Solex ADDHE.

Brass vacuum take-off adapter for carburetors and manifolds

SYNCHRONOMETER
Synchrometer airflow meter for carburetors

Synchrometer airflow meter for carburetors

Synchrometer airflow meter for various carburetors.

Pushes into the trumpet / ram pipe / velocity stack or throat to measure the airflow to enable you to balance multiple carburettors.

  • Instructions included
  • The original genuine high quality German made product
  • Can be used for all Weber DCOE and IDF and Dellorto DHLA, DRLA carbs with round intakes or trumpets
  • Can also be used with motorcycle carburetors with round intakes

Total length of unit 121mm

Rubber cone dimensions:
Small end diameter 40mm
Large end diameter 55mm
Length of cone 36mm

Synchrometer airflow meter for carburetors

4GAUGESYNCHRO
4 Gauge Carburetor Synchronizing Balancing Tool

4 Gauge Carburetor Synchronizing Balancing Tool

Carburetor Vacuum Synchronizer Set.

4 gauge tool kit, mounted on a solid metal frame for easy reading.

The vacuum gauges range from 0 to -1 bar.

This measurement tool was designed to check and adjust motorcycles and cars with 2, 3 or 4 carburetors.

Each of the gauges is equipped with a damper to obtain stable readings.

The gauges allow to measure the vacuum in each of the gas tubes so you can make direct adjustments to obtain a smooth running engine.

The set comes with all necessary parts like:

  • 4 92 mm gauges fixed on a metal frame
  • 4 rubber hoses 8 x 5 x 750 mm
  • 4 hose clamps
  • 4 adapters M6 x 0.75 - length 53 mm
  • 4 adapters M6 x 1.00 - length 60 mm
  • 4 adapters M5 x 0.75 - length 98 mm
  • 4 adapters M6 x 0.75 - length 170 mm
  • 1 extension 6 x 55 mm
  • Red, blow-molded carry case

Fits the Dellorto DHLA, Dellorto DHLB, Dellorto DRLA, Dellorto PHF, Weber DCOE, Weber DCOM Solex ADDHE and many many more. Please check the list of adapters to see if they fit your particular carburetors.

4 Gauge Carburetor Synchronizing Balancing Tool

LOCTITE542-10ML
10 ml Loctite 542 Thread Sealant

10 ml Loctite 542 Thread Sealant

LOCTITE 542

Thread Sealant - medium strength.
For fine threads in hydraulic, pneumatic and general fittings.
Fast curing.

LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies.
The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration.
The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.

Your Benefits:

  • Ideal for fine threads as used in hydraulic, pneumatic & general fittings
  • Suitable for metal threads only
  • Instant low-pressure seal
  • Resistant to fuel, oil, coolants and hydraulic fluids
  • Locks connection against vibration loosening
  • DVGW approval (EN 751-1): NG-5146AR0855

Excellently suited for sealing connections on carburetors and fuel pumps!

10 ml Loctite 542 Thread Sealant

LOCTITE243-5ML
5 ml Loctite 243 Thread Locker

5 ml Loctite 243 Thread Locker

LOCTITE 243

Threadlocking Adhesive - medium strength.

General purpose.

Suitable for all metal threaded assemblies.

LOCTITE 243 is a general purpose threadlocker of medium bond strength.
This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration.
The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces.
It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

Your Benefits 

  • Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
  • Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)
  • Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids
  • Permits disassembly with hand tools for servicing P1 NSF Reg. No.: 123000

5 ml Loctite 243 Thread Locker

G4125
Gunson Digital Exhaust Gas and CO Tester - G4125

Gunson Digital Exhaust Gas and CO Tester - G4125

The Gunson Digital Exhaust Gas and CO Tester is the perfect (and affordable !) tool for the DIY mechanic to measure and adjust the CO-percentage in the exhaust gases of cars, motorcycles, boats etc equipped with a petrol-driven internal combustion engines.

Allows you to measure the current CO-percentage after which you can adjust it to the required level.

This system is equipped with a pulse pump and is suitable for both leaded and unleaded petrol / gasoline.

The tester will calibrate itself in the open air, has no moving parts to reduce wear and tear and has no filters.

Measures the CO % to 0,5 % accurately throughout the range.

Power: 12 Volt car- or motorcycle battery.

The set comprises the following:

  • The Gastester with box
  • Puls pump with water trap
  • Metal exhaust probe
  • 3 Flexibel pipes
  • Operating Manual in English

If you require the owner's manual again, you can download it HERE.

Additional instructions on adjusting the Gastester, in English, can be downloaded HERE.

This is a short instruction video, again in English:

Available from our stock, ready to be shipped.

For our complete offerings on Gunson Tools, please visit www.GunsonShop.com.

Gunson Digital Exhaust Gas and CO Tester - G4125