Solex Carburetor Service Kits
Solex Carburetor Service Kits

Solex Carburetor Service Kits

Solex Carburetor Service Kits.

Please note that Solex carburetors were also sold under the Pierburg brand but that small differences between the two do exist.

Our Pierburg range of service kits can be found HERE.

The Mikuni variations of Solex carburetors can be found HERE.

Solex Carburetor Service Kits

!
ADDHE
Service Kit for 2 x Solex 40 ADDHE carburetors

Service Kit for 2 x Solex 40 ADDHE carburetors

Service kit for the Solex ADDHE 40 carburetor.

Contains the parts to service 2 carburettors.

Consists of the following parts:

  • Various gaskets
  • 2 Pump Diaphragms
  • 2 Needle Valves
  • 4 carburetor-to-inlet-manifold gaskets
  • Various rubber o-rings
  • Various aluminum washers

This is a Carburetor City carburettor service set, Made in Italy to the highest standards.

Service Kit for 2 Solex 40 ADDHE carburetors

PMS189
Rebuild Kit for 2 x Solex 45 ADDHE carburetors

Rebuild Kit for 2 x Solex 45 ADDHE carburetors

Service kit for the quite rare Solex ADDHE 45 milimeter carburetors.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 2 carburettors.

Consists of the following parts:

  • All required gaskets
  • 2 Pump Diaphragms
  • 2 Needle Valves size 160
  • 4 Inlet Plenum Gaskets
  • All required rubber o-rings and copper, aluminum and fiber washers

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for 2 x Solex 45 ADDHE carburetors

PMS189
Rebuild Kit for 2 Solex 45 ADDHE carburetors for BMW Neue Klasse and 2002

Rebuild Kit for 2 x Solex 45 ADDHE carburetors for BMW Neue Klasse and 2002

Service kit for the quite rare Solex ADDHE 45 milimeter carburetors.

These carburetors can be found, amongst others, on the following cars:

  • BMW 1800 TISA (Neue Klasse)
  • BMW 2000 TI (Neue Klasse)
  • BMW 2002 TI

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 2 carburettors.

Consists of the following parts:

  • All required gaskets
  • 2 Pump Diaphragms
  • 2 Needle Valves size 160
  • 4 Inlet Plenum Gaskets
  • All required rubber o-rings and copper, aluminum and fiber washers

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for 2 Solex 45 ADDHE carburetors for BMW Neue Klasse and 2002

PMS189
Rebuild Kit for 2 Solex 45 ADDHE carburetors for Volvo B-Series

Rebuild Kit for 2 x Solex 45 ADDHE carburetors for Volvo B-Series

Service kit for the quite rare Solex ADDHE 45 milimeter carburetors.

These carburetors can be found, amongst others, on the following cars:

  • Volvo B18
  • Volvo B20
  • Volvo B23 Sport
  • Volvo B30

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 2 carburettors.

Consists of the following parts:

  • All required gaskets
  • 2 Pump Diaphragms
  • 2 Needle Valves size 160
  • 4 Inlet Plenum Gaskets
  • All required rubber o-rings and copper, aluminum and fiber washers

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for 2 Solex 45 ADDHE carburetors for Volvo B-Series

SOLEXB26
Service Kit for Solex B26 ZIC 2 carburetors for Ford Anglia 100E

Service Kit for Solex B26 ZIC 2 carburetors for Ford Anglia 100E

Service Kit for the Solex B26 ZIC 2 carburetors as used on, amongst others, the Ford Anglia with 100E engine.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars, and even marine engines (!), so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Gaskets
  • Washers
  • Complete Needle Valve Assembly

Please note that this concerns a so-called New-Old-Stock set with original needle valve and that these sets are getting VERY thin on the ground as there is NO current production.

Service Kit for Solex B26 ZIC 2 carburetors for Ford Anglia 100E

SKT14
Service Kit for Solex B32 PBI 6 carburetors for Bristol Engines

Service Kit for Solex B32 PBI 6 carburetors for Bristol Engines

This is a factory-original service kit for the Solex / Zenith B32 PBI 6 carburetor as used on the Bristol D-series engines.

These engines were used, amongst others, in the following cars:

  • AC Ace Bristol
  • AC Greyhound Bristol

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Contains the parts to service 1 carburettor.

Consists of the following parts:

  • All required gaskets
  • Pump diaphragm
  • Needle Valve
  • All required washers

Service Kit for Solex B32 PBI 6 carburetors for Bristol Engines

Solex
PMS185
Rebuild Kit for Solex 32 BCISA 5 carburetors for Peugeot J7 B, C, E & F

Rebuild Kit for Solex 32 BCISA 5 carburetors for Peugeot J7 B, C, E & F

Service kit for the Solex 32 BCISA 5 carburetors as used on, amongst others, the:

  • 1968 - 1970 Peugeot J7-B XB5-P - 1618 cc
  • 1968 - 1970 Peugeot J7-C XC5-P - 1618 cc
  • 1970 - 1980 Peugeot J7-E XC7-P - 1618 cc
  • 1970 - 1980 Peugeot J7-F XM7-P - 1796 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Manifold Gasket
  • Pump Diaphragm
  • Flexible Pump Gasket
  • Needle Valve assembly; size 1.7
  • An assortment of Copper Washers
  • An assortment of Fiber Washers

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex 32 BCISA 5 carburetors for Peugeot J7 B, C, E & F

PMS185
Rebuild Kit for Solex 32 BCISA 5 carburetors for Peugeot J9

Rebuild Kit for Solex 32 BCISA 5 carburetors for Peugeot J9

Service kit for the Solex 32 BCISA 5 carburetors as used on, amongst others, the:

  • 1980 - 1983 Peugeot J9 XC7-P - 1618 cc
  • 1980 - 1983 Peugeot J9 XN1-P - 1971 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.
Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Manifold Gasket
  • Pump Diaphragm
  • Flexible Pump Gasket
  • Needle Valve assembly; size 1.7
  • An assortment of Copper Washers
  • An assortment of Fiber Washers

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex 32 BCISA 5 carburetors for Peugeot J9

PMS102
Service Kit for 2 x Solex 40 DDH carburetors

Service Kit for 2 x Solex 40 DDH carburetors

Service kit for the Solex 40 DDH 3, 5, 7 & 8 carburetors.

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 2 carburettors.

Consists of the following parts:

  • All required gaskets
  • 2 Pump Diaphragms
  • 2 Needle Valves Size 1.6
  • 4 Inlet Plenum Gaskets
  • All required rubber o-rings
  • All required fiber washers
  • All required aluminum washers

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for 2 x Solex 40 DDH carburetors

PMS102
Service Kit for 2 x Solex 40 DDH 3 carburetors for Alfa Romeo Giulia 1600 Super

Service Kit for 2 x Solex 40 DDH 3 carburetors for Alfa Romeo Giulia 1600 Super

Service kit for the Solex 40 DDH 3 carburetors as used on, amongst others, the Alfa Romeo Giulia 1600 Super.

Although these carburetors were originally specified for the above cars, they could have been transplanted onto other cars and engines so the range of vehicles that these service sets might fit is much broader.

Alternatively, it is very well possible that your car is no longer be equipped with the carburetor that it left the factory with.

So, we advise you to check carefully if the parts in the picture will fit your carburetor.

In some extreme cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains the parts to service 2 carburettors.

Consists of the following parts:

  • Various gaskets
  • 2 Pump Diaphragms
  • 2 Needle Valves Size 1.6
  • 4 Inlet Plenum Gaskets
  • Various rubber o-rings
  • Various fiber washers
  • Various aluminum washers

This is a Carburetor City carburettor service set, Made in Italy to the highest standards.

Service Kit for 2 x Solex 40 DDH 3 carburetors for Alfa Romeo Giulia 1600 Super

PMS102
Service Kit for 2 x Solex 40 DDH 5-7-8 carburetors for Alfa Romeo 105 Series 1750 and 2000

Service Kit for 2 x Solex 40 DDH 5-7-8 carburetors for Alfa Romeo 105 Series 1750 and 2000

Service kit for the Solex 40 DDH carburetors, versions 5, 7 and 8, as used on, amongst others, the Alfa Romeo 105 Series Berlina and GTV 1750 and 2000.

Although these carburetors were originally specified for the above cars, they could have been transplanted onto other cars and engines so the range of vehicles that these service sets might fit is much broader.

Alternatively, it is very well possible that your car is no longer be equipped with the carburetor that it left the factory with.

So, we advise you to check carefully if the parts in the picture will fit your carburetor.

In some extreme cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains the parts to service 2 carburettors.

Consists of the following parts:

  • Various gaskets
  • 2 Pump Diaphragms
  • 2 Needle Valves Size 1.6
  • 4 Inlet Plenum Gaskets
  • Various rubber o-rings
  • Various fiber washers
  • Various aluminum washers

This is a Carburetor City carburettor service set, Made in Italy to the highest standards.

Service Kit for 2 x Solex 40 DDH 5-7-8 carburetors for Alfa Romeo 105 Series 1750 and 2000

PMS102
Service Kit for 2 x Solex 40 DDH 5 carburetors for Alfa Romeo Alfetta 1600 GT

Service Kit for 2 x Solex 40 DDH 5 carburetors for Alfa Romeo Alfetta 1600 GT

Service kit for the Solex 40 DDH 5 carburetors as used on, amongst others, the Alfa Romeo Alfetta 1600 GT.

Although these carburetors were originally specified for the above cars, they could have been transplanted onto other cars and engines so the range of vehicles that these service sets might fit is much broader.

Alternatively, it is very well possible that your car is no longer be equipped with the carburetor that it left the factory with.

So, we advise you to check carefully if the parts in the picture will fit your carburetor.

In some extreme cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains the parts to service 2 carburettors.

Consists of the following parts:

  • Various gaskets
  • 2 Pump Diaphragms
  • 2 Needle Valves Size 1.6
  • 4 Inlet Plenum Gaskets
  • Various rubber o-rings
  • Various fiber washers
  • Various aluminum washers

This is a Carburetor City carburettor service set, Made in Italy to the highest standards.

Service Kit for 2 x Solex 40 DDH 5 carburetors for Alfa Romeo Alfetta 1600 GT

PMS102
Service Kit for 2 x Solex 40 DDH 7 carburetors for Alfa Romeo Alfetta 1800 GT

Service Kit for 2 x Solex 40 DDH 7 carburetors for Alfa Romeo Alfetta 1800 GT

Service kit for the Solex 40 DDH 7 carburetors as used on, amongst others, the Alfa Romeo Alfetta 1800 GT.

Although these carburetors were originally specified for the above cars, they could have been transplanted onto other cars and engines so the range of vehicles that these service sets might fit is much broader.

Alternatively, it is very well possible that your car is no longer be equipped with the carburetor that it left the factory with.

So, we advise you to check carefully if the parts in the picture will fit your carburetor.

In some extreme cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains the parts to service 2 carburettors.

Consists of the following parts:

  • Various gaskets
  • 2 Pump Diaphragms
  • 2 Needle Valves Size 1.6
  • 4 Inlet Plenum Gaskets
  • Various rubber o-rings
  • Various fiber washers
  • Various aluminum washers

This is a Carburetor City carburettor service set, Made in Italy to the highest standards.

Service Kit for 2 x Solex 40 DDH 7 carburetors for Alfa Romeo Alfetta 1800 GT

PMS102
Service Kit for 2 x Solex 40 DDH 8 carburetors for Alfa Romeo Alfetta 2000 GTV

Service Kit for 2 x Solex 40 DDH 8 carburetors for Alfa Romeo Alfetta 2000 GTV

Service kit for the Solex 40 DDH 8 carburetors as used on, amongst others, the Alfa Romeo Alfetta 2000 GTV.

Although these carburetors were originally specified for the above cars, they could have been transplanted onto other cars and engines so the range of vehicles that these service sets might fit is much broader.

Alternatively, it is very well possible that your car is no longer be equipped with the carburetor that it left the factory with.

So, we advise you to check carefully if the parts in the picture will fit your carburetor.

In some extreme cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains the parts to service 2 carburettors.

Consists of the following parts:

  • Various gaskets
  • 2 Pump Diaphragms
  • 2 Needle Valves Size 1.6
  • 4 Inlet Plenum Gaskets
  • Various rubber o-rings
  • Various fiber washers
  • Various aluminum washers

This is a Carburetor City carburettor service set, Made in Italy to the highest standards.

Service Kit for 2 x Solex 40 DDH 8 carburetors for Alfa Romeo Alfetta 2000 GTV

CCR6436
Service Kit for the Solex 42 DDHF carburetors

Service Kit for the Solex 42 DDHF carburetors

Service kit for the Solex 42 DDHF carburetors.

This rebuild kit contains, amongst others, the following parts to service 1 carburettor, as depicted in the photograph:

  • Elaborate gasket kit
  • Pump diaphragm
  • Needle valves
  • Various washers and o-rings
  • Throttle return spring
  • 2 Throttle valves
  • 4 Brass throttle valve screws

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for the Solex 42 DDHF carburetors

CCR6436
Service Kit for 1 x Solex 42 DDHF carburetors for Lancia Fulvia

Service Kit for 1 x Solex 42 DDHF carburetors for Lancia Fulvia

Service kit for the Solex 42 DDHF carburetors as used on the Lancia Fulvia.

This rebuild kit contains, amongst others, the following parts to service 1 carburettor, as depicted in the photograph:

  • Elaborate gasket kit
  • Pump diaphragm
  • Needle valves
  • Various washers and o-rings
  • Throttle return spring
  • 2 Throttle valves
  • 4 Brass throttle valve screws

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for 1 x Solex 42 DDHF carburetors for Lancia Fulvia

CCR0883
Service Kit for the Solex 40 DDHT carburetors

Service Kit for the Solex 40 DDHT carburetors

Service kit for the Solex 40 DDFT carburetors as.

This rebuild kit contains, amongst others, the following parts to service 1 carburettor, as depicted in the photograph:

  • Elaborate gasket kit
  • Pump diaphragm
  • Needle valve
  • Various washers and o-rings
  • Throttle return spring
  • Throttle Shaft Bushings
  • 2 Throttle valves
  • 4 Throttle valve screws

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for the Solex 40 DDHT carburetors

CCR0883
Service Kit for the Solex 40 DDHT carburetors for Volkwagen K70

Service Kit for the Solex 40 DDHT carburetors for Volkwagen K70

Service kit for the Solex 40 DDFT carburetors as used on the Volkswagen K70.

This rebuild kit contains, amongst others, the following parts to service 1 carburettor, as depicted in the photograph:

  • Elaborate gasket kit
  • Pump diaphragm
  • Needle valve
  • Various washers and o-rings
  • Throttle return spring
  • Throttle Shaft Bushings
  • 2 Throttle valves
  • 4 Throttle valve screws

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for the Solex 40 DDHT carburetors for Volkwagen K70

PMS178
Service Kit for Solex Pierburg 32 DIDTA carburetors

Service Kit for Solex Pierburg 32 DIDTA carburetors

Service kit for the Solex and Pierburg DIDTA 32 series carburetors.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Power Valve Diaphragm
  • Complete needle valve, size 200
  • Float chamber gasket
  • Base gaskets
  • Choke gaskets
  • Various copper washers
  • Various aluminum washers
  • Various rubber / Viton o-rings

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32 DIDTA carburetors

PMS178
Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel A Ascona 1600 S

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel A Ascona 1600 S

Service kit for the Solex and Pierburg DIDTA 32 series carburetors as used on, amongst others, the:

  • 1970 - 1975 Opel Ascona A 1600 S - 1584 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Power Valve Diaphragm
  • Complete needle valve, size 200
  • Float chamber gasket
  • Base gaskets
  • Choke gaskets
  • Various copper washers
  • Various aluminum washers
  • Various rubber / Viton washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex Pierburg 32 DIDTA carburetors for Opel A Ascona 1600 S

PMS178
Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel B Ascona 1600 S

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel B Ascona 1600 S

Service kit for the Solex and Pierburg DIDTA 32 series carburetors as used on, amongst others, the:

  • 1975 - 1981 Opel Ascona B 1600 S - 1584 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Power Valve Diaphragm
  • Complete needle valve, size 200
  • Float chamber gasket
  • Base gaskets
  • Choke gaskets
  • Various copper washers
  • Various aluminum washers
  • Various rubber / Viton washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel B Ascona 1600 S

PMS178
Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel GT 1900

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel GT 1900

Service kit for the Solex and Pierburg DIDTA 32 series carburetors as used on, amongst others, the:

  • Opel GT 1900 - 1897 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Power Valve Diaphragm
  • Complete needle valve, size 200
  • Float chamber gasket
  • Base gaskets
  • Choke gaskets
  • Various copper washers
  • Various aluminum washers
  • Various rubber / Viton washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel GT 1900

PMS178
Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel A Manta 1600 S

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel A Manta 1600 S

Service kit for the Solex and Pierburg DIDTA 32 series carburetors as used on, amongst others, the:

  • 1970 - 1975 Opel Manta A 1600 S - 1584 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Power Valve Diaphragm
  • Complete needle valve, size 200
  • Float chamber gasket
  • Base gaskets
  • Choke gaskets
  • Various copper washers
  • Various aluminum washers
  • Various rubber / Viton washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel A Manta 1600 S

PMS178
Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel B Manta 1600 S

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel B Manta 1600 S

Service kit for the Solex and Pierburg DIDTA 32 series carburetors as used on, amongst others, the:

  • 1975 - 1981 Opel Manta B 1600 S - 1584 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Power Valve Diaphragm
  • Complete needle valve, size 200
  • Float chamber gasket
  • Base gaskets
  • Choke gaskets
  • Various copper washers
  • Various aluminum washers
  • Various rubber / Viton washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel B Manta 1600 S

PMS178
Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel B Rekord 1900 L & S

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel B Rekord 1900 L & S

Service kit for the Solex and Pierburg DIDTA 32 series carburetors as used on, amongst others, the:

  • Opel Rekord B 1900 S - 1897 cc
  • Opel Rekord B 1900 L - 1897 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Power Valve Diaphragm
  • Complete needle valve, size 200
  • Float chamber gasket
  • Base gaskets
  • Choke gaskets
  • Various copper washers
  • Various aluminum washers
  • Various rubber / Viton washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel B Rekord 1900 L & S

PMS178
Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel C Rekord 1900 L & S

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel C Rekord 1900 L & S

Service kit for the Solex and Pierburg DIDTA 32 series carburetors as used on, amongst others, the:

  • Opel Rekord C 1900 S - 1897 cc
  • Opel Rekord C 1900 L - 1897 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Power Valve Diaphragm
  • Complete needle valve, size 200
  • Float chamber gasket
  • Base gaskets
  • Choke gaskets
  • Various copper washers
  • Various aluminum washers
  • Various rubber / Viton washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel C Rekord 1900 L & S

PMS178
Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel C Rekord 2200

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel C Rekord 2200

Service kit for the Solex and Pierburg DIDTA 32 series carburetors as used on, amongst others, the:

  • Opel Rekord C 2200 - 2239 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Power Valve Diaphragm
  • Complete needle valve, size 200
  • Float chamber gasket
  • Base gaskets
  • Choke gaskets
  • Various copper washers
  • Various aluminum washers
  • Various rubber / Viton washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel C Rekord 2200

PMS178
Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel D Rekord 1700 S

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel D Rekord 1700 S

Service kit for the Solex and Pierburg DIDTA 32 series carburetors as used on, amongst others, the:

  • Opel Rekord D 1700 S - 1698 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Power Valve Diaphragm
  • Complete needle valve, size 200
  • Float chamber gasket
  • Base gaskets
  • Choke gaskets
  • Various copper washers
  • Various aluminum washers
  • Various rubber / Viton washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32 DIDTA carburetors for Opel D Rekord 1700 S

PMS178
Service Kit for Solex Pierburg 32 DIDTA carburetors for Vauxhall Cavalier 1600

Service Kit for Solex Pierburg 32 DIDTA carburetors for Vauxhall Cavalier 1600

Service kit for the Solex and Pierburg DIDTA 32 series carburetors as used on, amongst others, the:

  • 1975 - 1981 Vauxhall Cavalier 1600 - 1584 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Power Valve Diaphragm
  • Complete needle valve, size 200
  • Float chamber gasket
  • Base gaskets
  • Choke gaskets
  • Various copper washers
  • Various aluminum washers
  • Various rubber / Viton washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32 DIDTA carburetors for Vauxhall Cavalier 1600

PMS157
Service Kit for Solex Pierburg 32-32 DIDTA carburetors

Service Kit for Solex Pierburg 32-32 DIDTA carburetors

Service kit for the Solex and Pierburg DIDTA 32-32 series carburetors.

This rebuild kit contains, amongst others, the following parts to service 1 carburettor as depicted in the photo:

  • Pump diaphragm
  • Complete needle valve, size 200
  • Elaborate gasket set
  • Base gaskets
  • Copper washer
  • Various rubber / Viton o-rings

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32-32 DIDTA carburetors

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the end of October.
Supply will be limited so secure yours NOW.

PMS157
Service Kit for Solex Pierburg 32-32 DIDTA carburetors for BMW 2002

Service Kit for Solex Pierburg 32-32 DIDTA carburetors for BMW 2002

Service kit for the Solex and Pierburg DIDTA 32-32 series carburetors, as used on, amongst others, the:

  • 1973 - 1975 BW 2002 - 1990 cc

This rebuild kit contains, amongst others, the following parts to service 1 carburettor as depicted in the photo:

  • Pump diaphragm
  • Complete needle valve, size 200
  • Elaborate gasket set
  • Base gaskets
  • Copper washer
  • Various rubber / Viton o-rings

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32-32 DIDTA carburetors for BMW 2002

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the end of October.
Supply will be limited so secure yours NOW.

PMS157
Service Kit for Solex Pierburg 32-32 DIDTA carburetors for BMW 316

Service Kit for Solex Pierburg 32-32 DIDTA carburetors for BMW 316

Service kit for the Solex and Pierburg DIDTA 32-32 series carburetors, as used on, amongst others, the:

  • 1975 - 1980 BW 316 - 1573 cc

This rebuild kit contains, amongst others, the following parts to service 1 carburettor as depicted in the photo:

  • Pump diaphragm
  • Complete needle valve, size 200
  • Elaborate gasket set
  • Base gaskets
  • Copper washer
  • Various rubber / Viton o-rings

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32-32 DIDTA carburetors for BMW 316

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the end of October.
Supply will be limited so secure yours NOW.

PMS157
Service Kit for Solex Pierburg 32-32 DIDTA carburetors for BMW 318

Service Kit for Solex Pierburg 32-32 DIDTA carburetors for BMW 318

Service kit for the Solex and Pierburg DIDTA 32-32 series carburetors, as used on, amongst others, the:

  • 1975 - 1980 BW 318 - 1766 cc

This rebuild kit contains, amongst others, the following parts to service 1 carburettor as depicted in the photo:

  • Pump diaphragm
  • Complete needle valve, size 200
  • Elaborate gasket set
  • Base gaskets
  • Copper washer
  • Various rubber / Viton o-rings

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32-32 DIDTA carburetors for BMW 318

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the end of October.
Supply will be limited so secure yours NOW.

PMS157
Service Kit for Solex Pierburg 32-32 DIDTA carburetors for BMW 320

Service Kit for Solex Pierburg 32-32 DIDTA carburetors for BMW 320

Service kit for the Solex and Pierburg DIDTA 32-32 series carburetors, as used on, amongst others, the:

  • 1975 - 1980 BW 320 - 1990 cc

This rebuild kit contains, amongst others, the following parts to service 1 carburettor as depicted in the photo:

  • Pump diaphragm
  • Complete needle valve, size 200
  • Elaborate gasket set
  • Base gaskets
  • Copper washer
  • Various rubber / Viton o-rings

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32-32 DIDTA carburetors for BMW 320

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the end of October.
Supply will be limited so secure yours NOW.

PMS157
Service Kit for Solex Pierburg 32-32 DIDTA carburetors for BMW 518

Service Kit for Solex Pierburg 32-32 DIDTA carburetors for BMW 518

Service kit for the Solex and Pierburg DIDTA 32-32 series carburetors, as used on, amongst others, the:

  • 1975 - 1980 BW 518 - 1766 cc

This rebuild kit contains, amongst others, the following parts to service 1 carburettor as depicted in the photo:

  • Pump diaphragm
  • Complete needle valve, size 200
  • Elaborate gasket set
  • Base gaskets
  • Copper washer
  • Various rubber / Viton o-rings

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32-32 DIDTA carburetors for BMW 518

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the end of October.
Supply will be limited so secure yours NOW.

PMS157
Service Kit for Solex Pierburg 32-32 DIDTA carburetors for BMW 520

Service Kit for Solex Pierburg 32-32 DIDTA carburetors for BMW 520

Service kit for the Solex and Pierburg DIDTA 32-32 series carburetors, as used on, amongst others, the:

  • 1975 - 1980 BW 520 - 1990 cc

This rebuild kit contains, amongst others, the following parts to service 1 carburettor as depicted in the photo:

  • Pump diaphragm
  • Complete needle valve, size 200
  • Elaborate gasket set
  • Base gaskets
  • Copper washer
  • Various rubber / Viton o-rings

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32-32 DIDTA carburetors for BMW 520

PLEASE NOTE:
This set is currently on order from our supplier.
We expect it to arrive at our warehouse by the end of October.
Supply will be limited so secure yours NOW.

DIS32 TURBO
Service Kit for Solex 32 DIS Turbo carburetors

Service Kit for Solex 32 DIS Turbo carburetors

Service kit for the Solex 32DIS carburetor as used on many turbo-engined cars of French origin.

This kit contains, amongst other, the following parts to service 1 carburettor:

  • Various gaskets
  • Various Diaphragms
  • Needle Valve Size 170
  • Manifold / carburettor heat insulating block
  • Inlet Plenum Gaskets
  • Various rubber o-rings and aluminum washers

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 32 DIS Turbo carburetors

DIS32 TURBO
Service Kit for Solex 32 DIS carburetors for Renault 9 Turbo

Service Kit for Solex 32 DIS carburetors for Renault 9 Turbo

Service kit for the Solex 32DIS carburetor as used on, amongst other, the following Renault models:

  • Renault 9 Turbo

This kit contains, amongst other, the following parts to service 1 carburettor:

  • Various gaskets
  • Various Diaphragms
  • Needle Valve Size 170
  • Manifold / carburettor heat insulating block
  • Inlet Plenum Gaskets
  • Various rubber o-rings and aluminum washers

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 32 DIS carburetors for Renault 9 Turbo

DIS32 TURBO
Service Kit for Solex 32 DIS carburetors for Renault 11 Turbo

Service Kit for Solex 32 DIS carburetors for Renault 11 Turbo

Service kit for the Solex 32DIS carburetor as used on, amongst other, the following Renault models:

  • Renault 11 Turbo

This kit contains, amongst other, the following parts to service 1 carburettor:

  • Various gaskets
  • Various Diaphragms
  • Needle Valve Size 170
  • Manifold / carburettor heat insulating block
  • Inlet Plenum Gaskets
  • Various rubber o-rings and aluminum washers

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 32 DIS carburetors for Renault 11 Turbo

DIS32 TURBO
Service Kit for Solex 32 DIS carburetors for Renault 18 Turbo

Service Kit for Solex 32 DIS carburetors for Renault 18 Turbo

Service kit for the Solex 32DIS carburetor as used on, amongst other, the following Renault models:

  • Renault 18 Turbo

This kit contains, amongst other, the following parts to service 1 carburettor:

  • Various gaskets
  • Various Diaphragms
  • Needle Valve Size 170
  • Manifold / carburettor heat insulating block
  • Inlet Plenum Gaskets
  • Various rubber o-rings and aluminum washers

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 32 DIS carburetors for Renault 18 Turbo

DIS32 TURBO
Service Kit for Solex 32 DIS carburetors for Renault Fuego Turbo

Service Kit for Solex 32 DIS carburetors for Renault Fuego Turbo

Service kit for the Solex 32DIS carburetor as used on, amongst other, the following Renault models:

  • Renault Fuego Turbo

This kit contains, amongst other, the following parts to service 1 carburettor:

  • Various gaskets
  • Various Diaphragms
  • Needle Valve Size 170
  • Manifold / carburettor heat insulating block
  • Inlet Plenum Gaskets
  • Various rubber o-rings and aluminum washers

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 32 DIS carburetors for Renault Fuego Turbo

DIS32 TURBO
Service Kit for Solex 32 DIS carburetors for Renault 5 GT Turbo

Service Kit for Solex 32 DIS carburetors for Renault 5 GT Turbo

Service kit for the Solex 32DIS carburetor as used on, amongst other, the following Renault models:

  • Renault 5 GT Turbo

This kit contains, amongst other, the following parts to service 1 carburettor:

  • Various gaskets
  • Various Diaphragms
  • Needle Valve Size 170
  • Manifold / carburettor heat insulating block
  • Inlet Plenum Gaskets
  • Various rubber o-rings and aluminum washers

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 32 DIS carburetors for Renault 5 GT Turbo

PMS138J
Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor - PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor - PMS138J

Service kit for the Solex 32-35 EEIT and Pierburg 32-35EEIT carburetor.

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Various gaskets
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers
  • 2 x Idle Jet - Size 47.5
  • 2 x Main Jet - Size 130

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor - PMS138J

PMS138J
Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Capri MKII 2000 - PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Capri MKII 2000 - PMS138J

Service kit for the Solex 32-35 EEIT and Pierburg 32-35EEIT carburetor as used on, amongst others, the:

  • Ford Capri GL MKII 2000 V6 - 1998 cc
  • Ford Capri GT MKII 2000 V6 - 1998 cc
  • Ford Capri S MKII 2000 V6 - 1998 cc

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Various gaskets
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers
  • 2 x Idle Jet - Size 47.5
  • 2 x Main Jet - Size 130

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Capri MKII 2000 - PMS138J

PMS138J
Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Granada 2000 V6 - PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Granada 2000 V6 - PMS138J

Service kit for the Solex 32-35 EEIT and Pierburg 32-35EEIT carburetor as used on, amongst others, the:

  • Ford Granada 2000 V6 - 1998 cc

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Various gaskets
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers
  • 2 x Idle Jet - Size 47.5
  • 2 x Main Jet - Size 130

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Granada 2000 V6 - PMS138J

PMS138J
Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Granada 2300 V6 - PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Granada 2300 V6 - PMS138J

Service kit for the Solex 32-35 EEIT and Pierburg 32-35EEIT carburetor as used on, amongst others, the:

  • Ford Granada 2300 V6 - 1998 cc

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Various gaskets
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers
  • 2 x Idle Jet - Size 47.5
  • 2 x Main Jet - Size 130

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Granada 2300 V6 - PMS138J

PMS138J
Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Granada 2600 V6 - PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Granada 2600 V6 - PMS138J

Service kit for the Solex 32-35 EEIT and Pierburg 32-35EEIT carburetor as used on, amongst others, the:

  • Ford Granada 2600 V6 - 1998 cc

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Various gaskets
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers
  • 2 x Idle Jet - Size 47.5
  • 2 x Main Jet - Size 130

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Granada 2600 V6 - PMS138J

PMS138J
Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Taunus 2000 V6 - PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Taunus 2000 V6 - PMS138J

Service kit for the Solex 32-35 EEIT and Pierburg 32-35EEIT carburetor as used on, amongst others, the:

  • Ford Taunus 2000 V6 - 1998 cc

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Various gaskets
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers
  • 2 x Idle Jet - Size 47.5
  • 2 x Main Jet - Size 130

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Taunus 2000 V6 - PMS138J

PMS138J
Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Taunus 2300 V6 - PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Taunus 2300 V6 - PMS138J

Service kit for the Solex 32-35 EEIT and Pierburg 32-35EEIT carburetor as used on, amongst others, the:

  • Ford Taunus 2300 V6 - 1998 cc

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Various gaskets
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers
  • 2 x Idle Jet - Size 47.5
  • 2 x Main Jet - Size 130

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Taunus 2300 V6 - PMS138J

PMS138J
Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Taunus 2600 V6 - PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Taunus 2600 V6 - PMS138J

Newly arrived Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Taunus 2600 V6 - PMS138J

Service kit for the Solex 32-35 EEIT and Pierburg 32-35EEIT carburetor as used on, amongst others, the:

  • Ford Taunus 2600 V6 - 1998 cc

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Various gaskets
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers
  • 2 x Idle Jet - Size 47.5
  • 2 x Main Jet - Size 130

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS138J

Service Kit with Jets for Solex and Pierburg 32-35 EEIT carburetor for Ford Taunus 2600 V6 - PMS138J

PMS256
Service Kit for Solex Pierburg 35 EEIT carburetors

Service Kit for Solex Pierburg 35 EEIT carburetors

Service kit for the Solex 35 EEIT and Pierburg 35EEIT carburetor.

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Base gasket
  • Top Gasket
  • Float Chamber Gasket
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various other diaphragms - anti-stall - part throttle enrichment etc.
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 35 EEIT carburetors

PMS256
Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Capri 2300 & 2500

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Capri 2300 & 2500

Service kit for the Solex 35 EEIT and Pierburg 35EEIT carburetor as used on, amongst others, the:

  • Ford Capri MKII 2300
  • Ford Capri MKII 2500

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Base gasket
  • Top Gasket
  • Float Chamber Gasket
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various other diaphragms - anti-stall - part throttle enrichment etc.
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Capri 2300 & 2500

PMS256
Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Consul 2300

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Consul 2300

Service kit for the Solex 35 EEIT and Pierburg 35EEIT carburetor as used on, amongst others, the:

  • 1977 - 1982 Ford Consul 2300 - 2293 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Base gasket
  • Top Gasket
  • Float Chamber Gasket
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various other diaphragms - anti-stall - part throttle enrichment etc.
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Consul 2300

PMS256
Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Cortina 2300 MKV

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Cortina 2300 MKV

Service kit for the Solex 35 EEIT and Pierburg 35EEIT carburetor as used on, amongst others, the:

  • 1977 - 1982 MKV Ford Cortina 2300 - 2293 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Base gasket
  • Top Gasket
  • Float Chamber Gasket
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various other diaphragms - anti-stall - part throttle enrichment etc.
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Cortina 2300 MKV

PMS256
Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Granada 2000, 2300 & 2600

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Granada 2000, 2300 & 2600

Service kit for the Solex 35 EEIT and Pierburg 35EEIT carburetor as used on, amongst others, the:

  • 1975 - 1981 Ford Granada 2000 V6 - 1998 cc
  • 1975 - 1985 Ford Granada 2300 - 2293 cc
  • 1975 - 1977 Ford Granada 2600 - 2550 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Base gasket
  • Top Gasket
  • Float Chamber Gasket
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various other diaphragms - anti-stall - part throttle enrichment etc.
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Granada 2000, 2300 & 2600

PMS256
Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Sierra 2300

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Sierra 2300

Service kit for the Solex 35 EEIT and Pierburg 35EEIT carburetor as used on, amongst others, the:

  • 1982 - 1985 Ford Sierra 2300 - 2293 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Base gasket
  • Top Gasket
  • Float Chamber Gasket
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various other diaphragms - anti-stall - part throttle enrichment etc.
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Sierra 2300

PMS256
Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Taunus 2300L

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Taunus 2300L

Service kit for the Solex 35 EEIT and Pierburg 35EEIT carburetor as used on, amongst others, the:

  • Ford Taunus 2300 L - 2293 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Base gasket
  • Top Gasket
  • Float Chamber Gasket
  • Needle Valve Needle with rubber (Viton) tip
  • Pump Diaphragm
  • Various other diaphragms - anti-stall - part throttle enrichment etc.
  • Various rubber (Viton) o-rings
  • Fiber Washer
  • Various Aluminium Washers

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

Please note that the EEIT was sold both under the Pierburg brand as well as under the Solex brand.

This is a Carburetor City carburettor service set, Made in Italy to the most exacting standards.

Service Kit for Solex Pierburg 35 EEIT carburetors for Ford Taunus 2300L

FR3271
Service Kit for Solex 32 EHSA carburetors

Service Kit for Solex 32 EHSA carburetors

Service kit for the Solex 32 EHSA carburetor as used mainly by Daf and Volvo.

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Base gaskets
  • Float Chamber Gasket
  • Needle Valve - Size 150
  • Pump Diaphragm
  • Various copper washers

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 32 EHSA carburetors

FR3271
Service Kit for Solex 32 EHSA carburetors for Daf 55

Service Kit for Solex 32 EHSA carburetors for Daf 55

Service kit for the Solex 32 EHSA carburetor as used on the 1108 cc Daf 55.

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Base gaskets
  • Float Chamber Gasket
  • Needle Valve - Size 150
  • Pump Diaphragm
  • Various copper washers

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 32 EHSA carburetors for Daf 55

FR3271
Service Kit for Solex 32 EHSA carburetors for Daf 66

Service Kit for Solex 32 EHSA carburetors for Daf 66

Service kit for the Solex 32 EHSA carburetor as used on the:

  • Daf 66 - 1108 cc
  • Daf 66 - 1289 cc

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Base gaskets
  • Float Chamber Gasket
  • Needle Valve - Size 150
  • Pump Diaphragm
  • Various copper washers

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 32 EHSA carburetors for Daf 66

FR3271
Service Kit for Solex 32 EHSA carburetors for Volvo 66

Service Kit for Solex 32 EHSA carburetors for Volvo 66

Service kit for the Solex 32 EHSA carburetor as used on the:

  • Volvo 66 - 1289 cc

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Base gaskets
  • Float Chamber Gasket
  • Needle Valve - Size 150
  • Pump Diaphragm
  • Various copper washers

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 32 EHSA carburetors for Volvo 66

FR3271
Service Kit for Solex 32 EHSA carburetors for Volvo 360

Service Kit for Solex 32 EHSA carburetors for Volvo 360

Service kit for the Solex 32 EHSA carburetor as used on the:

  • Volvo 360

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • Base gaskets
  • Float Chamber Gasket
  • Needle Valve - Size 150
  • Pump Diaphragm
  • Various copper washers

Please don't hesitate to contact us if you are unsure if the is the correct service set for your carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 32 EHSA carburetors for Volvo 360

FR3533
Service Kit for Solex 32 EIES 43-44-45 carburetors for Alfa Romeo Alfa 33 1300

Service Kit for Solex 32 EIES 43-44-45 carburetors for Alfa Romeo Alfa 33 1300

Service kit for the Solex 32 EIES 43-44-45 series carburetors as used on, amongst others, the:

  • Alfa Romeo Alfa 33 1300 - 1290 cc

Although these carburetors were originally specified for the above cars, they could have been transplanted onto other cars and engines so the range of vehicles that these service sets might fit is much broader.

Alternatively, it is very well possible that your car is no longer be equipped with the carburetor that it left the factory with.

So, we advise you to check carefully if the parts in the picture will fit your carburetor.

In some extreme cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Complete needle valve (size 1,6)
  • Float chamber gasket
  • Base gasket
  • Other required gaskets
  • Various rubber (Viton) o-rings
  • Various copper washers

This is a Carburetor City carburettor service set, Made in Italy to the highest standards.

PLEASE NOTE:
Demand for these kits is extremely low and consequently they have been taken out of production.
However, we managed to lay our hands on a couple of these sets.
So, we can only offer them as long as the stock lasts.
When they're gone, they're gone!

Service Kit for Solex 32 EIES 43-44-45 carburetors for Alfa Romeo Alfa 33 1300

FR3533
Service Kit for Solex 32 EIES 43-44-45 carburetors for Alfa Romeo Alfa 33 1500

Service Kit for Solex 32 EIES 43-44-45 carburetors for Alfa Romeo Alfa 33 1500

Service kit for the Solex 32 EIES 43-44-45 series carburetors as used on, amongst others, the:

  • Alfa Romeo Alfa 33 1500 - 1490 cc

Although these carburetors were originally specified for the above cars, they could have been transplanted onto other cars and engines so the range of vehicles that these service sets might fit is much broader.

Alternatively, it is very well possible that your car is no longer be equipped with the carburetor that it left the factory with.

So, we advise you to check carefully if the parts in the picture will fit your carburetor.

In some extreme cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Complete needle valve (size 1,6)
  • Float chamber gasket
  • Base gasket
  • Other required gaskets
  • Various rubber (Viton) o-rings
  • Various copper washers

This is a Carburetor City carburettor service set, Made in Italy to the highest standards.

PLEASE NOTE:
Demand for these kits is extremely low and consequently they have been taken out of production.
However, we managed to lay our hands on a couple of these sets.
So, we can only offer them as long as the stock lasts.
When they're gone, they're gone!

Service Kit for Solex 32 EIES 43-44-45 carburetors for Alfa Romeo Alfa 33 1500

FR3533
Service Kit for Solex 32 EIES 43-44-45 carburetors for Alfa Romeo Alfasud 1200

Service Kit for Solex 32 EIES 43-44-45 carburetors for Alfa Romeo Alfasud 1200

Service kit for the Solex 32 EIES 43-44-45 series carburetors as used on, amongst others, the:

  • Alfa Romeo Alfasud 1200 - 1186 cc

Although these carburetors were originally specified for the above cars, they could have been transplanted onto other cars and engines so the range of vehicles that these service sets might fit is much broader.

Alternatively, it is very well possible that your car is no longer be equipped with the carburetor that it left the factory with.

So, we advise you to check carefully if the parts in the picture will fit your carburetor.

In some extreme cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Complete needle valve (size 1,6)
  • Float chamber gasket
  • Base gasket
  • Other required gaskets
  • Various rubber (Viton) o-rings
  • Various copper washers

This is a Carburetor City carburettor service set, Made in Italy to the highest standards.

PLEASE NOTE:
Demand for these kits is extremely low and consequently they have been taken out of production.
However, we managed to lay our hands on a couple of these sets.
So, we can only offer them as long as the stock lasts.
When they're gone, they're gone!

Service Kit for Solex 32 EIES 43-44-45 carburetors for Alfa Romeo Alfasud 1200

FR3533
Service Kit for Solex 32 EIES 43-44-45 carburetors for Alfa Romeo Alfasud 1300

Service Kit for Solex 32 EIES 43-44-45 carburetors for Alfa Romeo Alfasud 1300

Service kit for the Solex 32 EIES 43-44-45 series carburetors as used on, amongst others, the:

  • Alfa Romeo Alfasud 1300 - 1290 cc

Although these carburetors were originally specified for the above cars, they could have been transplanted onto other cars and engines so the range of vehicles that these service sets might fit is much broader.

Alternatively, it is very well possible that your car is no longer be equipped with the carburetor that it left the factory with.

So, we advise you to check carefully if the parts in the picture will fit your carburetor.

In some extreme cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Complete needle valve (size 1,6)
  • Float chamber gasket
  • Base gasket
  • Other required gaskets
  • Various rubber (Viton) o-rings
  • Various copper washers

This is a Carburetor City carburettor service set, Made in Italy to the highest standards.

PLEASE NOTE:
Demand for these kits is extremely low and consequently they have been taken out of production.
However, we managed to lay our hands on a couple of these sets.
So, we can only offer them as long as the stock lasts.
When they're gone, they're gone!

Service Kit for Solex 32 EIES 43-44-45 carburetors for Alfa Romeo Alfasud 1300

FR3533
Service Kit for Solex 32 EIES 43-44-45 carburetors for Alfa Romeo Alfasud 1500

Service Kit for Solex 32 EIES 43-44-45 carburetors for Alfa Romeo Alfasud 1500

Service kit for the Solex 32 EIES 43-44-45 series carburetors as used on, amongst others, the:

  • Alfa Romeo Alfasud 1500 - 1490 cc

Although these carburetors were originally specified for the above cars, they could have been transplanted onto other cars and engines so the range of vehicles that these service sets might fit is much broader.

Alternatively, it is very well possible that your car is no longer be equipped with the carburetor that it left the factory with.

So, we advise you to check carefully if the parts in the picture will fit your carburetor.

In some extreme cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Complete needle valve (size 1,6)
  • Float chamber gasket
  • Base gasket
  • Other required gaskets
  • Various rubber (Viton) o-rings
  • Various copper washers

This is a Carburetor City carburettor service set, Made in Italy to the highest standards.

PLEASE NOTE:
Demand for these kits is extremely low and consequently they have been taken out of production.
However, we managed to lay our hands on a couple of these sets.
So, we can only offer them as long as the stock lasts.
When they're gone, they're gone!

Service Kit for Solex 32 EIES 43-44-45 carburetors for Alfa Romeo Alfasud 1500

FR3533
Service Kit for Solex 32 EIES 43-44 carburetors for Alfa Romeo Alfasud 1500 TI

Service Kit for Solex 32 EIES 43-44 carburetors for Alfa Romeo Alfasud 1500 TI

Service kit for the Solex 32 EIES 43-44 series carburetors as used on, amongst others, the:

  • Alfa Romeo Alfasud 1500 TI - 1490 cc
  • Alfa Romeo Alfasud Sprint 1500 TI - 1490 cc

Although these carburetors were originally specified for the above cars, they could have been transplanted onto other cars and engines so the range of vehicles that these service sets might fit is much broader.

Alternatively, it is very well possible that your car is no longer be equipped with the carburetor that it left the factory with.

So, we advise you to check carefully if the parts in the picture will fit your carburetor.

In some extreme cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Complete needle valve (size 1,6)
  • Float chamber gasket
  • Base gasket
  • Other required gaskets
  • Various rubber (Viton) o-rings
  • Various copper washers

This is a Carburetor City carburettor service set, Made in Italy to the highest standards.

PLEASE NOTE:
Demand for these kits is extremely low and consequently they have been taken out of production.
However, we managed to lay our hands on a couple of these sets.
So, we can only offer them as long as the stock lasts.
When they're gone, they're gone!

Service Kit for Solex 32 EIES 43-44 carburetors for Alfa Romeo Alfasud 1500 TI

PMS247
Service Kit for Solex 32 EISA carburetors

Service Kit for Solex 32 EISA carburetors

Service kit for the Solex 32 EISA carburetors.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Power Valve Diaphragm
  • Various gaskets
  • Aluminum washer
  • Various fiber washers
  • Copper washer
  • Various rubber o-rings

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please note that this carburettor was sold as well as Pierburg TDID, as Solex TDID and Solex EISA.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Solex 32 EISA carburetors

PMS247
Service Kit for Solex 32 EISA carburetors for Renault 12

Service Kit for Solex 32 EISA carburetors for Renault 12

Service kit for the Solex 32 EISA carburetors as used on, amongst others, the:

  • 1972 - 1980 Renault 12 R1170
  • 1972 - 1980 Renault 12 R1171
  • 1972 - 1980 Renault 12 R1130

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Power Valve Diaphragm
  • Various gaskets
  • Aluminum washer
  • Various fiber washers
  • Copper washer
  • Various rubber o-rings

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please note that this carburettor was sold as well as Pierburg TDID, as Solex TDID and Solex EISA.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Solex 32 EISA carburetors for Renault 12

PMS247
Service Kit for Solex 32 EISA carburetors for Renault 15

Service Kit for Solex 32 EISA carburetors for Renault 15

Service kit for the Solex 32 EISA carburetors as used on, amongst others, the:

  • 1971 - 1980 Renault 15 R1130

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the parts to service 1 carburettor.

The parts included are, amongst others:

  • Needle valve
  • Pump diaphragm
  • Power Valve Diaphragm
  • Various gaskets
  • Aluminum washer
  • Various fiber washers
  • Copper washer
  • Various rubber o-rings

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

Please note that this carburettor was sold as well as Pierburg TDID, as Solex TDID and Solex EISA.

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Solex 32 EISA carburetors for Renault 15

PMI2
Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 230 W110

Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 230 W110

Service Kit for the Solex INAT 35-40 carburetors as used on, amongst others, the following Mercedes W114 models:

  • 1965 - 1968 6-Cilinder Mercedes-Benz 230 W110 - 2303 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • All required gaskets
  • Both Diaphragms
  • Complete needle valve - size 200
  • Various O-Rings
  • Copper washer

This is a Carburetor City service kit of outstanding Italian manufacture.

Please note that the Solex INAT was also produced as Zenith INAT.
The Zenith INAT can be found HERE.

Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 230 W110

PMI2
Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 280 S W110

Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 280 S W110

Service Kit for the Solex INAT 35-40 carburetors as used on, amongst others, the following Mercedes W114 models:

  • 1968 - 1972 Mercedes-Benz 280S W110 - 2778 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • All required gaskets
  • Both Diaphragms
  • Complete needle valve - size 200
  • Various O-Rings
  • Copper washer

This is a Carburetor City service kit of outstanding Italian manufacture.

Please note that the Solex INAT was also produced as Zenith INAT.
The Zenith INAT can be found HERE.

Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 280 S W110

PMI2
Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 220 W111

Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 220 W111

Service Kit for the Solex INAT 35-40 carburetors as used on, amongst others, the following Mercedes W111 models:

  • 1965 - 1968 6-Cilinder Mercedes-Benz 220 W111 - 2195 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • All required gaskets
  • Both Diaphragms
  • Complete needle valve - size 200
  • Various O-Rings
  • Copper washer

This is a Carburetor City service kit of outstanding Italian manufacture.

Please note that the Solex INAT was also produced as Zenith INAT.
The Zenith INAT can be found HERE.

Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 220 W111

PMI2
Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 230 W111

Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 230 W111

Service Kit for the Solex INAT 35-40 carburetors as used on, amongst others, the following Mercedes W114 models:

  • 1965 - 1968 6-Cilinder Mercedes-Benz 230 W111 - 2295 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • All required gaskets
  • Both Diaphragms
  • Complete needle valve - size 200
  • Various O-Rings
  • Copper washer

This is a Carburetor City service kit of outstanding Italian manufacture.

Please note that the Solex INAT was also produced as Zenith INAT.
The Zenith INAT can be found HERE.

Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 230 W111

PMI2
Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 250 W114

Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 250 W114

Service Kit for the Solex INAT 35-40 carburetors as used on, amongst others, the following Mercedes W114 models:

  • 1965 - 1968 Mercedes-Benz 250 W114 - 2496 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • All required gaskets
  • Both Diaphragms
  • Complete needle valve - size 200
  • Various O-Rings
  • Copper washer

This is a Carburetor City service kit of outstanding Italian manufacture.

Please note that the Solex INAT was also produced as Zenith INAT.
The Zenith INAT can be found HERE.

Service Kit for Solex INAT 35-40 carburetors for Mercedes-Benz 250 W114

PMI2
Service Kit for Solex INAT 35-40 / 42 carburetors for Mercedes-Benz 250/8 Coupe W114

Service Kit for Solex INAT 35-40 / 42 carburetors for Mercedes-Benz 250/8 Coupe W114

Service Kit for the Solex INAT 35-40/42 carburetors as used on, amongst others, the following Mercedes W114 models:

  • 1968 - 1976 Mercedes-Benz 250/8 Coupé W114 - 2496 cc
  • 1968 - 1976 Mercedes-Benz 250/8 Coupé W114 - 2778 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the following parts to service 1 carburettor:

  • All required gaskets
  • Both Diaphragms
  • Complete needle valve - size 200
  • Various O-Rings
  • Copper washer

This is a Carburetor City service kit of outstanding Italian manufacture.

Please note that the Solex INAT was also produced as Zenith INAT.
The Zenith INAT can be found HERE.

Service Kit for Solex INAT 35-40 / 42 carburetors for Mercedes-Benz 250/8 Coupe W114

PMS184
Rebuild Kit for Solex 32-35 MIMSA carburetors

Rebuild Kit for Solex 32-35 MIMSA carburetors

Service kit for the Solex 32-35 MIMSA carburetors.

This rebuild kit contains, amongst others, the following parts to service 1 carburettor:

  • Elaborate Gasket Set
  • Pump Diaphragm
  • Power Valve Diaphragm
  • Needle Valve assembly; size 1.7
  • Various O-Rings
  • Various Copper Washers

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex 32-35 MIMSA carburetors

PMS184
Rebuild Kit for Solex 32-35 MIMSA carburetors for Peugeot 504 - PMS184

Rebuild Kit for Solex 32-35 MIMSA carburetors for Peugeot 504 - PMS184

Service kit for the Solex 32-35 MIMSA carburetors as used on, amongst others, the:

  • 1975 - 1983 Peugeot 504 XN1 - 1971 cc

This rebuild kit contains, amongst others, the following parts to service 1 carburettor:

  • Elaborate Gasket Set
  • Pump Diaphragm
  • Power Valve Diaphragm
  • Needle Valve assembly; size 1.7
  • Various O-Rings
  • Various Copper Washers

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Article Number: PMS184

Rebuild Kit for Solex 32-35 MIMSA carburetors for Peugeot 504 - PMS184

ECSKT10
Service Kit for Solex 44 PAI carburetors for Volvo Penta Marine

Service Kit for Solex 44 PAI carburetors for Volvo Penta Marine

Service kit for the Solex 44 PAI carburetor as used on, amongst others, Volvo Penta Marine Engines:

  • AQ115
  • AQ130A
  • AQ130C
  • AQ145 OHC
  • AQ170
  • BB115B
  • BB170B

Contains the parts to service 1 carburettor.

Consists of the following parts:

  • Various gaskets
  • Pump diaphragm
  • Needle Valve
  • Various copper washers
  • Various aluminum washers
  • Special ruler to set the float level

For the exact contents, please see the photograph.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 44 PAI carburetors for Volvo Penta Marine

PMS101
Service Kit for Solex 32 PAIA carburetors

Service Kit for Solex 32 PAIA carburetors

Service kit for the Solex 32PAIA carburetors.

Contains the following parts to service 1 carburettor:

  • Various gaskets
  • Pump diaphragm
  • Nitrile pump housing gasket
  • Needle Valve Size 150
  • Various copper washers
  • Various fiber washers

For the exact contents, please see the photograph.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 32 PAIA carburetors

PMS101
Rebuild Kit for Solex 32 PAIA 7-15 carburetors for Alfa Romeo Giulia 1300 TI

Rebuild Kit for Solex 32 PAIA 7-15 carburetors for Alfa Romeo Giulia 1300 TI

Rebuild kit for the Solex 32PAIA 7-15 carburetors as used on, amongst others, the:

  • 1290 cc Alfa Romeo Giulia 1300 TI

Contains the following parts to service 1 carburettor:

  • Various gaskets
  • Pump diaphragm
  • Nitrile pump housing gasket
  • Needle Valve Size 150
  • Various copper washers
  • Various fiber washers

For the exact contents, please see the photograph.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex 32 PAIA 7-15 carburetors for Alfa Romeo Giulia 1300 TI

PMS101J
Rebuild Kit with Jets for Solex 32 PAIA 7-15 carburetors

Rebuild Kit with Jets for Solex 32 PAIA 7-15 carburetors

Rebuild kit for the Solex 32PAIA 7-15 carburetors.

Contains the following parts from the regular service kit to service 1 carburettor:

  • Various gaskets
  • Pump diaphragm
  • Nitrile pump housing gasket
  • Needle Valve Size 150
  • Various copper washers
  • Various fiber washers

Additionally, this kit contains the following jets:

  • 1 x Idle Jet size 70
  • 1 x Idle Jet size 45
  • 1 x Main Jet size 120
  • 1 x Main Jet size 135

For the exact contents, please see the photograph.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit with Jets for Solex 32 PAIA 7-15 carburetors

CCR9950
Elaborate Rebuild Kit for Solex 32 PAIA carburetors

Elaborate Rebuild Kit for Solex 32 PAIA carburetors

This is our most elaborate rebuild kit for the Solex 32PAIA carburetors.

It contains the following parts to service 1 carburettor:

  • Manifold gasket
  • Float chamber gasket
  • Airfilter gasket
  • Complete pump diaphragm + extra sheets
  • Nitrile pump housing gasket
  • Choke housing gasket
  • Needle Valve Size 175
  • 2 Throttle shaft seals
  • 4 Brass throttle shaft bushings
  • 2 Throttle valve discs - 32 mm - 8°
  • 4 Throttle valve screws
  • Various copper washers
  • Various fiber washers
  • Rubber O-ring

For the exact contents, please see the photograph.

This is a Carburetor City service kit of superior Italian manufacture.

Elaborate Rebuild Kit for Solex 32 PAIA carburetors

FR4855
Service Kit for Solex 32 PAITA carburetors

Service Kit for Solex 32 PAITA carburetors

Service kit for the Solex 32PAITA carburetors.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 32 PAITA carburetors

FR4855
Service Kit for Solex 34 PAITA carburetors

Service Kit for Solex 34 PAITA carburetors

Service kit for the Solex 34PAITA carburetors.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 34 PAITA carburetors

FR4855
Service Kit for Solex 32 PAITA carburetors for BMW 501

Service Kit for Solex 32 PAITA carburetors for BMW 501

Service kit for the Solex 32PAITA carburetors as used on, amongst others, the:

  • 1954 - 1955 BMW 501 A
  • 1954 - 1955 BMW 501 B
  • 1955 - 1958 BMW 501/6

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 32 PAITA carburetors for BMW 501

FR4855
Service Kit for Solex 34 PAITA carburetors for BMW 3200 CS V8

Service Kit for Solex 34 PAITA carburetors for BMW 3200 CS V8

Service kit for the Solex 34PAITA carburetors as used on, amongst others, the:

  • 1960 - 1964 BMW 3200 CS V8

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 34 PAITA carburetors for BMW 3200 CS V8

FR4855
Service Kit for Solex 34 PAITA carburetors for Grosser Borgward

Service Kit for Solex 34 PAITA carburetors for Grosser Borgward

Service kit for the Solex 34PAITA carburetors as used on, amongst others, the:

  • 1960 - 1962 Borgward "Grosser Borgward"

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 34 PAITA carburetors for Grosser Borgward

FR4855
Service Kit for Solex 32 PAITA carburetors for Borgward H2300

Service Kit for Solex 32 PAITA carburetors for Borgward H2300

Service kit for the Solex 32PAITA carburetors as used on, amongst others, the:

  • 1956 - 1958 Borgward H2300

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 32 PAITA carburetors for Borgward H2300

FR4855
Service Kit for Solex 32 PAITA carburetors for Borgward Isabella TS

Service Kit for Solex 32 PAITA carburetors for Borgward Isabella TS

Service kit for the Solex 32PAITA carburetors as used on, amongst others, the:

  • 1955 - 1959 Borgward Isabella TS

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 32 PAITA carburetors for Borgward Isabella TS

FR4855
Service Kit for Solex 32 PAITA carburetors for Fiat 1400 A

Service Kit for Solex 32 PAITA carburetors for Fiat 1400 A

Service kit for the Solex 32PAITA carburetors as used on, amongst others, the:

  • 1954 - 1955 Fiat 1400 A

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City service kit of superior Italian manufacture.

Service kit for the Solex 32PAITA carburetors as used on the Fiat 1400 A

FR4855
Service Kit for Solex 32 PAITA carburetors for Fiat 1900 A

Service Kit for Solex 32 PAITA carburetors for Fiat 1900 A

Service kit for the Solex 32PAITA carburetors as used on, amongst others, the:

  • 1954 - 1955 Fiat 1900 A

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City service kit of superior Italian manufacture.

Service kit for the Solex 32PAITA carburetors as used on the Fiat 1900 A

FR4855
Service Kit for Solex 32 PAITA carburetors for Mercedes 190

Service Kit for Solex 32 PAITA carburetors for Mercedes 190

Service kit for the Solex 32PAITA carburetors as used on, amongst others, the:

  • 1956 - 1959 Mercedes Benz 190

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 32 PAITA carburetors for Mercedes 190

FR4855
Service Kit for Solex 32 PAITA carburetors for Mercedes 190 b

Service Kit for Solex 32 PAITA carburetors for Mercedes 190 b

Service kit for the Solex 32PAITA carburetors as used on, amongst others, the:

  • 1959 - 1961 Mercedes Benz 190 b

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 32 PAITA carburetors for Mercedes 190 b

FR4855
Service Kit for Solex 32 PAITA carburetors for Mercedes 220 S

Service Kit for Solex 32 PAITA carburetors for Mercedes 220 S

Service kit for the Solex 32PAITA carburetors as used on, amongst others, the:

  • 1956 - 1959 Mercedes Benz 220 S

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 32 PAITA carburetors for Mercedes 220 S

FR4855
Service Kit for Solex 34 PAITA carburetors for Mercedes 220 Sb

Service Kit for Solex 34 PAITA carburetors for Mercedes 220 Sb

Service kit for the Solex 34PAITA carburetors as used on, amongst others, the:

  • post-1959 Mercedes Benz 220 Sb

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 34 PAITA carburetors for Mercedes 220 Sb

FR4855
Service Kit for Solex 32 PAITA carburetors for Mercedes 300 b

Service Kit for Solex 32 PAITA carburetors for Mercedes 300 b

Service kit for the Solex 32PAITA carburetors as used on, amongst others, the:

  • 1954 - 1956 Mercedes Benz 300 b

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 32 PAITA carburetors for Mercedes 300 b

FR4855
Service Kit for Solex 32 PAITA carburetors for Steyr 2000

Service Kit for Solex 32 PAITA carburetors for Steyr 2000

Service kit for the Solex 32PAITA carburetors as used on, amongst others, the:

  • 1956 - 1958 Steyr 2000

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 32 PAITA carburetors for Steyr 2000

FR4855
Service Kit for Solex 32 PAITA carburetors for Steyr 2300

Service Kit for Solex 32 PAITA carburetors for Steyr 2300

Service kit for the Solex 32PAITA carburetors as used on, amongst others, the:

  • 1956 - 1958 Steyr 2300 Sport

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

Contains the following parts to service 1 carburettor:

  • Needle valve
  • Pump diaphragms
  • Various gaskets
  • Various fiber washers
  • Various copper washers

Please compare your old parts carefully with the ones in the picture. In some cases, it might be necessary to disassemble your carburetor to compare the individual parts prior to purchase.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex 32 PAITA carburetors for Steyr 2300

PMS115
Rebuild Kit for Solex 32 PBICA carburetors - PMS115

Rebuild Kit for Solex 32 PBICA carburetors - PMS115

Service kit for the Solex 32 PBICA carburetors.

This rebuild kit contains, amongst others, the following parts to service 1 carburettor:

  • Top Cover Gasket
  • Manifold Gasket
  • Pump Diaphragm
  • Flexible Pump Gasket
  • Flexible Pump Jet Gasket
  • Needle Valve assembly; size 1.7
  • Various Fiber Washers
  • Various Copper Washers

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex 32 PBICA carburetors - PMS115

PMS115
Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 403 - PMS115

Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 403 - PMS115

Service kit for the Solex 32 PBICA carburetors as used on, amongst others, the:

  • 1955 - 1962 Peugeot 403 - 1290 cc
  • 1955 - 1962 Peugeot 403 - 1468 cc

This rebuild kit contains, amongst others, the following parts to service 1 carburettor:

  • Top Cover Gasket
  • Manifold Gasket
  • Pump Diaphragm
  • Flexible Pump Gasket
  • Flexible Pump Jet Gasket
  • Needle Valve assembly; size 1.7
  • Various Fiber Washers
  • Various Copper Washers

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 403 - PMS115

PMS115
Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 404 - PMS115

Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 404 - PMS115

Newly arrived Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 404 - PMS115

Service kit for the Solex 32 PBICA carburetors as used on, amongst others, the:

  • 1962 - 1972 Peugeot 404 XC5 - 1618 cc
  • 1970 - 1975 Peugeot 404 XC7 - 1618 cc
  • 1966 - 1975 Peugeot 404 Automatic XC7 - 1618 cc

This rebuild kit contains, amongst others, the following parts to service 1 carburettor:

  • Top Cover Gasket
  • Manifold Gasket
  • Pump Diaphragm
  • Flexible Pump Gasket
  • Flexible Pump Jet Gasket
  • Needle Valve assembly; size 1.7
  • Various Fiber Washers
  • Various Copper Washers

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 404 - PMS115

PMS115
Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 504 - PMS115

Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 504 - PMS115

Service kit for the Solex 32 PBICA carburetors as used on, amongst others, the:

  • 1968 - 1975 Peugeot 504 XM - XM7 - 1796 cc

This rebuild kit contains, amongst others, the following parts to service 1 carburettor:

  • Top Cover Gasket
  • Manifold Gasket
  • Pump Diaphragm
  • Flexible Pump Gasket
  • Flexible Pump Jet Gasket
  • Needle Valve assembly; size 1.7
  • Various Fiber Washers
  • Various Copper Washers

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex 32 PBICA carburetors for Peugeot 504 - PMS115

Solex
PMS115
Rebuild Kit for Solex 32 PBICA carburetors for Peugeot J7 E & F - PMS115

Rebuild Kit for Solex 32 PBICA carburetors for Peugeot J7 E & F - PMS115

Service kit for the Solex 32 PBICA carburetors as used on, amongst others, the:

  • 1970 - 1975 Peugeot J7 E 1600 - 1618 cc
  • 1970 - 1975 Peugeot J7 F 1800 - 1796 cc

This rebuild kit contains, amongst others, the following parts to service 1 carburettor:

  • Top Cover Gasket
  • Manifold Gasket
  • Pump Diaphragm
  • Flexible Pump Gasket
  • Flexible Pump Jet Gasket
  • Needle Valve assembly; size 1.7
  • Various Fiber Washers
  • Various Copper Washers

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex 32 PBICA carburetors for Peugeot J7 E & F - PMS115

PMS176
Rebuild Kit for Solex 32 PBISA 12 carburetors for Citroën

Rebuild Kit for Solex 32 PBISA 12 carburetors for Citroën

Service kit for the Solex 32 PBISA carburetors as used by Citroën.

Please note that Peugeot and Talbot also used the 32 PBISA 12 but that the service kit for those cars differs in detail from this set.
The Peugeot & Talbot version can be found HERE.

This set contains, amongst others, the following parts to service 1 carburettor

  • Top Cover Gasket
  • 2 x Manifold Gasket
  • Pump Diaphragm
  • Flexible (Nitrile) Pump Jet Gasket
  • Needle Valve assembly; size 1.6
  • Various Rubber (Viton) O-Rings
  • Various Copper Washers

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

The exploded view drawing of the Solex PBISA can be found HERE.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex 32 PBISA 12 carburetors for Citroën

PMS176
Rebuild Kit for Solex 32 PBISA 12 carburetors for Citroën BX 11

Rebuild Kit for Solex 32 PBISA 12 carburetors for Citroën BX 11

Service kit for the Solex 32 PBISA carburetors as used on, amongst others, the:

  • Citroën BX 11 - 1124 cc

Please note that Peugeot and Talbot also used the 32 PBISA 12 but that the service kit for those cars differs in detail from this set.
The Peugeot & Talbot version can be found HERE.

This set contains, amongst others, the following parts to service 1 carburettor:

  • Top Cover Gasket
  • 2 x Manifold Gasket
  • Pump Diaphragm
  • Flexible (Nitrile) Pump Jet Gasket
  • Needle Valve assembly; size 1.6
  • Various Rubber (Viton) O-Rings
  • Various Copper Washers

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

The exploded view drawing of the Solex PBISA can be found HERE.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex 32 PBISA 12 carburetors for Citroën BX 11

PMS176
Rebuild Kit for Solex 32 PBISA 12 carburetors for Citroen LNA 11E and LNA 11 RE

Rebuild Kit for Solex 32 PBISA 12 carburetors for Citroen LNA 11E and LNA 11 RE

Service kit for the Solex 32 PBISA carburetors as used on, amongst others, the:

  • Citroën LNA 11 E - XW7 - 1124 cc
  • Citroën LNA 11 RE - XW7 - 1124 cc

Please note that Peugeot and Talbot also used the 32 PBISA 12 but that the service kit for those cars differs in detail from this set.
The Peugeot & Talbot version can be found HERE.

This set contains, amongst others, the following parts to service 1 carburettor:

  • Top Cover Gasket
  • 2 x Manifold Gasket
  • Pump Diaphragm
  • Flexible (Nitrile) Pump Jet Gasket
  • Needle Valve assembly; size 1.6
  • Various Rubber (Viton) O-Rings
  • Various Copper Washers

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

The exploded view drawing of the Solex PBISA can be found HERE.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex 32 PBISA 12 carburetors for Citroen LNA 11E and LNA 11 RE

PMS176
Rebuild Kit for Solex 32 PBISA 12 carburetors for Citroen Visa 10

Rebuild Kit for Solex 32 PBISA 12 carburetors for Citroen Visa 10

Service kit for the Solex 32 PBISA carburetors as used on, amongst others, the:

  • Citroën Visa 10 - 954 cc

Please note that Peugeot and Talbot also used the 32 PBISA 12 but that the service kit for those cars differs in detail from this set.
The Peugeot & Talbot version can be found HERE.

This set contains, amongst others, the following parts to service 1 carburettor:

  • Top Cover Gasket
  • 2 x Manifold Gasket
  • Pump Diaphragm
  • Flexible (Nitrile) Pump Jet Gasket
  • Needle Valve assembly; size 1.6
  • Various Rubber (Viton) O-Rings
  • Various Copper Washers

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

The exploded view drawing of the Solex PBISA can be found HERE.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex 32 PBISA 12 carburetors for Citroen Visa 10

PMS176
Rebuild Kit for Solex 32 PBISA 12 carburetors for Citroen Visa Super 11 E

Rebuild Kit for Solex 32 PBISA 12 carburetors for Citroen Visa Super 11 E

Service kit for the Solex 32 PBISA carburetors as used on, amongst others, the:

  • Citroën Visa Super 11 E - 1124 cc

Please note that Peugeot and Talbot also used the 32 PBISA 12 but that the service kit for those cars differs in detail from this set.
The Peugeot & Talbot version can be found HERE.

This set contains, amongst others, the following parts to service 1 carburettor:

  • Top Cover Gasket
  • 2 x Manifold Gasket
  • Pump Diaphragm
  • Flexible (Nitrile) Pump Jet Gasket
  • Needle Valve assembly; size 1.6
  • Various Rubber (Viton) O-Rings
  • Various Copper Washers

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

The exploded view drawing of the Solex PBISA can be found HERE.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex 32 PBISA 12 carburetors for Citroen Visa Super 11 E

PMS158
Rebuild Kit for Solex 32 PBISA 12 carburetors for Peugeot and Talbot

Rebuild Kit for Solex 32 PBISA 12 carburetors for Peugeot and Talbot

Service kit for the Solex 32 PBISA carburetors as used by Peugeot and Talbot.

Please note that Citroën also used the 32 PBISA 12 but that the service kit for the Citroën version differs in detail from this set.
The Citroën version can be found HERE.

This set contains, amongst others, the following parts to service 1 carburettor:

  • Top Cover Gasket
  • 2 x Manifold Gasket
  • Pump Diaphragm
  • Flexible (Nitrile) Pump Jet Gasket
  • Needle Valve assembly; size 1.6
  • Various Rubber (Viton) O-Rings
  • Various Copper Washers

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

The exploded view drawing of the Solex PBISA can be found HERE.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex 32 PBISA 12 carburetors for Peugeot and Talbot

PMS158
Rebuild Kit for Solex 32 PBISA 12 carburetors for Peugeot 104

Rebuild Kit for Solex 32 PBISA 12 carburetors for Peugeot 104

Service kit for the Solex 32 PBISA 12 carburetors as used on, amongst others, the:

  • Peugeot 205 1000 - 954 cc
  • Peugeot 205 1100 - 1124 cc

Please note that Citroën also used the 32 PBISA 12 but that the service kit for the Citroën version differs in detail from this set.
The Citroën version can be found HERE.

This set contains, amongst others, the following parts to service 1 carburettor:

  • Top Cover Gasket
  • 2 x Manifold Gasket
  • Pump Diaphragm
  • Flexible (Nitrile) Pump Jet Gasket
  • Needle Valve assembly; size 1.6
  • Various Rubber (Viton) O-Rings
  • Various Copper Washers

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

The exploded view drawing of the Solex PBISA can be found HERE.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex 32 PBISA 12 carburetors for Peugeot 104

PMS158
Rebuild Kit for Solex 32 PBISA 12 carburetors for Peugeot 205

Rebuild Kit for Solex 32 PBISA 12 carburetors for Peugeot 205

Service kit for the Solex 32 PBISA 12 carburetors as used on, amongst others, the:

  • Peugeot 205 1000 - 954 cc
  • Peugeot 205 1100 - 1124 cc (XV8 engine)

Please note that Citroën also used the 32 PBISA 12 but that the service kit for the Citroën version differs in detail from this set.
The Citroën version can be found HERE.

This set contains, amongst others, the following parts to service 1 carburettor:

  • Top Cover Gasket
  • 2 x Manifold Gasket
  • Pump Diaphragm
  • Flexible (Nitrile) Pump Jet Gasket
  • Needle Valve assembly; size 1.6
  • Various Rubber (Viton) O-Rings
  • Various Copper Washers

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

The exploded view drawing of the Solex PBISA can be found HERE.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex 32 PBISA 12 carburetors for Peugeot 205

PMS158
Rebuild Kit for Solex 32 PBISA 12 carburetors for Talbot Samba 1000

Rebuild Kit for Solex 32 PBISA 12 carburetors for Talbot Samba 1000

Service kit for the Solex 32 PBISA 12 carburetors as used on, amongst others, the:

  • Talbot Samba 1000 LE - 954 cc
  • Talbot Samba 1000 LS - 954 cc

Please note that Citroën also used the 32 PBISA 12 but that the service kit for the Citroën version differs in detail from this set.
The Citroën version can be found HERE.

This set contains, amongst others, the following parts to service 1 carburettor:

  • Top Cover Gasket
  • 2 x Manifold Gasket
  • Pump Diaphragm
  • Flexible (Nitrile) Pump Jet Gasket
  • Needle Valve assembly; size 1.6
  • Various Rubber (Viton) O-Rings
  • Various Copper Washers

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

The exploded view drawing of the Solex PBISA can be found HERE.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex 32 PBISA 12 carburetors for Talbot Samba 1000

PMS114
Rebuild Kit for Solex 34 PBISA carburetors

Basic Rebuild Kit for Solex 34 PBISA carburetors

Basic Service kit for the Solex 34 PBISA carburetors.

This set contains the following parts to service 1 carburettor:

  • Needle Valve assembly; size 1.5 - Number 5 in the drawing
  • Pump Diaphragm - Number 11 in the drawing
  • Top Cover Gasket - Number 22 in the drawing
  • Flexible (Nitrile) Pump Jet Gasket - Number 41 in the drawing
  • Throttle Body to Spacer Gasket - Number 42 in the drawing
  • Throttle Body to Manifold Gasket - Number 43 in the drawing
  • Various Copper Washers

The exploded view drawing of the Solex PBISA can be found HERE.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex 34 PBISA carburetors

PMS114/1
Elaborate Rebuild Kit for Solex 34 PBISA carburetors - PMS114/1

Elaborate Rebuild Kit for Solex 34 PBISA carburetors - PMS114/1

Elaborate Service kit for the Solex 34 PBISA carburetors.

This set contains the following parts from our Basic Rebuild Kit to service 1 carburettor:

  • Needle Valve assembly; size 1.5 - Number 5 in the drawing
  • Pump Diaphragm - Number 11 in the drawing
  • Top Cover Gasket - Number 22 in the drawing
  • Flexible (Nitrile) Pump Jet Gasket - Number 41 in the drawing
  • Throttle Body to Spacer Gasket - Number 42 in the drawing
  • Throttle Body to Manifold Gasket - Number 43 in the drawing
  • Various Copper Washers

with additionally:

  • Idle jet - Size 50 - Number 6 in the drawing
  • Main jet - Size 135 - Number 18 in the drawing

The exploded view drawing of the Solex PBISA can be found HERE.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS114/1

Elaborate Rebuild Kit for Solex 34 PBISA carburetors - PMS114/1

PMS114
Basic Rebuild Kit for Solex 34 PBISA carburetors for Fiat Ducato

Basic Rebuild Kit for Solex 34 PBISA carburetors for Fiat Ducato

Basic Service kit for the Solex 34 PBISA carburetors as used on, amongst others the:

  • Fiat Ducato Van - 1976 cc
  • Fiat Ducato Van - 1971 cc

This set contains the following parts to service 1 carburettor:

  • Needle Valve assembly; size 1.5 - Number 5 in the drawing
  • Pump Diaphragm - Number 11 in the drawing
  • Top Cover Gasket - Number 22 in the drawing
  • Flexible (Nitrile) Pump Jet Gasket - Number 41 in the drawing
  • Throttle Body to Spacer Gasket - Number 42 in the drawing
  • Throttle Body to Manifold Gasket - Number 43 in the drawing
  • Various Copper Washers

The exploded view drawing of the Solex PBISA can be found HERE.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Basic Rebuild Kit for Solex 34 PBISA carburetors for Fiat Ducato

PMS114/1
Elaborate Rebuild Kit for Solex 34 PBISA carburetors for Fiat Ducato - PMS114/1

Elaborate Rebuild Kit for Solex 34 PBISA carburetors for Fiat Ducato - PMS114/1

Elaborate Service kit for the Solex 34 PBISA carburetors as used on, amongst others the:

  • Fiat Ducato Van - 1976 cc
  • Fiat Ducato Van - 1971 cc

This set contains the following parts from our Basic Rebuild Kit to service 1 carburettor:

  • Needle Valve assembly; size 1.5 - Number 5 in the drawing
  • Pump Diaphragm - Number 11 in the drawing
  • Top Cover Gasket - Number 22 in the drawing
  • Flexible (Nitrile) Pump Jet Gasket - Number 41 in the drawing
  • Throttle Body to Spacer Gasket - Number 42 in the drawing
  • Throttle Body to Manifold Gasket - Number 43 in the drawing
  • Various Copper Washers

with additionally:

  • Idle jet - Size 50 - Number 6 in the drawing
  • Main jet - Size 135 - Number 18 in the drawing

The exploded view drawing of the Solex PBISA can be found HERE.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS114/1

Elaborate Rebuild Kit for Solex 34 PBISA carburetors for Fiat Ducato - PMS114/1

PMS114
Basic Rebuild Kit for Solex 34 PBISA 5 carburetors for Peugeot 204

Basic Rebuild Kit for Solex 34 PBISA 5 carburetors for Peugeot 204

Basic Service kit for the Solex 34 PBISA 5 carburetors as used on, amongst others the:

  • Peugeot 204 - XK5 engine - 1130 cc

This set contains the following parts to service 1 carburettor:

  • Needle Valve assembly; size 1.5 - Number 5 in the drawing
  • Pump Diaphragm - Number 11 in the drawing
  • Top Cover Gasket - Number 22 in the drawing
  • Flexible (Nitrile) Pump Jet Gasket - Number 41 in the drawing
  • Throttle Body to Spacer Gasket - Number 42 in the drawing
  • Throttle Body to Manifold Gasket - Number 43 in the drawing
  • Various Copper Washers

The exploded view drawing of the Solex PBISA can be found HERE.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Basic Rebuild Kit for Solex 34 PBISA 5 carburetors for Peugeot 204

PMS114/1
Elaborate Rebuild Kit for Solex 34 PBISA 5 carburetors for Peugeot 204 - PMS114/1

Elaborate Rebuild Kit for Solex 34 PBISA 5 carburetors for Peugeot 204 - PMS114/1

Elaborate Service kit for the Solex 34 PBISA 5 carburetors as used on, amongst others the:

  • Peugeot 204 - XK5 engine - 1130 cc

This set contains the following parts from our Basic Rebuild Kit to service 1 carburettor:

  • Needle Valve assembly; size 1.5 - Number 5 in the drawing
  • Pump Diaphragm - Number 11 in the drawing
  • Top Cover Gasket - Number 22 in the drawing
  • Flexible (Nitrile) Pump Jet Gasket - Number 41 in the drawing
  • Throttle Body to Spacer Gasket - Number 42 in the drawing
  • Throttle Body to Manifold Gasket - Number 43 in the drawing
  • Various Copper Washers

with additionally:

  • Idle jet - Size 50 - Number 6 in the drawing
  • Main jet - Size 135 - Number 18 in the drawing

The exploded view drawing of the Solex PBISA can be found HERE.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS114/1

Elaborate Rebuild Kit for Solex 34 PBISA 5 carburetors for Peugeot 204 - PMS114/1

PMS114
Basic Rebuild Kit for Solex 34 PBISA 3-4-5 carburetors for Peugeot 304

Basic Rebuild Kit for Solex 34 PBISA 3-4-5 carburetors for Peugeot 304

Basic Service kit for the Solex 34 PBISA 3-4-5 carburetors as used on, amongst others the:

  • Peugeot 304 - XL3 engine - 1130 cc

This set contains the following parts to service 1 carburettor:

  • Needle Valve assembly; size 1.5 - Number 5 in the drawing
  • Pump Diaphragm - Number 11 in the drawing
  • Top Cover Gasket - Number 22 in the drawing
  • Flexible (Nitrile) Pump Jet Gasket - Number 41 in the drawing
  • Throttle Body to Spacer Gasket - Number 42 in the drawing
  • Throttle Body to Manifold Gasket - Number 43 in the drawing
  • Various Copper Washers

The exploded view drawing of the Solex PBISA can be found HERE.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Basic Rebuild Kit for Solex 34 PBISA 3-4-5 carburetors for Peugeot 304

PMS114/1
Elaborate Rebuild Kit for Solex 34 PBISA 3-4-5 carburetors for Peugeot 304 - PMS114/1

Elaborate Rebuild Kit for Solex 34 PBISA 3-4-5 carburetors for Peugeot 304 - PMS114/1

Elaborate Service kit for the Solex 34 PBISA 3-4-5 carburetors as used on, amongst others the:

  • Peugeot 304 - XL3 engine - 1130 cc

This set contains the following parts from our Basic Rebuild Kit to service 1 carburettor:

  • Needle Valve assembly; size 1.5 - Number 5 in the drawing
  • Pump Diaphragm - Number 11 in the drawing
  • Top Cover Gasket - Number 22 in the drawing
  • Flexible (Nitrile) Pump Jet Gasket - Number 41 in the drawing
  • Throttle Body to Spacer Gasket - Number 42 in the drawing
  • Throttle Body to Manifold Gasket - Number 43 in the drawing
  • Various Copper Washers

with additionally:

  • Idle jet - Size 50 - Number 6 in the drawing
  • Main jet - Size 135 - Number 18 in the drawing

The exploded view drawing of the Solex PBISA can be found HERE.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS114/1

Elaborate Rebuild Kit for Solex 34 PBISA 3-4-5 carburetors for Peugeot 304 - PMS114/1

PMS114
Basic Rebuild Kit for Solex 34 PBISA 5 carburetors for Peugeot 305

Basic Rebuild Kit for Solex 34 PBISA 5 carburetors for Peugeot 305

Basic Service kit for the Solex 34 PBISA 5 carburetors as used on, amongst others the:

  • Peugeot 305 GL - XL5 engine - 1290 cc
  • Peugeot 305 GR - XL5 engine - 1290 cc

This set contains the following parts to service 1 carburettor:

  • Needle Valve assembly; size 1.5 - Number 5 in the drawing
  • Pump Diaphragm - Number 11 in the drawing
  • Top Cover Gasket - Number 22 in the drawing
  • Flexible (Nitrile) Pump Jet Gasket - Number 41 in the drawing
  • Throttle Body to Spacer Gasket - Number 42 in the drawing
  • Throttle Body to Manifold Gasket - Number 43 in the drawing
  • Various Copper Washers

The exploded view drawing of the Solex PBISA can be found HERE.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Basic Rebuild Kit for Solex 34 PBISA 5 carburetors for Peugeot 305

PMS114/1
Elaborate Rebuild Kit for Solex 34 PBISA 5 carburetors for Peugeot 305 - PMS114/1

Elaborate Rebuild Kit for Solex 34 PBISA 5 carburetors for Peugeot 305 - PMS114/1

Newly arrived Elaborate Rebuild Kit for Solex 34 PBISA 5 carburetors for Peugeot 305 - PMS114/1

Elaborate Service kit for the Solex 34 PBISA 5 carburetors as used on, amongst others the:

  • Peugeot 305 GL - XL5 engine - 1290 cc
  • Peugeot 305 GR - XL5 engine - 1290 cc

This set contains the following parts from our Basic Rebuild Kit to service 1 carburettor:

  • Needle Valve assembly; size 1.5 - Number 5 in the drawing
  • Pump Diaphragm - Number 11 in the drawing
  • Top Cover Gasket - Number 22 in the drawing
  • Flexible (Nitrile) Pump Jet Gasket - Number 41 in the drawing
  • Throttle Body to Spacer Gasket - Number 42 in the drawing
  • Throttle Body to Manifold Gasket - Number 43 in the drawing
  • Various Copper Washers

with additionally:

  • Idle jet - Size 50 - Number 6 in the drawing
  • Main jet - Size 135 - Number 18 in the drawing

The exploded view drawing of the Solex PBISA can be found HERE.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Article number: PMS114/1

Elaborate Rebuild Kit for Solex 34 PBISA 5 carburetors for Peugeot 305 - PMS114/1

PMS120
Service Kit for Solex 40 PCIS 3 and 2-3 carburettors for Citroen AK

Service Kit for Solex 40 PCIS 3 and 2-3 carburettors for Citroen AK

Service kit for the Solex 40 PCIS 3 and Solex 40 PCIS 2-3 carburetors as fitted to, amongst others, the:

  • Citroën AK - 3 CV - 602 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Carburetor-to-manifold gasket
  • Pump diaphragm
  • Needle Valve assembly in size 1,3
  • Various Copper Washers

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Solex 40 PCIS 3 and 2-3 carburettors for Citroen AK

PMS120
Service Kit for Solex 40 PCIS 3 and 2-3 carburettors for Citroen Ami 6

Service Kit for Solex 40 PCIS 3 and 2-3 carburettors for Citroen Ami 6

Service kit for the Solex 40 PCIS 3 and Solex 40 PCIS 2-3 carburetors as fitted to, amongst others, the:

  • 1963 - 1968 Citroën Ami 6 - 3 CV - 602 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Carburetor-to-manifold gasket
  • Pump diaphragm
  • Needle Valve assembly in size 1,3
  • Various Copper Washers

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Solex 40 PCIS 3 and 2-3 carburettors for Citroen Ami 6

PMS120
Service Kit for Solex 40 PCIS 3 and 2-3 carburettors for Citroen Dyane 6

Service Kit for Solex 40 PCIS 3 and 2-3 carburettors for Citroen Dyane 6

Service kit for the Solex 40 PCIS 3 and Solex 40 PCIS 2-3 carburetors as fitted to, amongst others, the:

  • Citroën Dyane 6 - 3 CV - 602 cc

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

Contains the parts to service 1 carburettor.

Contains, amongst others, the following parts:

  • Top Cover Gasket
  • Carburetor-to-manifold gasket
  • Pump diaphragm
  • Needle Valve assembly in size 1,3
  • Various Copper Washers

This is a Carburetor City service kit of outstanding Italian manufacture.

Service Kit for Solex 40 PCIS 3 and 2-3 carburettors for Citroen Dyane 6

FR4201
Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Hanomag

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Hanomag

Service Kit for Solex Pierburg 30 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 30 series carburetors as, amongst others, some Hanomag models.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • Isolator block
  • Copper washer
  • Aluminum washer
  • Fiber Washer

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Hanomag

FR4201
Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Mercedes

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Mercedes

Service Kit for Solex Pierburg 30 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 30 series carburetors as used on, amongst others, some Mercedes Benz models.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • Isolator block
  • Copper washer
  • Aluminum washer
  • Fiber Washer

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Mercedes

FR4201
Service Kit for Solex Pierburg 30 PDSI carburetors for Opel Kadett

Service Kit for Solex Pierburg 30 PDSI carburetors for Opel Kadett

Service Kit for Solex Pierburg 30 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 30 series carburetors as used on, amongst others, the:

  • 1974 - 1979 Opel Kadett C 1.0 N
  • 1974 - 1979 Opel Kadett C 1.0 S (Export)
  • 1973 - 1979 Opel Kadett C 1.2 N (52 PS)

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • Isolator block
  • Copper washer
  • Aluminum washer
  • Fiber Washer

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 30 PDSI carburetors for Opel Kadett

FR4201
Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Opel Olympia

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Opel Olympia

Service Kit for Solex Pierburg 30 PDSI carburetors.

Service kit for the Solex and Pierburg PDSI 30 series carburetors as used on, amongst others, on the following cars:

  • 1974 - 1979 Opel Olympia C 1.0 N
  • 1973 - 1979 Opel Olympia C 1.0 S (Export)
  • 1973 - 1979 Opel Olympia C 1.2 N (52 PS)
  • 1976 - 1979 Opel Olympia C 1.2 N (55 PS)

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • Isolator block
  • Copper washer
  • Aluminum washer
  • Fiber Washer

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex Pierburg 30 PDSI carburetors for Opel Olympia

FR3622
Service Kit for Solex Pierburg 32 PDSI carburetors for Ford Taunus 12M P4 and P4 TS

Service Kit for Solex Pierburg 32 PDSI carburetors for Ford Taunus 12M P4 and P4 TS

Service kit for the Solex and Pierburg PDSI 32 series carburetors as, amongst others, used on the following cars:

  • 1968 - 1971 Ford Taunus 12M P4 1200 - 1300 - 1500
  • 1968 - 1971 Ford Taunus 12M TS P4

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Complete needle valve size 150
  • Float chamber gasket
  • Base gaskets
  • Various copper washers
  • Various aluminum washers

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Service Kit for Solex Pierburg 32 PDSI carburetors for Ford Taunus 12M P4 and P4 TS

PMS137

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Ascona

Rebuild kit for the Solex and Pierburg PDSI 35 series carburetors as used on, amongst others, the:

  • 1972 - 1975 Opel Ascona A 1200
  • 1970 - 1975 Opel Ascona A 1600 N
  • 1975 - 1981 Opel Ascona B 1200
  • 1979 - 1981 Opel Ascona B 1300 N
  • 1975 - 1978 Opel Ascona B 1600
  • 1976 - 1981 Opel Ascona B 1900 N
  • 1981 Opel Ascona C 1300 N & S

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • Various copper washers
  • Various fiber washers
  • Various rubber O-rings

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Ascona

PMS137
Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Kadett

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Kadett

Rebuild kit for the Solex and Pierburg PDSI 35 series carburetors as used on, amongst others, the:

  • 1970 - 1973 Opel Kadett B 1100 N & S
  • 1971 - 1973 Opel Kadett B 1200 S
  • 1973 - 1979 Opel Kadett C 1200 N & S
  • 1979 - 1984 Opel Kadett D 1000
  • 1979 - 1984 Opel Kadett D 1200 N & S
  • 1979 - 1984 Opel Kadett D 1300 N
  • 1984 - 1986 Opel Kadett E 1300 N

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • Various copper washers
  • Various fiber washers
  • Various rubber O-rings

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Kadett

PMS137
Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Manta

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Manta

Rebuild kit for the Solex and Pierburg PDSI 35 series carburetors as used on, amongst others, the:

  • 1972 - 1975 Opel Manta A 1200
  • 1970 - 1975 Opel Manta A 1600 N
  • 1975 - 1981 Opel Manta B 1200
  • 1979 - 1981 Opel Manta B 1300 N
  • 1975 - 1978 Opel Manta B 1600
  • 1976 - 1981 Opel Manta B 1900 N
  • 1981 Opel Manta 1300 N & S

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • Various copper washers
  • Various fiber washers
  • Various rubber O-rings

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Manta

PMS137
Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Rekord

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Rekord

Rebuild kit for the Solex and Pierburg PDSI 35 series carburetors as used on, amongst others, the:

  • 1972 - 1977 Opel Rekord D 1700 N & L
  • 1975 - 1977 Opel Rekord D 1900 N
  • 1977 - 1982 Opel Rekord E 1700 N & 1900 N

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • Various copper washers
  • Various fiber washers
  • Various rubber O-rings

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Opel Rekord

PMS137
Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Vauxhall Astra

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Vauxhall Astra

Rebuild kit for the Solex and Pierburg PDSI 35 series carburetors as used on, amongst others, the:

  • 1980 - 1984 Vauxhall Astra 1200

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Complete needle valve size 175
  • Float chamber gasket
  • Base gasket
  • Various copper washers
  • Various fiber washers
  • Various rubber O-rings

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

Although these carburetors were originally delivered on the above cars, they are often transplanted onto other cars and engines so the range of vehicles that these service kits might fit is much broader.

Alternatively, your car might no longer be equipped with the carburetor that it left the factory with.

So, please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex Pierburg 35 PDSI carburetors for Vauxhall Astra

PMS210
Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors

Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors

Service Kit for the Solex and Pierburg 36-40 PDSI carburetors.

Contains, amongst others, the following parts to service 1 carburettor:

  • Pump Diaphragm
  • Complete needle valve - size 200
  • Float chamber gasket
  • Choke gasket & O-Ring
  • Copper washer

Please note that this carburetor was marketed as well as under the Solex brand as under the Pierburg brand.

Please compare your old parts carefully with the ones in the picture as there are many different versions of this carburetor.

This is a Carburetor City service kit of superior Italian manufacture.

Rebuild Kit for Solex Pierburg 36-40 PDSI carburetors

PMS210